From: Matt Porter <mporter-l0cyMroinI0@public.gmane.org>
To: vinod.koul-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org,
cjb-2X9k7bc8m7Mdnm+yROfE0A@public.gmane.org,
grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org
Cc: Linux DaVinci Kernel List
<davinci-linux-open-source-VycZQUHpC/PFrsHnngEfi1aTQe2KTcn/@public.gmane.org>,
Sekhar Nori <nsekhar-l0cyMroinI0@public.gmane.org>,
Linux MMC List
<linux-mmc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
Linux Kernel Mailing List
<linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
Linux SPI Devel List
<spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org>,
Linux ARM Kernel List
<linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>
Subject: [PATCH v3 3/3] spi: spi-davinci: convert to DMA engine API
Date: Wed, 22 Aug 2012 21:09:36 -0400 [thread overview]
Message-ID: <1345684176-21472-4-git-send-email-mporter@ti.com> (raw)
In-Reply-To: <1345684176-21472-1-git-send-email-mporter-l0cyMroinI0@public.gmane.org>
Removes use of the DaVinci EDMA private DMA API and replaces
it with use of the DMA engine API.
Signed-off-by: Matt Porter <mporter-l0cyMroinI0@public.gmane.org>
---
drivers/spi/spi-davinci.c | 292 ++++++++++++++++++++-------------------------
1 file changed, 130 insertions(+), 162 deletions(-)
diff --git a/drivers/spi/spi-davinci.c b/drivers/spi/spi-davinci.c
index 9b2901f..c1ec52d 100644
--- a/drivers/spi/spi-davinci.c
+++ b/drivers/spi/spi-davinci.c
@@ -25,13 +25,14 @@
#include <linux/platform_device.h>
#include <linux/err.h>
#include <linux/clk.h>
+#include <linux/dmaengine.h>
#include <linux/dma-mapping.h>
+#include <linux/edma.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi_bitbang.h>
#include <linux/slab.h>
#include <mach/spi.h>
-#include <mach/edma.h>
#define SPI_NO_RESOURCE ((resource_size_t)-1)
@@ -113,14 +114,6 @@
#define SPIDEF 0x4c
#define SPIFMT0 0x50
-/* We have 2 DMA channels per CS, one for RX and one for TX */
-struct davinci_spi_dma {
- int tx_channel;
- int rx_channel;
- int dummy_param_slot;
- enum dma_event_q eventq;
-};
-
/* SPI Controller driver's private data. */
struct davinci_spi {
struct spi_bitbang bitbang;
@@ -134,11 +127,14 @@ struct davinci_spi {
const void *tx;
void *rx;
-#define SPI_TMP_BUFSZ (SMP_CACHE_BYTES + 1)
- u8 rx_tmp_buf[SPI_TMP_BUFSZ];
int rcount;
int wcount;
- struct davinci_spi_dma dma;
+
+ struct dma_chan *dma_rx;
+ struct dma_chan *dma_tx;
+ int dma_rx_chnum;
+ int dma_tx_chnum;
+
struct davinci_spi_platform_data *pdata;
void (*get_rx)(u32 rx_data, struct davinci_spi *);
@@ -496,21 +492,23 @@ out:
return errors;
}
-static void davinci_spi_dma_callback(unsigned lch, u16 status, void *data)
+static void davinci_spi_dma_rx_callback(void *data)
{
- struct davinci_spi *dspi = data;
- struct davinci_spi_dma *dma = &dspi->dma;
+ struct davinci_spi *dspi = (struct davinci_spi *)data;
- edma_stop(lch);
+ dspi->rcount = 0;
- if (status == DMA_COMPLETE) {
- if (lch == dma->rx_channel)
- dspi->rcount = 0;
- if (lch == dma->tx_channel)
- dspi->wcount = 0;
- }
+ if (!dspi->wcount && !dspi->rcount)
+ complete(&dspi->done);
+}
- if ((!dspi->wcount && !dspi->rcount) || (status != DMA_COMPLETE))
+static void davinci_spi_dma_tx_callback(void *data)
+{
+ struct davinci_spi *dspi = (struct davinci_spi *)data;
+
+ dspi->wcount = 0;
+
+ if (!dspi->wcount && !dspi->rcount)
complete(&dspi->done);
}
@@ -526,20 +524,20 @@ static void davinci_spi_dma_callback(unsigned lch, u16 status, void *data)
static int davinci_spi_bufs(struct spi_device *spi, struct spi_transfer *t)
{
struct davinci_spi *dspi;
- int data_type, ret;
+ int data_type, ret = -ENOMEM;
u32 tx_data, spidat1;
u32 errors = 0;
struct davinci_spi_config *spicfg;
struct davinci_spi_platform_data *pdata;
unsigned uninitialized_var(rx_buf_count);
- struct device *sdev;
+ void *dummy_buf = NULL;
+ struct scatterlist sg_rx, sg_tx;
dspi = spi_master_get_devdata(spi->master);
pdata = dspi->pdata;
spicfg = (struct davinci_spi_config *)spi->controller_data;
if (!spicfg)
spicfg = &davinci_spi_default_cfg;
- sdev = dspi->bitbang.master->dev.parent;
/* convert len to words based on bits_per_word */
data_type = dspi->bytes_per_word[spi->chip_select];
@@ -567,112 +565,83 @@ static int davinci_spi_bufs(struct spi_device *spi, struct spi_transfer *t)
spidat1 |= tx_data & 0xFFFF;
iowrite32(spidat1, dspi->base + SPIDAT1);
} else {
- struct davinci_spi_dma *dma;
- unsigned long tx_reg, rx_reg;
- struct edmacc_param param;
- void *rx_buf;
- int b, c;
-
- dma = &dspi->dma;
-
- tx_reg = (unsigned long)dspi->pbase + SPIDAT1;
- rx_reg = (unsigned long)dspi->pbase + SPIBUF;
-
- /*
- * Transmit DMA setup
- *
- * If there is transmit data, map the transmit buffer, set it
- * as the source of data and set the source B index to data
- * size. If there is no transmit data, set the transmit register
- * as the source of data, and set the source B index to zero.
- *
- * The destination is always the transmit register itself. And
- * the destination never increments.
- */
-
- if (t->tx_buf) {
- t->tx_dma = dma_map_single(&spi->dev, (void *)t->tx_buf,
- t->len, DMA_TO_DEVICE);
- if (dma_mapping_error(&spi->dev, t->tx_dma)) {
- dev_dbg(sdev, "Unable to DMA map %d bytes"
- "TX buffer\n", t->len);
- return -ENOMEM;
- }
- }
-
- /*
- * If number of words is greater than 65535, then we need
- * to configure a 3 dimension transfer. Use the BCNTRLD
- * feature to allow for transfers that aren't even multiples
- * of 65535 (or any other possible b size) by first transferring
- * the remainder amount then grabbing the next N blocks of
- * 65535 words.
- */
-
- c = dspi->wcount / (SZ_64K - 1); /* N 65535 Blocks */
- b = dspi->wcount - c * (SZ_64K - 1); /* Remainder */
- if (b)
- c++;
+ struct dma_slave_config dma_rx_conf = {
+ .direction = DMA_DEV_TO_MEM,
+ .src_addr = (unsigned long)dspi->pbase + SPIBUF,
+ .src_addr_width = data_type,
+ .src_maxburst = 1,
+ };
+ struct dma_slave_config dma_tx_conf = {
+ .direction = DMA_MEM_TO_DEV,
+ .dst_addr = (unsigned long)dspi->pbase + SPIDAT1,
+ .dst_addr_width = data_type,
+ .dst_maxburst = 1,
+ };
+ struct dma_async_tx_descriptor *rxdesc;
+ struct dma_async_tx_descriptor *txdesc;
+ void *buf;
+
+ dummy_buf = kzalloc(t->len, GFP_KERNEL);
+ if (!dummy_buf)
+ goto err_alloc_dummy_buf;
+
+ dmaengine_slave_config(dspi->dma_rx, &dma_rx_conf);
+ dmaengine_slave_config(dspi->dma_tx, &dma_tx_conf);
+
+ sg_init_table(&sg_rx, 1);
+ if (!t->rx_buf)
+ buf = dummy_buf;
else
- b = SZ_64K - 1;
-
- param.opt = TCINTEN | EDMA_TCC(dma->tx_channel);
- param.src = t->tx_buf ? t->tx_dma : tx_reg;
- param.a_b_cnt = b << 16 | data_type;
- param.dst = tx_reg;
- param.src_dst_bidx = t->tx_buf ? data_type : 0;
- param.link_bcntrld = 0xffffffff;
- param.src_dst_cidx = t->tx_buf ? data_type : 0;
- param.ccnt = c;
- edma_write_slot(dma->tx_channel, ¶m);
- edma_link(dma->tx_channel, dma->dummy_param_slot);
-
- /*
- * Receive DMA setup
- *
- * If there is receive buffer, use it to receive data. If there
- * is none provided, use a temporary receive buffer. Set the
- * destination B index to 0 so effectively only one byte is used
- * in the temporary buffer (address does not increment).
- *
- * The source of receive data is the receive data register. The
- * source address never increments.
- */
-
- if (t->rx_buf) {
- rx_buf = t->rx_buf;
- rx_buf_count = t->len;
- } else {
- rx_buf = dspi->rx_tmp_buf;
- rx_buf_count = sizeof(dspi->rx_tmp_buf);
+ buf = t->rx_buf;
+ t->rx_dma = dma_map_single(&spi->dev, buf,
+ t->len, DMA_FROM_DEVICE);
+ if (!t->rx_dma) {
+ ret = -EFAULT;
+ goto err_rx_map;
}
+ sg_dma_address(&sg_rx) = t->rx_dma;
+ sg_dma_len(&sg_rx) = t->len;
- t->rx_dma = dma_map_single(&spi->dev, rx_buf, rx_buf_count,
- DMA_FROM_DEVICE);
- if (dma_mapping_error(&spi->dev, t->rx_dma)) {
- dev_dbg(sdev, "Couldn't DMA map a %d bytes RX buffer\n",
- rx_buf_count);
- if (t->tx_buf)
- dma_unmap_single(&spi->dev, t->tx_dma, t->len,
- DMA_TO_DEVICE);
- return -ENOMEM;
+ sg_init_table(&sg_tx, 1);
+ if (!t->tx_buf)
+ buf = dummy_buf;
+ else
+ buf = (void *)t->tx_buf;
+ t->tx_dma = dma_map_single(&spi->dev, buf,
+ t->len, DMA_FROM_DEVICE);
+ if (!t->tx_dma) {
+ ret = -EFAULT;
+ goto err_tx_map;
}
-
- param.opt = TCINTEN | EDMA_TCC(dma->rx_channel);
- param.src = rx_reg;
- param.a_b_cnt = b << 16 | data_type;
- param.dst = t->rx_dma;
- param.src_dst_bidx = (t->rx_buf ? data_type : 0) << 16;
- param.link_bcntrld = 0xffffffff;
- param.src_dst_cidx = (t->rx_buf ? data_type : 0) << 16;
- param.ccnt = c;
- edma_write_slot(dma->rx_channel, ¶m);
+ sg_dma_address(&sg_tx) = t->tx_dma;
+ sg_dma_len(&sg_tx) = t->len;
+
+ rxdesc = dmaengine_prep_slave_sg(dspi->dma_rx,
+ &sg_rx, 1, DMA_DEV_TO_MEM,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!rxdesc)
+ goto err_desc;
+
+ txdesc = dmaengine_prep_slave_sg(dspi->dma_tx,
+ &sg_tx, 1, DMA_MEM_TO_DEV,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!txdesc)
+ goto err_desc;
+
+ rxdesc->callback = davinci_spi_dma_rx_callback;
+ rxdesc->callback_param = (void *)dspi;
+ txdesc->callback = davinci_spi_dma_tx_callback;
+ txdesc->callback_param = (void *)dspi;
if (pdata->cshold_bug)
iowrite16(spidat1 >> 16, dspi->base + SPIDAT1 + 2);
- edma_start(dma->rx_channel);
- edma_start(dma->tx_channel);
+ dmaengine_submit(rxdesc);
+ dmaengine_submit(txdesc);
+
+ dma_async_issue_pending(dspi->dma_rx);
+ dma_async_issue_pending(dspi->dma_tx);
+
set_io_bits(dspi->base + SPIINT, SPIINT_DMA_REQ_EN);
}
@@ -690,15 +659,13 @@ static int davinci_spi_bufs(struct spi_device *spi, struct spi_transfer *t)
clear_io_bits(dspi->base + SPIINT, SPIINT_MASKALL);
if (spicfg->io_type == SPI_IO_TYPE_DMA) {
-
- if (t->tx_buf)
- dma_unmap_single(&spi->dev, t->tx_dma, t->len,
- DMA_TO_DEVICE);
-
- dma_unmap_single(&spi->dev, t->rx_dma, rx_buf_count,
- DMA_FROM_DEVICE);
-
clear_io_bits(dspi->base + SPIINT, SPIINT_DMA_REQ_EN);
+
+ dma_unmap_single(&spi->dev, t->rx_dma,
+ t->len, DMA_FROM_DEVICE);
+ dma_unmap_single(&spi->dev, t->tx_dma,
+ t->len, DMA_TO_DEVICE);
+ kfree(dummy_buf);
}
clear_io_bits(dspi->base + SPIGCR1, SPIGCR1_SPIENA_MASK);
@@ -716,11 +683,20 @@ static int davinci_spi_bufs(struct spi_device *spi, struct spi_transfer *t)
}
if (dspi->rcount != 0 || dspi->wcount != 0) {
- dev_err(sdev, "SPI data transfer error\n");
+ dev_err(&spi->dev, "SPI data transfer error\n");
return -EIO;
}
return t->len;
+
+err_desc:
+ dma_unmap_single(&spi->dev, t->tx_dma, t->len, DMA_TO_DEVICE);
+err_tx_map:
+ dma_unmap_single(&spi->dev, t->rx_dma, t->len, DMA_FROM_DEVICE);
+err_rx_map:
+ kfree(dummy_buf);
+err_alloc_dummy_buf:
+ return ret;
}
/**
@@ -751,39 +727,33 @@ static irqreturn_t davinci_spi_irq(s32 irq, void *data)
static int davinci_spi_request_dma(struct davinci_spi *dspi)
{
+ dma_cap_mask_t mask;
+ struct device *sdev = dspi->bitbang.master->dev.parent;
int r;
- struct davinci_spi_dma *dma = &dspi->dma;
- r = edma_alloc_channel(dma->rx_channel, davinci_spi_dma_callback, dspi,
- dma->eventq);
- if (r < 0) {
- pr_err("Unable to request DMA channel for SPI RX\n");
- r = -EAGAIN;
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+
+ dspi->dma_rx = dma_request_channel(mask, edma_filter_fn,
+ &dspi->dma_rx_chnum);
+ if (!dspi->dma_rx) {
+ dev_err(sdev, "request RX DMA channel failed\n");
+ r = -ENODEV;
goto rx_dma_failed;
}
- r = edma_alloc_channel(dma->tx_channel, davinci_spi_dma_callback, dspi,
- dma->eventq);
- if (r < 0) {
- pr_err("Unable to request DMA channel for SPI TX\n");
- r = -EAGAIN;
+ dspi->dma_tx = dma_request_channel(mask, edma_filter_fn,
+ &dspi->dma_tx_chnum);
+ if (!dspi->dma_tx) {
+ dev_err(sdev, "request TX DMA channel failed\n");
+ r = -ENODEV;
goto tx_dma_failed;
}
- r = edma_alloc_slot(EDMA_CTLR(dma->tx_channel), EDMA_SLOT_ANY);
- if (r < 0) {
- pr_err("Unable to request SPI TX DMA param slot\n");
- r = -EAGAIN;
- goto param_failed;
- }
- dma->dummy_param_slot = r;
- edma_link(dma->dummy_param_slot, dma->dummy_param_slot);
-
return 0;
-param_failed:
- edma_free_channel(dma->tx_channel);
+
tx_dma_failed:
- edma_free_channel(dma->rx_channel);
+ dma_release_channel(dspi->dma_rx);
rx_dma_failed:
return r;
}
@@ -898,9 +868,8 @@ static int __devinit davinci_spi_probe(struct platform_device *pdev)
dspi->bitbang.txrx_bufs = davinci_spi_bufs;
if (dma_rx_chan != SPI_NO_RESOURCE &&
dma_tx_chan != SPI_NO_RESOURCE) {
- dspi->dma.rx_channel = dma_rx_chan;
- dspi->dma.tx_channel = dma_tx_chan;
- dspi->dma.eventq = pdata->dma_event_q;
+ dspi->dma_rx_chnum = dma_rx_chan;
+ dspi->dma_tx_chnum = dma_tx_chan;
ret = davinci_spi_request_dma(dspi);
if (ret)
@@ -955,9 +924,8 @@ static int __devinit davinci_spi_probe(struct platform_device *pdev)
return ret;
free_dma:
- edma_free_channel(dspi->dma.tx_channel);
- edma_free_channel(dspi->dma.rx_channel);
- edma_free_slot(dspi->dma.dummy_param_slot);
+ dma_release_channel(dspi->dma_rx);
+ dma_release_channel(dspi->dma_tx);
free_clk:
clk_disable(dspi->clk);
clk_put(dspi->clk);
--
1.7.9.5
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
next prev parent reply other threads:[~2012-08-23 1:09 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-23 1:09 [PATCH v3 0/3] DaVinci DMA engine conversion Matt Porter
[not found] ` <1345684176-21472-1-git-send-email-mporter-l0cyMroinI0@public.gmane.org>
2012-08-23 1:09 ` [PATCH v3 1/3] dmaengine: add TI EDMA DMA engine driver Matt Porter
2012-08-23 1:09 ` [PATCH v3 2/3] mmc: davinci_mmc: convert to DMA engine API Matt Porter
2012-08-23 1:09 ` Matt Porter [this message]
[not found] ` <1345684176-21472-4-git-send-email-mporter-l0cyMroinI0@public.gmane.org>
2012-08-30 14:16 ` [PATCH v3 3/3] spi: spi-davinci: " Sekhar Nori
2012-08-30 14:43 ` Matt Porter
2012-08-31 0:55 ` Vinod Koul
2012-08-31 16:02 ` Sekhar Nori
2012-08-31 16:31 ` Vinod Koul
2012-08-31 16:31 ` Sekhar Nori
2012-08-31 17:02 ` Vinod Koul
2012-09-01 1:02 ` Vinod Koul
2012-09-01 13:14 ` Matt Porter
2012-08-23 6:01 ` [PATCH v3 0/3] DaVinci DMA engine conversion Tom Rini
2012-08-27 15:33 ` Daniel Mack
2012-09-06 13:25 ` Daniel Mack
2012-09-10 20:20 ` Matt Porter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1345684176-21472-4-git-send-email-mporter@ti.com \
--to=mporter-l0cymroini0@public.gmane.org \
--cc=cjb-2X9k7bc8m7Mdnm+yROfE0A@public.gmane.org \
--cc=davinci-linux-open-source-VycZQUHpC/PFrsHnngEfi1aTQe2KTcn/@public.gmane.org \
--cc=grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-mmc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=nsekhar-l0cyMroinI0@public.gmane.org \
--cc=spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
--cc=vinod.koul-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).