linux-spi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Michael Williamson <michael.williamson@criticallink.com>
To: spi-devel-general@lists.sourceforge.net,
	linux-arm-kernel@lists.infradead.org,
	davinci-linux-open-source@linux.davincidsp.com
Cc: khilman@deeprootsystems.com, grant.likely@secretlab.ca,
	dbrownell@users.sourceforge.net,
	Michael Williamson <michael.williamson@criticallink.com>
Subject: [PATCH v1] davinci: spi: move event queue parameter to platform data
Date: Fri,  4 Feb 2011 09:09:12 -0500	[thread overview]
Message-ID: <1296828552-11765-1-git-send-email-michael.williamson@criticallink.com> (raw)

For DMA operation, the davinci spi driver needs an event queue number.
Currently, this number is passed as a IORESOURCE_DMA.  This is not
correct, as the event queue is not a DMA channel.  Pass the event queue
via the platform data structure instead.

On dm355 and dm365, move the eventq assignment for spi0 out of resources
array and into platform data.

Signed-off-by: Michael Williamson <michael.williamson@criticallink.com>
---
Changes since v0:
  - combined separate platform patches with driver patch to avoid
    potential regression if doing a bissect.
  - fixed up typo per comments.

 arch/arm/mach-davinci/dm355.c            |    5 +----
 arch/arm/mach-davinci/dm365.c            |    5 +----
 arch/arm/mach-davinci/include/mach/spi.h |   15 ++++++++++-----
 drivers/spi/davinci_spi.c                |   11 +++--------
 4 files changed, 15 insertions(+), 21 deletions(-)

diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index a5f8a80..76364d1 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -403,16 +403,13 @@ static struct resource dm355_spi0_resources[] = {
 		.start = 16,
 		.flags = IORESOURCE_DMA,
 	},
-	{
-		.start = EVENTQ_1,
-		.flags = IORESOURCE_DMA,
-	},
 };
 
 static struct davinci_spi_platform_data dm355_spi0_pdata = {
 	.version 	= SPI_VERSION_1,
 	.num_chipselect = 2,
 	.cshold_bug	= true,
+	.dma_event_q	= EVENTQ_1,
 };
 static struct platform_device dm355_spi0_device = {
 	.name = "spi_davinci",
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index 02d2cc3..4604e72 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -625,6 +625,7 @@ static u64 dm365_spi0_dma_mask = DMA_BIT_MASK(32);
 static struct davinci_spi_platform_data dm365_spi0_pdata = {
 	.version 	= SPI_VERSION_1,
 	.num_chipselect = 2,
+	.dma_event_q	= EVENTQ_3,
 };
 
 static struct resource dm365_spi0_resources[] = {
@@ -645,10 +646,6 @@ static struct resource dm365_spi0_resources[] = {
 		.start = 16,
 		.flags = IORESOURCE_DMA,
 	},
-	{
-		.start = EVENTQ_3,
-		.flags = IORESOURCE_DMA,
-	},
 };
 
 static struct platform_device dm365_spi0_device = {
diff --git a/arch/arm/mach-davinci/include/mach/spi.h b/arch/arm/mach-davinci/include/mach/spi.h
index 38f4da5..0853a5f 100644
--- a/arch/arm/mach-davinci/include/mach/spi.h
+++ b/arch/arm/mach-davinci/include/mach/spi.h
@@ -19,6 +19,8 @@
 #ifndef __ARCH_ARM_DAVINCI_SPI_H
 #define __ARCH_ARM_DAVINCI_SPI_H
 
+#include <mach/edma.h>
+
 #define SPI_INTERN_CS	0xFF
 
 enum {
@@ -39,13 +41,16 @@ enum {
  *		to populate if all chip-selects are internal.
  * @cshold_bug:	set this to true if the SPI controller on your chip requires
  *		a write to CSHOLD bit in between transfers (like in DM355).
+ * @dma_event_q: DMA event_q to use if SPI_IO_TYPE_DMA is used for any device
+ *		on the bus.
  */
 struct davinci_spi_platform_data {
-	u8	version;
-	u8	num_chipselect;
-	u8	intr_line;
-	u8	*chip_sel;
-	bool	cshold_bug;
+	u8			version;
+	u8			num_chipselect;
+	u8			intr_line;
+	u8			*chip_sel;
+	bool			cshold_bug;
+	enum dma_event_q	dma_event_q;
 };
 
 /**
diff --git a/drivers/spi/davinci_spi.c b/drivers/spi/davinci_spi.c
index 6beab99..166a879 100644
--- a/drivers/spi/davinci_spi.c
+++ b/drivers/spi/davinci_spi.c
@@ -790,7 +790,6 @@ static int davinci_spi_probe(struct platform_device *pdev)
 	struct resource *r, *mem;
 	resource_size_t dma_rx_chan = SPI_NO_RESOURCE;
 	resource_size_t	dma_tx_chan = SPI_NO_RESOURCE;
-	resource_size_t	dma_eventq = SPI_NO_RESOURCE;
 	int i = 0, ret = 0;
 	u32 spipc0;
 
@@ -878,17 +877,13 @@ static int davinci_spi_probe(struct platform_device *pdev)
 	r = platform_get_resource(pdev, IORESOURCE_DMA, 1);
 	if (r)
 		dma_tx_chan = r->start;
-	r = platform_get_resource(pdev, IORESOURCE_DMA, 2);
-	if (r)
-		dma_eventq = r->start;
 
 	dspi->bitbang.txrx_bufs = davinci_spi_bufs;
 	if (dma_rx_chan != SPI_NO_RESOURCE &&
-	    dma_tx_chan != SPI_NO_RESOURCE &&
-	    dma_eventq != SPI_NO_RESOURCE) {
+	    dma_tx_chan != SPI_NO_RESOURCE) {
 		dspi->dma.rx_channel = dma_rx_chan;
 		dspi->dma.tx_channel = dma_tx_chan;
-		dspi->dma.eventq = dma_eventq;
+		dspi->dma.eventq = pdata->dma_event_q;
 
 		ret = davinci_spi_request_dma(dspi);
 		if (ret)
@@ -897,7 +892,7 @@ static int davinci_spi_probe(struct platform_device *pdev)
 		dev_info(&pdev->dev, "DMA: supported\n");
 		dev_info(&pdev->dev, "DMA: RX channel: %d, TX channel: %d, "
 				"event queue: %d\n", dma_rx_chan, dma_tx_chan,
-				dma_eventq);
+				pdata->dma_event_q);
 	}
 
 	dspi->get_rx = davinci_spi_rx_buf_u8;
-- 
1.7.0.4

             reply	other threads:[~2011-02-04 14:09 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-02-04 14:09 Michael Williamson [this message]
     [not found] ` <1296828552-11765-1-git-send-email-michael.williamson-wZX4cNJlHJ2sVWG7oymsAA@public.gmane.org>
2011-02-08  7:53   ` [PATCH v1] davinci: spi: move event queue parameter to platform data Nori, Sekhar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1296828552-11765-1-git-send-email-michael.williamson@criticallink.com \
    --to=michael.williamson@criticallink.com \
    --cc=davinci-linux-open-source@linux.davincidsp.com \
    --cc=dbrownell@users.sourceforge.net \
    --cc=grant.likely@secretlab.ca \
    --cc=khilman@deeprootsystems.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=spi-devel-general@lists.sourceforge.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).