From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: Kukjin Kim <kgene.kim@samsung.com>,
Grant Likely <grant.likely@secretlab.ca>,
Linus Walleij <linus.walleij@linaro.org>
Cc: linux-samsung-soc@vger.kernel.org,
spi-devel-general@lists.sourceforge.net,
Mark Brown <broonie@opensource.wolfsonmicro.com>
Subject: [PATCH 1/2] spi/s3c64xx: Convert to devm_request_and_ioremap()
Date: Thu, 28 Jun 2012 14:23:30 +0100 [thread overview]
Message-ID: <1340889811-7524-1-git-send-email-broonie@opensource.wolfsonmicro.com> (raw)
Saves some error handling and a small amount of code.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
drivers/spi/spi-s3c64xx.c | 25 +------------------------
1 file changed, 1 insertion(+), 24 deletions(-)
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index f4e2341..b7aeb5d 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -1028,19 +1028,7 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev)
/* the spi->mode bits understood by this driver: */
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
- if (request_mem_region(mem_res->start,
- resource_size(mem_res), pdev->name) == NULL) {
- dev_err(&pdev->dev, "Req mem region failed\n");
- ret = -ENXIO;
- goto err0;
- }
-
- sdd->regs = ioremap(mem_res->start, resource_size(mem_res));
- if (sdd->regs == NULL) {
- dev_err(&pdev->dev, "Unable to remap IO\n");
- ret = -ENXIO;
- goto err1;
- }
+ sdd->regs = devm_request_and_ioremap(&pdev->dev, mem_res);
if (sci->cfg_gpio == NULL || sci->cfg_gpio(pdev)) {
dev_err(&pdev->dev, "Unable to config gpio\n");
@@ -1124,10 +1112,6 @@ err4:
clk_put(sdd->clk);
err3:
err2:
- iounmap((void *) sdd->regs);
-err1:
- release_mem_region(mem_res->start, resource_size(mem_res));
-err0:
platform_set_drvdata(pdev, NULL);
spi_master_put(master);
@@ -1138,7 +1122,6 @@ static int s3c64xx_spi_remove(struct platform_device *pdev)
{
struct spi_master *master = spi_master_get(platform_get_drvdata(pdev));
struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master);
- struct resource *mem_res;
pm_runtime_disable(&pdev->dev);
@@ -1154,12 +1137,6 @@ static int s3c64xx_spi_remove(struct platform_device *pdev)
clk_disable(sdd->clk);
clk_put(sdd->clk);
- iounmap((void *) sdd->regs);
-
- mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (mem_res != NULL)
- release_mem_region(mem_res->start, resource_size(mem_res));
-
platform_set_drvdata(pdev, NULL);
spi_master_put(master);
--
1.7.10
next reply other threads:[~2012-06-28 13:23 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-28 13:23 Mark Brown [this message]
2012-06-28 13:23 ` [PATCH 2/2] spi/s3c64xx: Expand S3C64XX_SPI_{DE,}ACT macros at call sites Mark Brown
2012-06-28 18:52 ` Linus Walleij
2012-07-16 23:52 ` Kukjin Kim
2012-07-17 7:44 ` Mark Brown
2012-06-28 18:51 ` [PATCH 1/2] spi/s3c64xx: Convert to devm_request_and_ioremap() Linus Walleij
2012-06-29 1:20 ` Mark Brown
-- strict thread matches above, loose matches on Subject: below --
2012-07-04 16:11 Mark Brown
2012-07-05 8:41 ` Sylwester Nawrocki
2012-07-05 9:50 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1340889811-7524-1-git-send-email-broonie@opensource.wolfsonmicro.com \
--to=broonie@opensource.wolfsonmicro.com \
--cc=grant.likely@secretlab.ca \
--cc=kgene.kim@samsung.com \
--cc=linus.walleij@linaro.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=spi-devel-general@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).