linux-spi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Wenyou Yang <wenyou.yang-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: richard.genoud-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
	JM.Lin-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org,
	nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	wenyou.yang-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org,
	spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org,
	plagnioj-sclMFOaUSTBWk0Htik3J/w@public.gmane.org
Subject: [v2 PATCH 10/14] spi/atmel_spi: correct 16 bits transfers using PIO
Date: Tue,  4 Dec 2012 15:53:56 +0800	[thread overview]
Message-ID: <1354607640-13229-11-git-send-email-wenyou.yang@atmel.com> (raw)
In-Reply-To: <1354607640-13229-1-git-send-email-wenyou.yang-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>

From: Richard Genoud <richard.genoud-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

Signed-off-by: Richard Genoud <richard.genoud-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org
Cc: spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
---
 drivers/spi/spi-atmel.c |   46 +++++++++++++++++++++++++++++++++++++---------
 1 file changed, 37 insertions(+), 9 deletions(-)

diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c
index 7f624b6..9616fab 100644
--- a/drivers/spi/spi-atmel.c
+++ b/drivers/spi/spi-atmel.c
@@ -573,13 +573,17 @@ static void atmel_spi_next_xfer_pio(struct spi_master *master,
 	}
 
 	if (xfer->tx_buf)
-		spi_writel(as, TDR, *(u8 *)(xfer->tx_buf));
+		if (xfer->bits_per_word > 8)
+			spi_writel(as, TDR, *(u16 *)(xfer->tx_buf));
+		else
+			spi_writel(as, TDR, *(u8 *)(xfer->tx_buf));
 	else
 		spi_writel(as, TDR, 0);
 
 	dev_dbg(master->dev.parent,
-		"  start pio xfer %p: len %u tx %p rx %p\n",
-		xfer, xfer->len, xfer->tx_buf, xfer->rx_buf);
+		"  start pio xfer %p: len %u tx %p rx %p bitpw %d\n",
+		xfer, xfer->len, xfer->tx_buf, xfer->rx_buf,
+		xfer->bits_per_word);
 
 	/* Enable relevant interrupts */
 	spi_writel(as, IER, SPI_BIT(RDRF) | SPI_BIT(OVRES));
@@ -997,21 +1001,39 @@ atmel_spi_pump_pio_data(struct atmel_spi *as, struct spi_transfer *xfer)
 {
 	u8		*txp;
 	u8		*rxp;
+	u16		*txp16;
+	u16		*rxp16;
 	unsigned long	xfer_pos = xfer->len - as->current_remaining_bytes;
 
 	if (xfer->rx_buf) {
-		rxp = ((u8 *)xfer->rx_buf) + xfer_pos;
-		*rxp = spi_readl(as, RDR);
+		if (xfer->bits_per_word > 8) {
+			rxp16 = (u16 *)(((u8 *)xfer->rx_buf) + xfer_pos);
+			*rxp16 = spi_readl(as, RDR);
+		} else {
+			rxp = ((u8 *)xfer->rx_buf) + xfer_pos;
+			*rxp = spi_readl(as, RDR);
+		}
 	} else {
 		spi_readl(as, RDR);
 	}
-
-	as->current_remaining_bytes--;
+	if (xfer->bits_per_word > 8) {
+		as->current_remaining_bytes -= 2;
+		if (as->current_remaining_bytes < 0)
+			as->current_remaining_bytes = 0;
+	} else {
+		as->current_remaining_bytes--;
+	}
 
 	if (as->current_remaining_bytes) {
 		if (xfer->tx_buf) {
-			txp = ((u8 *)xfer->tx_buf) + xfer_pos + 1;
-			spi_writel(as, TDR, *txp);
+			if (xfer->bits_per_word > 8) {
+				txp16 = (u16 *)(((u8 *)xfer->tx_buf)
+							+ xfer_pos + 2);
+				spi_writel(as, TDR, *txp16);
+			} else {
+				txp = ((u8 *)xfer->tx_buf) + xfer_pos + 1;
+				spi_writel(as, TDR, *txp);
+			}
 		} else {
 			spi_writel(as, TDR, 0);
 		}
@@ -1431,6 +1453,12 @@ static int atmel_spi_transfer(struct spi_device *spi, struct spi_message *msg)
 				return -ENOPROTOOPT;
 			}
 		}
+		if (xfer->bits_per_word > 8) {
+			if (xfer->len % 2) {
+				dev_dbg(&spi->dev, "buffer len should be 16 bits aligned\n");
+				return -EINVAL;
+			}
+		}
 
 		/* FIXME implement these protocol options!! */
 		if (xfer->speed_hz) {
-- 
1.7.9.5


------------------------------------------------------------------------------
LogMeIn Rescue: Anywhere, Anytime Remote support for IT. Free Trial
Remotely access PCs and mobile devices and provide instant support
Improve your efficiency, and focus on delivering more value-add services
Discover what IT Professionals Know. Rescue delivers
http://p.sf.net/sfu/logmein_12329d2d

  parent reply	other threads:[~2012-12-04  7:53 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1354607640-13229-1-git-send-email-wenyou.yang@atmel.com>
     [not found] ` <1354607640-13229-1-git-send-email-wenyou.yang-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
2012-12-04  7:53   ` [v2 PATCH 02/14] of_spi: add generic binding support to specify cs gpio Wenyou Yang
     [not found]     ` <1354607640-13229-3-git-send-email-wenyou.yang-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
2012-12-05 23:28       ` Grant Likely
2012-12-04  7:53   ` [v2 PATCH 03/14] spi/atmel_spi: add physical base address Wenyou Yang
2012-12-04  7:53   ` [v2 PATCH 04/14] spi/atmel_spi: call unmapping on transfers buffers Wenyou Yang
2012-12-04  7:53   ` [v2 PATCH 05/14] spi/atmel_spi: status information passed through controller data Wenyou Yang
2012-12-04  7:53   ` [v2 PATCH 06/14] spi/atmel_spi: add flag to controller data for lock operations Wenyou Yang
2012-12-04  7:53   ` [v2 PATCH 07/14] spi/atmel_spi: add DT support Wenyou Yang
     [not found]     ` <1354607640-13229-8-git-send-email-wenyou.yang-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
2012-12-07  6:58       ` Jean-Christophe PLAGNIOL-VILLARD
2012-12-04  7:53   ` [v2 PATCH 08/14] spi/atmel_spi: add dmaengine support Wenyou Yang
2012-12-04  7:53   ` [v2 PATCH 09/14] spi/atmel_spi: Fix spi-atmel driver to adapt to slave_config changes Wenyou Yang
2012-12-04  7:53   ` Wenyou Yang [this message]
2012-12-04  7:53   ` [v2 PATCH 11/14] spi/atmel_spi: correct 16 bits transfer with DMA Wenyou Yang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1354607640-13229-11-git-send-email-wenyou.yang@atmel.com \
    --to=wenyou.yang-aife0yeh4naavxtiumwx3w@public.gmane.org \
    --cc=JM.Lin-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org \
    --cc=plagnioj-sclMFOaUSTBWk0Htik3J/w@public.gmane.org \
    --cc=richard.genoud-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).