From: Joel A Fernandes <joelagnel-l0cyMroinI0@public.gmane.org>
To: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>,
Sekhar Nori <nsekhar-l0cyMroinI0@public.gmane.org>,
Matt Porter <matt-agtwNxEcTQJWk0Htik3J/w@public.gmane.org>,
Grant Likely
<grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>,
Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>,
Vinod Koul <vinod.koul-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>,
Mark Brown <broonie-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
Benoit Cousson <b-cousson-l0cyMroinI0@public.gmane.org>,
Russell King <linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>,
Rob Landley <rob-VoJi6FS/r0vR7s880joybQ@public.gmane.org>,
Andrew Morton
<akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org>,
Jason Kridner <jkridner-hcmAuCOw+vXj4SYmN/TMmA@public.gmane.org>,
Koen Kooi <koen-hcmAuCOw+vXj4SYmN/TMmA@public.gmane.org>,
Balaji TK <balajitk-l0cyMroinI0@public.gmane.org>,
Chris Ball <cjb-2X9k7bc8m7Mdnm+yROfE0A@public.gmane.org>
Cc: Linux DaVinci Kernel List
<davinci-linux-open-source-VycZQUHpC/PFrsHnngEfi1aTQe2KTcn/@public.gmane.org>,
Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>,
Linux Documentation List
<linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
Devicetree Discuss
<devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org>,
Linux MMC List
<linux-mmc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
Linux Kernel Mailing List
<linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
Linux SPI Devel List
<spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org>,
Linux OMAP List
<linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
Linux ARM Kernel List
<linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>
Subject: [PATCH 1/5] MMC: omap_hsmmc: Add reg_offset to DT bindings
Date: Tue, 25 Jun 2013 20:24:09 -0500 [thread overview]
Message-ID: <1372209849-6580-1-git-send-email-joelagnel@ti.com> (raw)
From: Joel A Fernandes <agnel.joel-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Some omap_hsmmc's need to start from a particular offset but
otherwise are same and can be reused. Let the DT tell us about
the HW difference, check for the reg-offset property and use
the same in the driver.
Signed-off-by: Joel A Fernandes <agnel.joel-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
drivers/mmc/host/omap_hsmmc.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 5af62c6..aae0994 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -1717,6 +1717,7 @@ static struct omap_mmc_platform_data *of_get_hsmmc_pdata(struct device *dev)
struct omap_mmc_platform_data *pdata;
struct device_node *np = dev->of_node;
u32 bus_width, max_freq;
+ u32 reg_offset;
int cd_gpio, wp_gpio;
cd_gpio = of_get_named_gpio(np, "cd-gpios", 0);
@@ -1755,6 +1756,9 @@ static struct omap_mmc_platform_data *of_get_hsmmc_pdata(struct device *dev)
if (of_find_property(np, "ti,needs-special-hs-handling", NULL))
pdata->slots[0].features |= HSMMC_HAS_HSPE_SUPPORT;
+ if (!of_property_read_u32(np, "reg-offset", ®_offset))
+ pdata->reg_offset = reg_offset;
+
return pdata;
}
#else
@@ -1785,7 +1789,8 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
if (IS_ERR(pdata))
return PTR_ERR(pdata);
- if (match->data) {
+ /* Provide reg_offset from match->data unless specified in DT */
+ if (match->data && !pdata->reg_offset) {
const u16 *offsetp = match->data;
pdata->reg_offset = *offsetp;
}
--
1.7.9.5
reply other threads:[~2013-06-26 1:24 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1372209849-6580-1-git-send-email-joelagnel@ti.com \
--to=joelagnel-l0cymroini0@public.gmane.org \
--cc=akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org \
--cc=arnd-r2nGTMty4D4@public.gmane.org \
--cc=b-cousson-l0cyMroinI0@public.gmane.org \
--cc=balajitk-l0cyMroinI0@public.gmane.org \
--cc=broonie-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=cjb-2X9k7bc8m7Mdnm+yROfE0A@public.gmane.org \
--cc=davinci-linux-open-source-VycZQUHpC/PFrsHnngEfi1aTQe2KTcn/@public.gmane.org \
--cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
--cc=grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org \
--cc=jkridner-hcmAuCOw+vXj4SYmN/TMmA@public.gmane.org \
--cc=koen-hcmAuCOw+vXj4SYmN/TMmA@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org \
--cc=linux-mmc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=matt-agtwNxEcTQJWk0Htik3J/w@public.gmane.org \
--cc=nsekhar-l0cyMroinI0@public.gmane.org \
--cc=rob-VoJi6FS/r0vR7s880joybQ@public.gmane.org \
--cc=rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org \
--cc=spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
--cc=tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org \
--cc=vinod.koul-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).