From: Wenyou Yang <wenyou.yang-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
To: <linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>
Cc: linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org,
richard.genoud-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
JM.Lin-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org,
broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org,
nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
wenyou.yang-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org,
spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org,
plagnioj-sclMFOaUSTBWk0Htik3J/w@public.gmane.org
Subject: [PATCH v8 6/8] ARM: dts: add spi nodes for atmel SoC
Date: Wed, 3 Apr 2013 14:02:18 +0800 [thread overview]
Message-ID: <1364968938-24198-1-git-send-email-wenyou.yang@atmel.com> (raw)
In-Reply-To: <1364968581-23700-1-git-send-email-wenyou.yang-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
From: Richard Genoud <richard.genoud-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Signed-off-by: Richard Genoud <richard.genoud-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
[wenyou.yang-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org: add spi nodes for sam9260, sam9263, sam9g45 and sam9n12]
[wenyou.yang-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org: remove spi property "cs-gpios" to the board dts files]
[wenyou.yang-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org: submit the patch]
Signed-off-by: Wenyou Yang <wenyou.yang-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
Cc: linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
---
arch/arm/boot/dts/at91sam9260.dtsi | 18 ++++++++++++++++++
arch/arm/boot/dts/at91sam9263.dtsi | 18 ++++++++++++++++++
arch/arm/boot/dts/at91sam9g45.dtsi | 18 ++++++++++++++++++
arch/arm/boot/dts/at91sam9n12.dtsi | 18 ++++++++++++++++++
arch/arm/boot/dts/at91sam9x5.dtsi | 18 ++++++++++++++++++
5 files changed, 90 insertions(+)
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index cb7bcc5..6e31dc8 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -471,6 +471,24 @@
status = "disabled";
};
+ spi0: spi@fffc8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,at91rm9200-spi";
+ reg = <0xfffc8000 0x200>;
+ interrupts = <12 4 3>;
+ status = "disabled";
+ };
+
+ spi1: spi@fffcc000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,at91rm9200-spi";
+ reg = <0xfffcc000 0x200>;
+ interrupts = <13 4 3>;
+ status = "disabled";
+ };
+
adc0: adc@fffe0000 {
compatible = "atmel,at91sam9260-adc";
reg = <0xfffe0000 0x100>;
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index 271d4de..6c6d9ae 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -462,6 +462,24 @@
reg = <0xfffffd40 0x10>;
status = "disabled";
};
+
+ spi0: spi@fffa4000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,at91rm9200-spi";
+ reg = <0xfffa4000 0x200>;
+ interrupts = <14 4 3>;
+ status = "disabled";
+ };
+
+ spi1: spi@fffa8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,at91rm9200-spi";
+ reg = <0xfffa8000 0x200>;
+ interrupts = <15 4 3>;
+ status = "disabled";
+ };
};
nand0: nand@40000000 {
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 6b1d4ca..e085b8a 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -531,6 +531,24 @@
reg = <0xfffffd40 0x10>;
status = "disabled";
};
+
+ spi0: spi@fffa4000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,at91rm9200-spi";
+ reg = <0xfffa4000 0x200>;
+ interrupts = <14 4 3>;
+ status = "disabled";
+ };
+
+ spi1: spi@fffa8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,at91rm9200-spi";
+ reg = <0xfffa8000 0x200>;
+ interrupts = <15 4 3>;
+ status = "disabled";
+ };
};
nand0: nand@40000000 {
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index 7750f98..f3f87ef3 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -373,6 +373,24 @@
#size-cells = <0>;
status = "disabled";
};
+
+ spi0: spi@f0000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,at91rm9200-spi";
+ reg = <0xf0000000 0x100>;
+ interrupts = <13 4 3>;
+ status = "disabled";
+ };
+
+ spi1: spi@f0004000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,at91rm9200-spi";
+ reg = <0xf0004000 0x100>;
+ interrupts = <14 4 3>;
+ status = "disabled";
+ };
};
nand0: nand@40000000 {
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index a98c0d5..77ce2e1 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -529,6 +529,24 @@
trigger-value = <0x6>;
};
};
+
+ spi0: spi@f0000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,at91rm9200-spi";
+ reg = <0xf0000000 0x100>;
+ interrupts = <13 4 3>;
+ status = "disabled";
+ };
+
+ spi1: spi@f0004000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,at91rm9200-spi";
+ reg = <0xf0004000 0x100>;
+ interrupts = <14 4 3>;
+ status = "disabled";
+ };
};
nand0: nand@40000000 {
--
1.7.9.5
------------------------------------------------------------------------------
Minimize network downtime and maximize team effectiveness.
Reduce network management and security costs.Learn how to hire
the most talented Cisco Certified professionals. Visit the
Employer Resources Portal
http://www.cisco.com/web/learning/employer_resources/index.html
next prev parent reply other threads:[~2013-04-03 6:02 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-03 5:56 [PATCH v8 0/8] spi/spi-atmel: add dmaengine support for atmel spi controller and to test the device tree support Wenyou Yang
2013-04-03 5:57 ` [PATCH v8 1/8] spi/spi-atmel: add physical base address Wenyou Yang
[not found] ` <1364968662-23763-1-git-send-email-wenyou.yang-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
2013-04-03 9:42 ` Richard GENOUD
2013-04-23 18:30 ` Mark Brown
[not found] ` <1364968581-23700-1-git-send-email-wenyou.yang-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
2013-04-03 5:58 ` [PATCH v8 2/8] spi/spi-atmel: add flag to controller data for lock operations Wenyou Yang
[not found] ` <1364968716-23848-1-git-send-email-wenyou.yang-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
2013-04-03 9:44 ` Richard GENOUD
2013-04-23 18:30 ` Mark Brown
2013-04-03 5:59 ` [PATCH v8 3/8] spi/spi-atmel: add dmaengine support Wenyou Yang
[not found] ` <1364968759-24036-1-git-send-email-wenyou.yang-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
2013-04-03 10:23 ` Richard GENOUD
2013-04-23 18:33 ` Mark Brown
[not found] ` <20130423183301.GX5019-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
2013-04-24 9:27 ` Richard Genoud
2013-04-24 10:00 ` Mark Brown
2013-04-03 6:00 ` [PATCH v8 4/8] spi/spi-atmel: BUG: fix doesn' support 16 bits transfers using PIO Wenyou Yang
2013-04-24 10:01 ` Mark Brown
2013-04-03 6:02 ` Wenyou Yang [this message]
2013-04-24 10:03 ` [PATCH v8 6/8] ARM: dts: add spi nodes for atmel SoC Mark Brown
2013-04-03 6:03 ` [PATCH v8 7/8] ARM: dts: add spi nodes for the atmel boards Wenyou Yang
2013-04-24 10:04 ` Mark Brown
2013-04-03 6:01 ` [PATCH v8 5/8] ARM: at91: add clocks for spi dt entries Wenyou Yang
2013-04-24 10:02 ` Mark Brown
2013-04-03 6:03 ` [PATCH v8 8/8] ARM: dts: add pinctrl property for spi node for atmel SoC Wenyou Yang
[not found] ` <1364969032-24281-1-git-send-email-wenyou.yang-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
2013-04-03 10:35 ` Richard GENOUD
2013-04-24 10:05 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1364968938-24198-1-git-send-email-wenyou.yang@atmel.com \
--to=wenyou.yang-aife0yeh4naavxtiumwx3w@public.gmane.org \
--cc=JM.Lin-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org \
--cc=broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org \
--cc=nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org \
--cc=plagnioj-sclMFOaUSTBWk0Htik3J/w@public.gmane.org \
--cc=richard.genoud-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).