From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: Kukjin Kim <kgene.kim@samsung.com>,
Grant Likely <grant.likely@secretlab.ca>
Cc: linux-samsung-soc@vger.kernel.org,
spi-devel-general@lists.sourceforge.net,
Mark Brown <broonie@opensource.wolfsonmicro.com>
Subject: [PATCH 2/2] spi/s3c64xx: Implement runtime PM support
Date: Mon, 5 Dec 2011 16:50:13 +0000 [thread overview]
Message-ID: <1323103813-5325-2-git-send-email-broonie@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <1323103813-5325-1-git-send-email-broonie@opensource.wolfsonmicro.com>
Enable and disable the clocks to the SPI controller using runtime PM. This
serves the dual purpose of reducing power consumption a little and letting
the core know when the device is idle.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
drivers/spi/spi-s3c64xx.c | 39 +++++++++++++++++++++++++++++++++++++++
1 files changed, 39 insertions(+), 0 deletions(-)
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index fef1c90..9031783 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -25,6 +25,7 @@
#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/spi/spi.h>
#include <mach/dma.h>
@@ -782,6 +783,8 @@ static void s3c64xx_spi_work(struct work_struct *work)
while (!acquire_dma(sdd))
msleep(10);
+ pm_runtime_get_sync(&sdd->pdev->dev);
+
spin_lock_irqsave(&sdd->lock, flags);
while (!list_empty(&sdd->queue)
@@ -810,6 +813,8 @@ static void s3c64xx_spi_work(struct work_struct *work)
/* Free DMA channels */
sdd->ops->release(sdd->rx_dma.ch, &s3c64xx_spi_dma_client);
sdd->ops->release(sdd->tx_dma.ch, &s3c64xx_spi_dma_client);
+
+ pm_runtime_put(&sdd->pdev->dev);
}
static int s3c64xx_spi_transfer(struct spi_device *spi,
@@ -892,6 +897,8 @@ static int s3c64xx_spi_setup(struct spi_device *spi)
goto setup_exit;
}
+ pm_runtime_get_sync(&sdd->pdev->dev);
+
/* Check if we can provide the requested rate */
if (!sci->clk_from_cmu) {
u32 psr, speed;
@@ -924,6 +931,8 @@ static int s3c64xx_spi_setup(struct spi_device *spi)
err = -EINVAL;
}
+ pm_runtime_put(&sdd->pdev->dev);
+
setup_exit:
/* setup() returns with device de-selected */
@@ -1159,6 +1168,8 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev)
mem_res->end, mem_res->start,
sdd->rx_dma.dmach, sdd->tx_dma.dmach);
+ pm_runtime_enable(&pdev->dev);
+
return 0;
err9:
@@ -1192,6 +1203,8 @@ static int s3c64xx_spi_remove(struct platform_device *pdev)
struct resource *mem_res;
unsigned long flags;
+ pm_runtime_disable(&pdev->dev);
+
spin_lock_irqsave(&sdd->lock, flags);
sdd->state |= SUSPND;
spin_unlock_irqrestore(&sdd->lock, flags);
@@ -1272,8 +1285,34 @@ static int s3c64xx_spi_resume(struct device *dev)
}
#endif /* CONFIG_PM */
+#ifdef CONFIG_PM_RUNTIME
+static int s3c64xx_spi_runtime_suspend(struct device *dev)
+{
+ struct spi_master *master = spi_master_get(dev_get_drvdata(dev));
+ struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master);
+
+ clk_disable(sdd->clk);
+ clk_disable(sdd->src_clk);
+
+ return 0;
+}
+
+static int s3c64xx_spi_runtime_resume(struct device *dev)
+{
+ struct spi_master *master = spi_master_get(dev_get_drvdata(dev));
+ struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master);
+
+ clk_enable(sdd->src_clk);
+ clk_enable(sdd->clk);
+
+ return 0;
+}
+#endif /* CONFIG_PM_RUNTIME */
+
static struct dev_pm_ops s3c64xx_spi_pm = {
SET_SYSTEM_SLEEP_PM_OPS(s3c64xx_spi_suspend, s3c64xx_spi_resume)
+ SET_RUNTIME_PM_OPS(s3c64xx_spi_runtime_suspend,
+ s3c64xx_spi_runtime_resume, NULL)
};
static struct platform_driver s3c64xx_spi_driver = {
--
1.7.7.3
next prev parent reply other threads:[~2011-12-05 16:50 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-05 16:50 [PATCH 1/2] spi/s3c64xx: Convert to dev_pm_ops Mark Brown
2011-12-05 16:50 ` Mark Brown [this message]
2011-12-05 21:41 ` [PATCH 2/2] spi/s3c64xx: Implement runtime PM support Linus Walleij
2011-12-05 23:16 ` Mark Brown
[not found] ` <20111205231647.GA21083-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
2011-12-06 14:05 ` Linus Walleij
2011-12-13 14:49 ` Heiko Stübner
2011-12-13 15:02 ` Heiko Stübner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1323103813-5325-2-git-send-email-broonie@opensource.wolfsonmicro.com \
--to=broonie@opensource.wolfsonmicro.com \
--cc=grant.likely@secretlab.ca \
--cc=kgene.kim@samsung.com \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=spi-devel-general@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).