From: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
To: spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Cc: patches-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
"Uwe Kleine-König"
<u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
"Sascha Hauer" <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: [PATCH v2 1/7] spi/imx: do not make copy of spi_imx_devtype_data
Date: Sun, 10 Jul 2011 01:16:35 +0800 [thread overview]
Message-ID: <1310231801-18761-2-git-send-email-shawn.guo@linaro.org> (raw)
In-Reply-To: <1310231801-18761-1-git-send-email-shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
spi_imx_devtype_data has already been driver private data. There is
really no need to make a copy in spi_imx_data. Instead, a reference
pointer works perfectly fine.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Grant Likely <grant.likely@secretlab.ca>
---
drivers/spi/spi-imx.c | 24 ++++++++++++------------
1 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 69d6dba..1c55dc9 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -96,7 +96,7 @@ struct spi_imx_data {
const void *tx_buf;
unsigned int txfifo; /* number of words pushed in tx FIFO */
- struct spi_imx_devtype_data devtype_data;
+ struct spi_imx_devtype_data *devtype_data;
};
#define MXC_SPI_BUF_RX(type) \
@@ -539,7 +539,7 @@ static void __maybe_unused mx1_reset(struct spi_imx_data *spi_imx)
* These version numbers are taken from the Freescale driver. Unfortunately it
* doesn't support i.MX1, so this entry doesn't match the scheme. :-(
*/
-static struct spi_imx_devtype_data spi_imx_devtype_data[] __devinitdata = {
+static struct spi_imx_devtype_data spi_imx_devtype_data[] = {
#ifdef CONFIG_SPI_IMX_VER_IMX1
[SPI_IMX_VER_IMX1] = {
.intctrl = mx1_intctrl,
@@ -607,21 +607,21 @@ static void spi_imx_chipselect(struct spi_device *spi, int is_active)
static void spi_imx_push(struct spi_imx_data *spi_imx)
{
- while (spi_imx->txfifo < spi_imx->devtype_data.fifosize) {
+ while (spi_imx->txfifo < spi_imx->devtype_data->fifosize) {
if (!spi_imx->count)
break;
spi_imx->tx(spi_imx);
spi_imx->txfifo++;
}
- spi_imx->devtype_data.trigger(spi_imx);
+ spi_imx->devtype_data->trigger(spi_imx);
}
static irqreturn_t spi_imx_isr(int irq, void *dev_id)
{
struct spi_imx_data *spi_imx = dev_id;
- while (spi_imx->devtype_data.rx_available(spi_imx)) {
+ while (spi_imx->devtype_data->rx_available(spi_imx)) {
spi_imx->rx(spi_imx);
spi_imx->txfifo--;
}
@@ -635,12 +635,12 @@ static irqreturn_t spi_imx_isr(int irq, void *dev_id)
/* No data left to push, but still waiting for rx data,
* enable receive data available interrupt.
*/
- spi_imx->devtype_data.intctrl(
+ spi_imx->devtype_data->intctrl(
spi_imx, MXC_INT_RR);
return IRQ_HANDLED;
}
- spi_imx->devtype_data.intctrl(spi_imx, 0);
+ spi_imx->devtype_data->intctrl(spi_imx, 0);
complete(&spi_imx->xfer_done);
return IRQ_HANDLED;
@@ -677,7 +677,7 @@ static int spi_imx_setupxfer(struct spi_device *spi,
} else
BUG();
- spi_imx->devtype_data.config(spi_imx, &config);
+ spi_imx->devtype_data->config(spi_imx, &config);
return 0;
}
@@ -696,7 +696,7 @@ static int spi_imx_transfer(struct spi_device *spi,
spi_imx_push(spi_imx);
- spi_imx->devtype_data.intctrl(spi_imx, MXC_INT_TE);
+ spi_imx->devtype_data->intctrl(spi_imx, MXC_INT_TE);
wait_for_completion(&spi_imx->xfer_done);
@@ -811,7 +811,7 @@ static int __devinit spi_imx_probe(struct platform_device *pdev)
init_completion(&spi_imx->xfer_done);
spi_imx->devtype_data =
- spi_imx_devtype_data[pdev->id_entry->driver_data];
+ &spi_imx_devtype_data[pdev->id_entry->driver_data];
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
@@ -854,9 +854,9 @@ static int __devinit spi_imx_probe(struct platform_device *pdev)
clk_enable(spi_imx->clk);
spi_imx->spi_clk = clk_get_rate(spi_imx->clk);
- spi_imx->devtype_data.reset(spi_imx);
+ spi_imx->devtype_data->reset(spi_imx);
- spi_imx->devtype_data.intctrl(spi_imx, 0);
+ spi_imx->devtype_data->intctrl(spi_imx, 0);
ret = spi_bitbang_start(&spi_imx->bitbang);
if (ret) {
--
1.7.4.1
_______________________________________________
devicetree-discuss mailing list
devicetree-discuss@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/devicetree-discuss
next prev parent reply other threads:[~2011-07-09 17:16 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-09 17:16 [PATCH v2 0/7] Add device tree support for imx spi driver Shawn Guo
[not found] ` <1310231801-18761-1-git-send-email-shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2011-07-09 17:16 ` Shawn Guo [this message]
2011-07-11 7:15 ` [PATCH v2 1/7] spi/imx: do not make copy of spi_imx_devtype_data Lothar Waßmann
[not found] ` <19994.41750.920408.162356-VjFSrY7JcPWvSplVBqRQBQ@public.gmane.org>
2011-07-11 7:31 ` Uwe Kleine-König
2011-07-11 7:49 ` Lothar Waßmann
2011-07-11 7:35 ` Shawn Guo
[not found] ` <20110711073523.GA19105-+NayF8gZjK2ctlrPMvKcciBecyulp+rMXqFh9Ls21Oc@public.gmane.org>
2011-07-11 7:32 ` Lothar Waßmann
[not found] ` <1310231801-18761-2-git-send-email-shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2011-07-15 2:53 ` Grant Likely
2011-07-09 17:16 ` [PATCH v2 2/7] spi/imx: use mx21 to name SPI_IMX_VER_0_0 function and macro Shawn Guo
[not found] ` <1310231801-18761-3-git-send-email-shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2011-07-11 7:35 ` Uwe Kleine-König
[not found] ` <20110711073523.GB13840-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2011-07-15 2:53 ` Grant Likely
2011-07-09 17:16 ` [PATCH v2 3/7] spi/imx: do not use spi_imx2_3 to name SPI_IMX_VER_2_3 " Shawn Guo
[not found] ` <1310231801-18761-4-git-send-email-shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2011-07-15 2:53 ` Grant Likely
2011-07-09 17:16 ` [PATCH v2 4/7] spi/imx: merge type SPI_IMX_VER_0_7 into SPI_IMX_VER_0_4 Shawn Guo
[not found] ` <1310231801-18761-5-git-send-email-shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2011-07-11 7:38 ` Uwe Kleine-König
2011-07-09 17:16 ` [PATCH v2 5/7] spi/imx: use soc name in spi device type naming scheme Shawn Guo
[not found] ` <1310231801-18761-6-git-send-email-shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2011-07-15 2:53 ` Grant Likely
2011-07-09 17:16 ` [PATCH v2 6/7] spi/imx: copy gpio number passed by platform data into driver private data Shawn Guo
[not found] ` <1310231801-18761-7-git-send-email-shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2011-07-11 7:45 ` Uwe Kleine-König
2011-07-09 17:16 ` [PATCH v2 7/7] spi/imx: add device tree probe support Shawn Guo
[not found] ` <1310231801-18761-8-git-send-email-shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2011-07-15 2:53 ` Grant Likely
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1310231801-18761-2-git-send-email-shawn.guo@linaro.org \
--to=shawn.guo-qsej5fyqhm4dnm+yrofe0a@public.gmane.org \
--cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=patches-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
--cc=u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).