[PATCH v3 2/7] spi: spi-fsl-spi: Make sure in spi_fsl_setup that chipselect becomes inactive

[Andreas Larsson <andreas-FkzTOoA/JUlBDgjK7y7TUQ@public.gmane.org>]

This is needed for a device in SPI_CS_HIGH mode that otherwise could start out
active for the first transaction.

Acked-by: Anton Vorontsov <anton-9xeibp6oKSgdnm+yROfE0A@public.gmane.org>
Signed-off-by: Andreas Larsson <andreas-FkzTOoA/JUlBDgjK7y7TUQ@public.gmane.org>
---
 drivers/spi/spi-fsl-spi.c |    4 ++++
 1 files changed, 4 insertions(+), 0 deletions(-)

diff --git a/drivers/spi/spi-fsl-spi.c b/drivers/spi/spi-fsl-spi.c
index cf1cffb..527ac35 100644
--- a/drivers/spi/spi-fsl-spi.c
+++ b/drivers/spi/spi-fsl-spi.c
@@ -387,6 +387,10 @@ static int fsl_spi_setup(struct spi_device *spi)
 		cs->hw_mode = hw_mode; /* Restore settings */
 		return retval;
 	}
+
+	/* Initialize chipselect - might be active for SPI_CS_HIGH mode */
+	fsl_spi_chipselect(spi, BITBANG_CS_INACTIVE);
+
 	return 0;
 }
 
-- 
1.7.0.4


------------------------------------------------------------------------------
Free Next-Gen Firewall Hardware Offer
Buy your Sophos next-gen firewall before the end March 2013 
and get the hardware for free! Learn more.
http://p.sf.net/sfu/sophos-d2d-feb