[RFC PATCH v3 15/16] spi: omap2-mcspi: add generic DMA request support to the DT binding

[Matt Porter <mporter-l0cyMroinI0@public.gmane.org>]

The binding definition is based on the generic DMA request binding.

Signed-off-by: Matt Porter <mporter-l0cyMroinI0@public.gmane.org>
---
 Documentation/devicetree/bindings/spi/omap-spi.txt |   27 +++++++++++++++++++-
 1 file changed, 26 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/spi/omap-spi.txt b/Documentation/devicetree/bindings/spi/omap-spi.txt
index 81df374..11aff04 100644
--- a/Documentation/devicetree/bindings/spi/omap-spi.txt
+++ b/Documentation/devicetree/bindings/spi/omap-spi.txt
@@ -7,8 +7,18 @@ Required properties:
 - ti,spi-num-cs : Number of chipselect supported  by the instance.
 - ti,hwmods: Name of the hwmod associated to the McSPI
 
+Optional properties:
+- dmas: List of DMA controller phandle and DMA request ordered
+	pairs. One tx and one rx pair is required for each chip
+	select.
+- dma-names: List of DMA request names. These strings correspond
+	1:1 with the ordered pairs in dmas. The string naming is
+	to be "rxN" and "txN" for RX and TX requests,
+	respectively, where N equals the chip select number.
 
-Example:
+Examples:
+
+[hwmod populated DMA resources]
 
 mcspi1: mcspi@1 {
     #address-cells = <1>;
@@ -18,3 +28,18 @@ mcspi1: mcspi@1 {
     ti,spi-num-cs = <4>;
 };
 
+[generic DMA request binding]
+
+mcspi1: mcspi@1 {
+    #address-cells = <1>;
+    #size-cells = <0>;
+    compatible = "ti,omap4-mcspi";
+    ti,hwmods = "mcspi1";
+    ti,spi-num-cs = <2>;
+    dmas = <&edma 42
+	    &edma 43
+	    &edma 44
+	    &edma 45>;
+    dma-names = "tx0", "rx0", "tx1", "rx1";
+};
+
-- 
1.7.9.5


------------------------------------------------------------------------------
Everyone hates slow websites. So do we.
Make your web apps faster with AppDynamics
Download AppDynamics Lite for free today:
http://p.sf.net/sfu/appdyn_sfd2d_oct