From: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
To: linux-sh@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org, linux-spi@vger.kernel.org,
Geert Uytterhoeven <geert+renesas@linux-m68k.org>,
devicetree@vger.kernel.org
Subject: [PATCH 5/6] [RFC] ARM: shmobile: r7s72100 dtsi: Add RSPI nodes
Date: Tue, 24 Dec 2013 12:56:49 +0100 [thread overview]
Message-ID: <1387886210-3634-6-git-send-email-geert+renesas@linux-m68k.org> (raw)
In-Reply-To: <1387886210-3634-1-git-send-email-geert+renesas@linux-m68k.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Cc: devicetree@vger.kernel.org
---
arch/arm/boot/dts/r7s72100.dtsi | 65 +++++++++++++++++++++++++++++++++++++++
1 file changed, 65 insertions(+)
diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index ff0bd6be454f..42e9b423476c 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -34,6 +34,11 @@
gpio10 = &port10;
gpio11 = &port11;
gpio12 = &jtagport0;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ spi2 = &spi2;
+ spi3 = &spi3;
+ spi4 = &spi4;
};
cpus {
@@ -289,4 +294,64 @@
clock-frequency = <100000>;
status = "disabled";
};
+
+ spi0: spi@e800c800 {
+ compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
+ reg = <0xe800c800 0x24>;
+ interrupts = <0 238 IRQ_TYPE_LEVEL_HIGH>,
+ <0 239 IRQ_TYPE_LEVEL_HIGH>,
+ <0 240 IRQ_TYPE_LEVEL_HIGH>;
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi1: spi@e800d000 {
+ compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
+ reg = <0xe800d000 0x24>;
+ interrupts = <0 241 IRQ_TYPE_LEVEL_HIGH>,
+ <0 242 IRQ_TYPE_LEVEL_HIGH>,
+ <0 243 IRQ_TYPE_LEVEL_HIGH>;
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi2: spi@e800d800 {
+ compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
+ reg = <0xe800d800 0x24>;
+ interrupts = <0 244 IRQ_TYPE_LEVEL_HIGH>,
+ <0 245 IRQ_TYPE_LEVEL_HIGH>,
+ <0 246 IRQ_TYPE_LEVEL_HIGH>;
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi3: spi@e800e000 {
+ compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
+ reg = <0xe800e000 0x24>;
+ interrupts = <0 247 IRQ_TYPE_LEVEL_HIGH>,
+ <0 248 IRQ_TYPE_LEVEL_HIGH>,
+ <0 249 IRQ_TYPE_LEVEL_HIGH>;
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi4: spi@e800e800 {
+ compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
+ reg = <0xe800e800 0x24>;
+ interrupts = <0 250 IRQ_TYPE_LEVEL_HIGH>,
+ <0 251 IRQ_TYPE_LEVEL_HIGH>,
+ <0 252 IRQ_TYPE_LEVEL_HIGH>;
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
--
1.7.9.5
next prev parent reply other threads:[~2013-12-24 11:56 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-24 11:56 [PATCH 0/6] Preliminary SoC and board integration for RSPI on RZ/A1H Geert Uytterhoeven
2013-12-24 11:56 ` [PATCH 1/6] pinctrl: sh-pfc: r7s72100: Add RSPI support Geert Uytterhoeven
2014-01-07 19:03 ` Linus Walleij
2014-01-07 19:07 ` Geert Uytterhoeven
2013-12-24 11:56 ` Geert Uytterhoeven [this message]
[not found] ` <1387886210-3634-1-git-send-email-geert+renesas-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org>
2013-12-24 11:56 ` [PATCH 2/6] ARM: shmobile: r7s72100: Add RSPI clocks Geert Uytterhoeven
2013-12-25 0:51 ` Kuninori Morimoto
2013-12-24 11:56 ` [PATCH 3/6] ARM: shmobile: r7s72100: Add RSPI resources Geert Uytterhoeven
2013-12-24 15:41 ` Sergei Shtylyov
2013-12-24 11:56 ` [PATCH 4/6] [RFC] Documentation: dt: Add Renesas RSPI/QSPI bindings Geert Uytterhoeven
[not found] ` <1387886210-3634-5-git-send-email-geert+renesas-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org>
2013-12-27 16:18 ` Laurent Pinchart
2013-12-27 19:01 ` Geert Uytterhoeven
[not found] ` <CAMuHMdXrPamASqFz8eCVxE0WKT=cdkrzxjDDT84m_AHT+1nmEA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2013-12-29 23:22 ` Laurent Pinchart
2013-12-30 9:37 ` Geert Uytterhoeven
[not found] ` <CAMuHMdUnf77Z1u=d8zFZk0vQtGJ9QhhCk6KVJsVKS-iMFSMUKw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2013-12-30 15:18 ` Laurent Pinchart
2013-12-30 17:20 ` Geert Uytterhoeven
2013-12-24 11:56 ` [PATCH 6/6] [RFC] arm: shmobile: genmai reference: Add RSPI nodes Geert Uytterhoeven
2013-12-24 15:45 ` Sergei Shtylyov
2013-12-24 19:46 ` Geert Uytterhoeven
2013-12-27 16:20 ` Laurent Pinchart
2013-12-27 19:08 ` Geert Uytterhoeven
[not found] ` <CAMuHMdVH4PyhxR3JLLPX9a3fKaEgdpQpd2aa4YKL6DUD8+Pw2Q-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2013-12-28 11:48 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1387886210-3634-6-git-send-email-geert+renesas@linux-m68k.org \
--to=geert+renesas@linux-m68k.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-sh@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).