From: Anatolij Gustschin <agust-ynQEQJNshbs@public.gmane.org>
To: spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org,
Mark Brown
<broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
Cc: Anatolij Gustschin <agust-ynQEQJNshbs@public.gmane.org>
Subject: [PATCH v2 RESEND] spi: spi-mpc512x-psc: add support for gpio chip selects
Date: Mon, 1 Apr 2013 17:29:21 +0200 [thread overview]
Message-ID: <1364830161-15016-1-git-send-email-agust@denx.de> (raw)
In-Reply-To: <1363044215-24061-1-git-send-email-agust-ynQEQJNshbs@public.gmane.org>
Currently the driver only uses one internal chip select.
Add support for gpio chip selects configured by cs-gpios
DT binding.
Signed-off-by: Anatolij Gustschin <agust-ynQEQJNshbs@public.gmane.org>
---
v2 resend:
- no changes, resend to Mark
v2:
- do not parse GPIO chip selects manually
drivers/spi/spi-mpc512x-psc.c | 31 +++++++++++++++++++++++++------
1 files changed, 25 insertions(+), 6 deletions(-)
diff --git a/drivers/spi/spi-mpc512x-psc.c b/drivers/spi/spi-mpc512x-psc.c
index 3e490ee..da60f26 100644
--- a/drivers/spi/spi-mpc512x-psc.c
+++ b/drivers/spi/spi-mpc512x-psc.c
@@ -28,6 +28,7 @@
#include <linux/clk.h>
#include <linux/spi/spi.h>
#include <linux/fsl_devices.h>
+#include <linux/gpio.h>
#include <asm/mpc52xx_psc.h>
struct mpc512x_psc_spi {
@@ -113,7 +114,7 @@ static void mpc512x_psc_spi_activate_cs(struct spi_device *spi)
out_be32(&psc->ccr, ccr);
mps->bits_per_word = cs->bits_per_word;
- if (mps->cs_control)
+ if (mps->cs_control && gpio_is_valid(spi->cs_gpio))
mps->cs_control(spi, (spi->mode & SPI_CS_HIGH) ? 1 : 0);
}
@@ -121,7 +122,7 @@ static void mpc512x_psc_spi_deactivate_cs(struct spi_device *spi)
{
struct mpc512x_psc_spi *mps = spi_master_get_devdata(spi->master);
- if (mps->cs_control)
+ if (mps->cs_control && gpio_is_valid(spi->cs_gpio))
mps->cs_control(spi, (spi->mode & SPI_CS_HIGH) ? 0 : 1);
}
@@ -278,6 +279,7 @@ static int mpc512x_psc_spi_setup(struct spi_device *spi)
struct mpc512x_psc_spi *mps = spi_master_get_devdata(spi->master);
struct mpc512x_psc_spi_cs *cs = spi->controller_state;
unsigned long flags;
+ int ret;
if (spi->bits_per_word % 8)
return -EINVAL;
@@ -286,6 +288,19 @@ static int mpc512x_psc_spi_setup(struct spi_device *spi)
cs = kzalloc(sizeof *cs, GFP_KERNEL);
if (!cs)
return -ENOMEM;
+
+ if (gpio_is_valid(spi->cs_gpio)) {
+ ret = gpio_request(spi->cs_gpio, dev_name(&spi->dev));
+ if (ret) {
+ dev_err(&spi->dev, "can't get CS gpio: %d\n",
+ ret);
+ kfree(cs);
+ return ret;
+ }
+ gpio_direction_output(spi->cs_gpio,
+ spi->mode & SPI_CS_HIGH ? 0 : 1);
+ }
+
spi->controller_state = cs;
}
@@ -319,6 +334,8 @@ static int mpc512x_psc_spi_transfer(struct spi_device *spi,
static void mpc512x_psc_spi_cleanup(struct spi_device *spi)
{
+ if (gpio_is_valid(spi->cs_gpio))
+ gpio_free(spi->cs_gpio);
kfree(spi->controller_state);
}
@@ -405,6 +422,11 @@ static irqreturn_t mpc512x_psc_spi_isr(int irq, void *dev_id)
return IRQ_NONE;
}
+static void mpc512x_spi_cs_control(struct spi_device *spi, bool onoff)
+{
+ gpio_set_value(spi->cs_gpio, onoff);
+}
+
/* bus_num is used only for the case dev->platform_data == NULL */
static int mpc512x_psc_spi_do_probe(struct device *dev, u32 regaddr,
u32 size, unsigned int irq,
@@ -425,12 +447,9 @@ static int mpc512x_psc_spi_do_probe(struct device *dev, u32 regaddr,
mps->irq = irq;
if (pdata == NULL) {
- dev_err(dev, "probe called without platform data, no "
- "cs_control function will be called\n");
- mps->cs_control = NULL;
+ mps->cs_control = mpc512x_spi_cs_control;
mps->sysclk = 0;
master->bus_num = bus_num;
- master->num_chipselect = 255;
} else {
mps->cs_control = pdata->cs_control;
mps->sysclk = pdata->sysclk;
--
1.7.5.4
------------------------------------------------------------------------------
Own the Future-Intel® Level Up Game Demo Contest 2013
Rise to greatness in Intel's independent game demo contest.
Compete for recognition, cash, and the chance to get your game
on Steam. $5K grand prize plus 10 genre and skill prizes.
Submit your demo by 6/6/13. http://p.sf.net/sfu/intel_levelupd2d
next prev parent reply other threads:[~2013-04-01 15:29 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-14 20:27 [PATCH 1/2] spi: spi-mpc512x-psc: init mode bits supported by the driver Anatolij Gustschin
[not found] ` <1358195221-18488-1-git-send-email-agust-ynQEQJNshbs@public.gmane.org>
2013-01-14 20:27 ` [PATCH 2/2] spi: spi-mpc512x-psc: add support for gpio chip selects Anatolij Gustschin
[not found] ` <1358195221-18488-2-git-send-email-agust-ynQEQJNshbs@public.gmane.org>
2013-02-05 14:18 ` Grant Likely
2013-03-11 22:45 ` Anatolij Gustschin
2013-03-11 23:23 ` [PATCH v2] " Anatolij Gustschin
[not found] ` <1363044215-24061-1-git-send-email-agust-ynQEQJNshbs@public.gmane.org>
2013-04-01 15:29 ` Anatolij Gustschin [this message]
[not found] ` <20130409165322.GS9243@opensource.wolfsonmicro.com>
[not found] ` <20130409165322.GS9243-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
2013-04-09 17:04 ` [PATCH v2 RESEND] " Anatolij Gustschin
2013-02-05 14:16 ` [PATCH 1/2] spi: spi-mpc512x-psc: init mode bits supported by the driver Grant Likely
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1364830161-15016-1-git-send-email-agust@denx.de \
--to=agust-ynqeqjnshbs@public.gmane.org \
--cc=broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org \
--cc=spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).