[PATCH 2/2] spi: tegra: remove checks for valid speed

[Laxman Dewangan <ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>]

SPI core make sure that all transfer has proper speed set
before calling low level spi transfer. Hence, it is not
require to have check in spi driver.

Remove the check for speed validity from transfer and use it directly.

Signed-off-by: Laxman Dewangan <ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
 drivers/spi/spi-tegra20-sflash.c |   14 +++++++++++---
 drivers/spi/spi-tegra20-slink.c  |    6 +++---
 2 files changed, 14 insertions(+), 6 deletions(-)

diff --git a/drivers/spi/spi-tegra20-sflash.c b/drivers/spi/spi-tegra20-sflash.c
index 448a8cc..9a42c15 100644
--- a/drivers/spi/spi-tegra20-sflash.c
+++ b/drivers/spi/spi-tegra20-sflash.c
@@ -269,9 +269,7 @@ static int tegra_sflash_start_transfer_one(struct spi_device *spi,
 	u32 speed;
 	unsigned long command;
 
-	speed = t->speed_hz ? t->speed_hz : spi->max_speed_hz;
-	if (!speed)
-		speed = tsd->spi_max_frequency;
+	speed = t->speed_hz;
 	if (speed != tsd->cur_speed) {
 		clk_set_rate(tsd->clk, speed);
 		tsd->cur_speed = speed;
@@ -319,6 +317,15 @@ static int tegra_sflash_start_transfer_one(struct spi_device *spi,
 	return  tegra_sflash_start_cpu_based_transfer(tsd, t);
 }
 
+static int tegra_sflash_setup(struct spi_device *spi)
+{
+	struct tegra_sflash_data *tsd = spi_master_get_devdata(spi->master);
+
+	/* Set speed to the spi max fequency if spi device has not set */
+	spi->max_speed_hz = spi->max_speed_hz ? : tsd->spi_max_frequency;
+	return 0;
+}
+
 static int tegra_sflash_transfer_one_message(struct spi_master *master,
 			struct spi_message *msg)
 {
@@ -492,6 +499,7 @@ static int tegra_sflash_probe(struct platform_device *pdev)
 
 	/* the spi->mode bits understood by this driver: */
 	master->mode_bits = SPI_CPOL | SPI_CPHA;
+	master->setup = tegra_sflash_setup;
 	master->transfer_one_message = tegra_sflash_transfer_one_message;
 	master->num_chipselect = MAX_CHIP_SELECT;
 	master->bus_num = -1;
diff --git a/drivers/spi/spi-tegra20-slink.c b/drivers/spi/spi-tegra20-slink.c
index 651167f..29039f1 100644
--- a/drivers/spi/spi-tegra20-slink.c
+++ b/drivers/spi/spi-tegra20-slink.c
@@ -728,9 +728,7 @@ static int tegra_slink_start_transfer_one(struct spi_device *spi,
 	unsigned long command2;
 
 	bits_per_word = t->bits_per_word;
-	speed = t->speed_hz ? t->speed_hz : spi->max_speed_hz;
-	if (!speed)
-		speed = tspi->spi_max_frequency;
+	speed = t->speed_hz;
 	if (speed != tspi->cur_speed) {
 		clk_set_rate(tspi->clk, speed * 4);
 		tspi->cur_speed = speed;
@@ -841,6 +839,8 @@ static int tegra_slink_setup(struct spi_device *spi)
 
 	BUG_ON(spi->chip_select >= MAX_CHIP_SELECT);
 
+	/* Set speed to the spi max fequency if spi device has not set */
+	spi->max_speed_hz = spi->max_speed_hz ? : tspi->spi_max_frequency;
 	ret = pm_runtime_get_sync(tspi->dev);
 	if (ret < 0) {
 		dev_err(tspi->dev, "pm runtime failed, e = %d\n", ret);
-- 
1.7.1.1


------------------------------------------------------------------------------
Master HTML5, CSS3, ASP.NET, MVC, AJAX, Knockout.js, Web API and
much more. Get web development skills now with LearnDevNow -
350+ hours of step-by-step video tutorials by Microsoft MVPs and experts.
SALE $99.99 this month only -- learn more at:
http://p.sf.net/sfu/learnmore_122812