From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stephen Warren Subject: [PATCH V3 3/5] staging:iio:magnetometer:ak8975 Don't use irq_to_gpio() Date: Thu, 1 Sep 2011 16:04:34 -0600 Message-ID: <1314914676-28397-8-git-send-email-swarren@nvidia.com> References: <1314914676-28397-1-git-send-email-swarren@nvidia.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Cc: devel@driverdev.osuosl.org, Andrew Chew , Stephen Warren , linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org, Jonathan Cameron , spi-devel-general@lists.sourceforge.net, linux-tegra@vger.kernel.org, Russell King , linux-i2c@vger.kernel.org To: Greg Kroah-Hartman , Jean Delvare , Ben Dooks , Jonathan Cameron , Grant Likely , A Return-path: In-Reply-To: <1314914676-28397-1-git-send-email-swarren@nvidia.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: devel-bounces@linuxdriverproject.org Sender: devel-bounces@linuxdriverproject.org List-Id: linux-spi.vger.kernel.org Tegra doesn't have irq_to_gpio() any more, and ak8975 is included in tegra_defconfig. This causes a build failure. Instead, obtain the GPIO ID corresponding to the chip's IRQ from the new i2c_client field irq_gpio. Signed-off-by: Stephen Warren --- drivers/staging/iio/magnetometer/ak8975.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/drivers/staging/iio/magnetometer/ak8975.c b/drivers/staging/iio/magnetometer/ak8975.c index a17fa9f..14076da 100644 --- a/drivers/staging/iio/magnetometer/ak8975.c +++ b/drivers/staging/iio/magnetometer/ak8975.c @@ -477,7 +477,7 @@ static int ak8975_probe(struct i2c_client *client, int err; /* Grab and set up the supplied GPIO. */ - eoc_gpio = irq_to_gpio(client->irq); + eoc_gpio = client->irq_gpio; /* We may not have a GPIO based IRQ to scan, that is fine, we will poll if so */ -- 1.7.0.4