From: Joel A Fernandes <joelagnel-l0cyMroinI0@public.gmane.org>
To: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>,
Sekhar Nori <nsekhar-l0cyMroinI0@public.gmane.org>,
Matt Porter <matt-agtwNxEcTQJWk0Htik3J/w@public.gmane.org>,
Grant Likely
<grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>,
Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>,
Vinod Koul <vinod.koul-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>,
Mark Brown <broonie-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
Benoit Cousson <b-cousson-l0cyMroinI0@public.gmane.org>,
Russell King <linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>,
Balaji TK <balajitk-l0cyMroinI0@public.gmane.org>,
Chris Ball <cjb-2X9k7bc8m7Mdnm+yROfE0A@public.gmane.org>
Cc: Linux DaVinci Kernel List
<davinci-linux-open-source-VycZQUHpC/PFrsHnngEfi1aTQe2KTcn/@public.gmane.org>,
Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>,
Linux Documentation List
<linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
Devicetree Discuss
<devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org>,
Linux MMC List
<linux-mmc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
Linux Kernel Mailing List
<linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
Linux SPI Devel List
<spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org>,
Linux OMAP List
<linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
Linux ARM Kernel List
<linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>
Subject: [PATCH 2/2] DMA: EDMA: Add comments for A-sync case calculations
Date: Tue, 25 Jun 2013 20:32:04 -0500 [thread overview]
Message-ID: <1372210324-7181-1-git-send-email-joelagnel@ti.com> (raw)
From: Joel A Fernandes <agnel.joel-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
A-sync case in EDMA driver is tricky and not so obvious.
Document the reasons for the calculations and the scenarious
they are used.
Signed-off-by: Joel A Fernandes <agnel.joel-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
drivers/dma/edma.c | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/drivers/dma/edma.c b/drivers/dma/edma.c
index e008ed2..a1d9f3785 100644
--- a/drivers/dma/edma.c
+++ b/drivers/dma/edma.c
@@ -284,8 +284,24 @@ static struct dma_async_tx_descriptor *edma_prep_slave_sg(
*/
if (burst == 1) {
edesc->absync = false;
+ /*
+ * For the A-sync case, bcnt and ccnt are the remainder
+ * and quotient respectively of the division of:
+ * (sg_dma_len(sg) / acnt) by (SZ_64K -1). This is so
+ * that in case bcnt over flows, we have ccnt to use.
+ * Note: In A-sync tranfer only, bcntrld is used, but it
+ * only applies for sg_dma_len(sg) >= SZ_64K.
+ * In this case, the best way adopted is- bccnt for the
+ * first frame will be the remainder below. Then for
+ * every successive frame, bcnt will be SZ_64K-1. This
+ * is assured as bcntrld = 0xffff in end of function.
+ */
ccnt = sg_dma_len(sg) / acnt / (SZ_64K - 1);
bcnt = sg_dma_len(sg) / acnt - ccnt * (SZ_64K - 1);
+ /*
+ * If bcnt is non-zero, we have a remainder and hence an
+ * extra frame to transfer, so increment ccnt.
+ */
if (bcnt)
ccnt++;
else
@@ -343,6 +359,12 @@ static struct dma_async_tx_descriptor *edma_prep_slave_sg(
edesc->pset[i].a_b_cnt = bcnt << 16 | acnt;
edesc->pset[i].ccnt = ccnt;
+ /*
+ * Only time when (bcntrld) auto reload is required is for
+ * A-sync case, and in this case, a requirement of reload value
+ * of SZ_64K-1 only is assured. 'link' is initially set to NULL
+ * and then later will be populated by edma_execute.
+ */
edesc->pset[i].link_bcntrld = 0xffffffff;
}
--
1.7.9.5
reply other threads:[~2013-06-26 1:32 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1372210324-7181-1-git-send-email-joelagnel@ti.com \
--to=joelagnel-l0cymroini0@public.gmane.org \
--cc=arnd-r2nGTMty4D4@public.gmane.org \
--cc=b-cousson-l0cyMroinI0@public.gmane.org \
--cc=balajitk-l0cyMroinI0@public.gmane.org \
--cc=broonie-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=cjb-2X9k7bc8m7Mdnm+yROfE0A@public.gmane.org \
--cc=davinci-linux-open-source-VycZQUHpC/PFrsHnngEfi1aTQe2KTcn/@public.gmane.org \
--cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
--cc=grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org \
--cc=linux-mmc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=matt-agtwNxEcTQJWk0Htik3J/w@public.gmane.org \
--cc=nsekhar-l0cyMroinI0@public.gmane.org \
--cc=rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org \
--cc=spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
--cc=tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org \
--cc=vinod.koul-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).