From: Hou Zhiqiang <b48286-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
To: <linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
<linuxppc-dev-mnsaURCQ41sdnm+yROfE0A@public.gmane.org>
Cc: <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
<grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>,
<scottwood-KZfg59tc24xl57MIdRCFDg@public.gmane.org>,
<Mingkai.Hu-KZfg59tc24xl57MIdRCFDg@public.gmane.org>,
Hou Zhiqiang <b48286-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Subject: [PATCH v2] spi/fsl-espi: Add Power Management support for eSPI controller
Date: Thu, 12 Dec 2013 12:53:52 +0800 [thread overview]
Message-ID: <1386824032-19198-1-git-send-email-b48286@freescale.com> (raw)
Add PM support for eSPI controller using callback function suspend
and resume in .driver.pm of platform_driver.
Signed-off-by: Hou Zhiqiang <b48286-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
---
v2:
- Replace .driver.suspend and .driver.resume with .driver.pm
- Use CONFIG_PM_SLEEP instead of CONFIG_PM
- Add spi_master_suspend and spi_master_resume
drivers/spi/spi-fsl-espi.c | 61 ++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 61 insertions(+)
diff --git a/drivers/spi/spi-fsl-espi.c b/drivers/spi/spi-fsl-espi.c
index 8106006..428dc7a 100644
--- a/drivers/spi/spi-fsl-espi.c
+++ b/drivers/spi/spi-fsl-espi.c
@@ -727,6 +727,66 @@ static int of_fsl_espi_remove(struct platform_device *dev)
return mpc8xxx_spi_remove(&dev->dev);
}
+#ifdef CONFIG_PM_SLEEP
+static int of_fsl_espi_suspend(struct device *dev)
+{
+ struct spi_master *master = dev_get_drvdata(dev);
+ struct mpc8xxx_spi *mpc8xxx_spi;
+ struct fsl_espi_reg *reg_base;
+ u32 regval;
+ int ret;
+
+ mpc8xxx_spi = spi_master_get_devdata(master);
+ reg_base = mpc8xxx_spi->reg_base;
+
+ ret = spi_master_suspend(master);
+ if (ret) {
+ dev_warn(dev, "cannot suspend master\n");
+ return ret;
+ }
+
+ regval = mpc8xxx_spi_read_reg(®_base->mode);
+ regval &= ~SPMODE_ENABLE;
+ mpc8xxx_spi_write_reg(®_base->mode, regval);
+
+ return 0;
+}
+
+static int of_fsl_espi_resume(struct device *dev)
+{
+ struct fsl_spi_platform_data *pdata = dev_get_platdata(dev);
+ struct spi_master *master = dev_get_drvdata(dev);
+ struct mpc8xxx_spi *mpc8xxx_spi;
+ struct fsl_espi_reg *reg_base;
+ u32 regval;
+ int i;
+
+ mpc8xxx_spi = spi_master_get_devdata(master);
+ reg_base = mpc8xxx_spi->reg_base;
+
+ /* SPI controller initializations */
+ mpc8xxx_spi_write_reg(®_base->mode, 0);
+ mpc8xxx_spi_write_reg(®_base->mask, 0);
+ mpc8xxx_spi_write_reg(®_base->command, 0);
+ mpc8xxx_spi_write_reg(®_base->event, 0xffffffff);
+
+ /* Init eSPI CS mode register */
+ for (i = 0; i < pdata->max_chipselect; i++)
+ mpc8xxx_spi_write_reg(®_base->csmode[i], CSMODE_INIT_VAL);
+
+ /* Enable SPI interface */
+ regval = pdata->initial_spmode | SPMODE_INIT_VAL | SPMODE_ENABLE;
+
+ mpc8xxx_spi_write_reg(®_base->mode, regval);
+
+ return spi_master_resume(master);
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static const struct dev_pm_ops espi_pm = {
+ SET_SYSTEM_SLEEP_PM_OPS(of_fsl_espi_suspend, of_fsl_espi_resume)
+};
+
static const struct of_device_id of_fsl_espi_match[] = {
{ .compatible = "fsl,mpc8536-espi" },
{}
@@ -738,6 +798,7 @@ static struct platform_driver fsl_espi_driver = {
.name = "fsl_espi",
.owner = THIS_MODULE,
.of_match_table = of_fsl_espi_match,
+ .pm = &espi_pm,
},
.probe = of_fsl_espi_probe,
.remove = of_fsl_espi_remove,
--
1.8.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2013-12-12 4:53 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-12 4:53 Hou Zhiqiang [this message]
[not found] ` <1386824032-19198-1-git-send-email-b48286-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2013-12-12 11:56 ` [PATCH v2] spi/fsl-espi: Add Power Management support for eSPI controller Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1386824032-19198-1-git-send-email-b48286@freescale.com \
--to=b48286-kzfg59tc24xl57midrcfdg@public.gmane.org \
--cc=Mingkai.Hu-KZfg59tc24xl57MIdRCFDg@public.gmane.org \
--cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org \
--cc=linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linuxppc-dev-mnsaURCQ41sdnm+yROfE0A@public.gmane.org \
--cc=scottwood-KZfg59tc24xl57MIdRCFDg@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).