linux-spi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v2 2/2] DMA: EDMA: Add comments for A-sync case calculations
@ 2013-06-27  3:42 Joel Fernandes
  0 siblings, 0 replies; only message in thread
From: Joel Fernandes @ 2013-06-27  3:42 UTC (permalink / raw)
  To: Tony Lindgren, Sekhar Nori, Matt Porter, Grant Likely,
	Rob Herring, Vinod Koul, Mark Brown, Benoit Cousson, Russell King,
	Rob Landley, Andrew Morton, Arnd Bergmann
  Cc: Linux DaVinci Kernel List, Linux Documentation List,
	Joel Fernandes, Devicetree Discuss, Linux MMC List,
	Linux Kernel Mailing List, Linux SPI Devel List, Linux OMAP List,
	Linux ARM Kernel List

A-sync case in EDMA driver is tricky and not so obvious.
Document the reasons for the calculations and the scenarious
they are used.

Signed-off-by: Joel Fernandes <joelf-l0cyMroinI0@public.gmane.org>
---
 drivers/dma/edma.c |   22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/drivers/dma/edma.c b/drivers/dma/edma.c
index e008ed2..a1d9f3785 100644
--- a/drivers/dma/edma.c
+++ b/drivers/dma/edma.c
@@ -284,8 +284,24 @@ static struct dma_async_tx_descriptor *edma_prep_slave_sg(
 		 */
 		if (burst == 1) {
 			edesc->absync = false;
+			/*
+			 * For the A-sync case, bcnt and ccnt are the remainder
+			 * and quotient respectively of the division of:
+			 * (sg_dma_len(sg) / acnt) by (SZ_64K -1). This is so
+			 * that in case bcnt over flows, we have ccnt to use.
+			 * Note: In A-sync tranfer only, bcntrld is used, but it
+			 * only applies for sg_dma_len(sg) >= SZ_64K.
+			 * In this case, the best way adopted is- bccnt for the
+			 * first frame will be the remainder below. Then for
+			 * every successive frame, bcnt will be SZ_64K-1. This
+			 * is assured as bcntrld = 0xffff in end of function.
+			 */
 			ccnt = sg_dma_len(sg) / acnt / (SZ_64K - 1);
 			bcnt = sg_dma_len(sg) / acnt - ccnt * (SZ_64K - 1);
+			/*
+			 * If bcnt is non-zero, we have a remainder and hence an
+			 * extra frame to transfer, so increment ccnt.
+			 */
 			if (bcnt)
 				ccnt++;
 			else
@@ -343,6 +359,12 @@ static struct dma_async_tx_descriptor *edma_prep_slave_sg(
 
 		edesc->pset[i].a_b_cnt = bcnt << 16 | acnt;
 		edesc->pset[i].ccnt = ccnt;
+		/*
+		 * Only time when (bcntrld) auto reload is required is for
+		 * A-sync case, and in this case, a requirement of reload value
+		 * of SZ_64K-1 only is assured. 'link' is initially set to NULL
+		 * and then later will be populated by edma_execute.
+		 */
 		edesc->pset[i].link_bcntrld = 0xffffffff;
 
 	}
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] only message in thread

only message in thread, other threads:[~2013-06-27  3:42 UTC | newest]

Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-06-27  3:42 [PATCH v2 2/2] DMA: EDMA: Add comments for A-sync case calculations Joel Fernandes

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).