From: Axel Lin <axel.lin@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: Samuel Ortiz <sameo@linux.intel.com>,
Juha Yrjola <juha.yrjola@nokia.com>,
Grant Likely <grant.likely@secretlab.ca>,
spi-devel-general@lists.sourceforge.net
Subject: [PATCH] spi: omap2-mcspi: fix omap2_mcspi_probe error handling
Date: Wed, 22 Jun 2011 21:57:57 +0800 [thread overview]
Message-ID: <1308751077.4846.1.camel@phoenix> (raw)
This patch includes below fixes for error handling:
1. return proper error if kcalloc for mcspi->dma_channels fails
2. return proper error if omap2_mcspi_master_setup fails
3. properly release allocated resources in error paths and
improve the naming of goto labels.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
---
drivers/spi/spi-omap2-mcspi.c | 39 +++++++++++++++++++++------------------
1 files changed, 21 insertions(+), 18 deletions(-)
diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
index fde3a2d..74f444d 100644
--- a/drivers/spi/spi-omap2-mcspi.c
+++ b/drivers/spi/spi-omap2-mcspi.c
@@ -1087,7 +1087,7 @@ static int __init omap2_mcspi_probe(struct platform_device *pdev)
struct omap2_mcspi_platform_config *pdata = pdev->dev.platform_data;
struct omap2_mcspi *mcspi;
struct resource *r;
- int status = 0, i;
+ int status, i;
master = spi_alloc_master(&pdev->dev, sizeof *mcspi);
if (master == NULL) {
@@ -1114,12 +1114,12 @@ static int __init omap2_mcspi_probe(struct platform_device *pdev)
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (r == NULL) {
status = -ENODEV;
- goto err1;
+ goto err_put_master;
}
if (!request_mem_region(r->start, resource_size(r),
dev_name(&pdev->dev))) {
status = -EBUSY;
- goto err1;
+ goto err_put_master;
}
r->start += pdata->regs_offset;
@@ -1129,7 +1129,7 @@ static int __init omap2_mcspi_probe(struct platform_device *pdev)
if (!mcspi->base) {
dev_dbg(&pdev->dev, "can't ioremap MCSPI\n");
status = -ENOMEM;
- goto err2;
+ goto err_release_mem_region;
}
mcspi->dev = &pdev->dev;
@@ -1143,8 +1143,10 @@ static int __init omap2_mcspi_probe(struct platform_device *pdev)
sizeof(struct omap2_mcspi_dma),
GFP_KERNEL);
- if (mcspi->dma_channels == NULL)
- goto err2;
+ if (mcspi->dma_channels == NULL) {
+ status = -ENOMEM;
+ goto err_iounmap;
+ }
for (i = 0; i < master->num_chipselect; i++) {
char dma_ch_name[14];
@@ -1156,7 +1158,7 @@ static int __init omap2_mcspi_probe(struct platform_device *pdev)
if (!dma_res) {
dev_dbg(&pdev->dev, "cannot get DMA RX channel\n");
status = -ENODEV;
- break;
+ goto err_free_dma_channels;
}
mcspi->dma_channels[i].dma_rx_channel = -1;
@@ -1167,7 +1169,7 @@ static int __init omap2_mcspi_probe(struct platform_device *pdev)
if (!dma_res) {
dev_dbg(&pdev->dev, "cannot get DMA TX channel\n");
status = -ENODEV;
- break;
+ goto err_free_dma_channels;
}
mcspi->dma_channels[i].dma_tx_channel = -1;
@@ -1176,23 +1178,24 @@ static int __init omap2_mcspi_probe(struct platform_device *pdev)
pm_runtime_enable(&pdev->dev);
- if (status || omap2_mcspi_master_setup(mcspi) < 0)
- goto err3;
+ status = omap2_mcspi_master_setup(mcspi);
+ if (status)
+ goto err_free_dma_channels;
status = spi_register_master(master);
if (status < 0)
- goto err4;
+ goto err_free_dma_channels;
- return status;
+ return 0;
-err4:
- spi_master_put(master);
-err3:
+err_free_dma_channels:
kfree(mcspi->dma_channels);
-err2:
- release_mem_region(r->start, resource_size(r));
+err_iounmap:
iounmap(mcspi->base);
-err1:
+err_release_mem_region:
+ release_mem_region(r->start, resource_size(r));
+err_put_master:
+ spi_master_put(master);
return status;
}
--
1.7.4.1
next reply other threads:[~2011-06-22 13:57 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-22 13:57 Axel Lin [this message]
2011-06-22 15:29 ` [PATCH] spi: omap2-mcspi: fix omap2_mcspi_probe error handling Grant Likely
[not found] ` <BANLkTimQ55xBwzoxnSAKznG-GTHZ+LtShw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2011-06-27 4:23 ` Axel Lin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1308751077.4846.1.camel@phoenix \
--to=axel.lin@gmail.com \
--cc=grant.likely@secretlab.ca \
--cc=juha.yrjola@nokia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=sameo@linux.intel.com \
--cc=spi-devel-general@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).