From: Geert Uytterhoeven <geert@linux-m68k.org>
To: Simon Horman <horms@verge.net.au>, Magnus Damm <magnus.damm@gmail.com>
Cc: linux-sh@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-spi@vger.kernel.org, linux-kernel@vger.kernel.org,
Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Subject: [PATCH v4 02/15] ARM: shmobile: genmai legacy: Add RSPI support
Date: Fri, 24 Jan 2014 13:49:38 +0100 [thread overview]
Message-ID: <1390567791-8988-3-git-send-email-geert@linux-m68k.org> (raw)
In-Reply-To: <1390567791-8988-1-git-send-email-geert@linux-m68k.org>
From: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Add RSPI platform device, resources, platform data, and SPI child.
On this board, only rspi4 is in use. Its bus contains a single device
(a wm8978 audio codec).
Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
---
v4:
- The platform device basename was changed from "rspi" to "rspi-rz",
dropping the platform data flags in the process
- Switch to named IRQs
v3:
- Move platform devices from setup-r7s72100.c to board-genmai.c, as
genmai-reference will use devices instantiated from DT
- Merge with "ARM: shmobile: genmai: Add RSPI children", as this now
touches the same file
- Instantiate SPI children in C on genmai only, as genmai-reference will
instantiate them from DT
v2:
- Correct platform device names ("rspi%u.0" -> "rspi.%u")
- Add missing platform data
- Correct summary (resources -> platform devices)
arch/arm/mach-shmobile/board-genmai.c | 42 +++++++++++++++++++++++++++++++++
1 file changed, 42 insertions(+)
diff --git a/arch/arm/mach-shmobile/board-genmai.c b/arch/arm/mach-shmobile/board-genmai.c
index a1f6fe1fb06f..0b01b7f7e240 100644
--- a/arch/arm/mach-shmobile/board-genmai.c
+++ b/arch/arm/mach-shmobile/board-genmai.c
@@ -21,6 +21,8 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/sh_eth.h>
+#include <linux/spi/rspi.h>
+#include <linux/spi/spi.h>
#include <mach/common.h>
#include <mach/irqs.h>
#include <mach/r7s72100.h>
@@ -41,11 +43,51 @@ static const struct resource ether_resources[] __initconst = {
DEFINE_RES_IRQ(gic_iid(359)),
};
+/* RSPI */
+#define RSPI_RESOURCE(idx, baseaddr, irq) \
+static const struct resource rspi##idx##_resources[] __initconst = { \
+ DEFINE_RES_MEM(baseaddr, 0x24), \
+ DEFINE_RES_IRQ_NAMED(irq, "error"), \
+ DEFINE_RES_IRQ_NAMED(irq + 1, "rx"), \
+ DEFINE_RES_IRQ_NAMED(irq + 2, "tx"), \
+}
+
+RSPI_RESOURCE(0, 0xe800c800, gic_iid(270));
+RSPI_RESOURCE(1, 0xe800d000, gic_iid(273));
+RSPI_RESOURCE(2, 0xe800d800, gic_iid(276));
+RSPI_RESOURCE(3, 0xe800e000, gic_iid(279));
+RSPI_RESOURCE(4, 0xe800e800, gic_iid(282));
+
+static const struct rspi_plat_data rspi_pdata __initconst = {
+ .num_chipselect = 1,
+};
+
+#define r7s72100_register_rspi(idx) \
+ platform_device_register_resndata(&platform_bus, "rspi-rz", idx, \
+ rspi##idx##_resources, \
+ ARRAY_SIZE(rspi##idx##_resources), \
+ &rspi_pdata, sizeof(rspi_pdata))
+
+static const struct spi_board_info spi_info[] __initconst = {
+ {
+ .modalias = "wm8978",
+ .max_speed_hz = 5000000,
+ .bus_num = 4,
+ .chip_select = 0,
+ },
+};
+
static void __init genmai_add_standard_devices(void)
{
r7s72100_clock_init();
r7s72100_add_dt_devices();
+ r7s72100_register_rspi(0);
+ r7s72100_register_rspi(1);
+ r7s72100_register_rspi(2);
+ r7s72100_register_rspi(3);
+ r7s72100_register_rspi(4);
+ spi_register_board_info(spi_info, ARRAY_SIZE(spi_info));
platform_device_register_resndata(&platform_bus, "r7s72100-ether", -1,
ether_resources,
ARRAY_SIZE(ether_resources),
--
1.7.9.5
next prev parent reply other threads:[~2014-01-24 12:49 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-24 12:49 [PATCH 00/15] ARM: shmobile: RSPI RZ and QSPI SoC and board integration Geert Uytterhoeven
2014-01-24 12:49 ` [PATCH v4 01/15] ARM: shmobile: r7s72100 clock: Add RSPI clocks Geert Uytterhoeven
2014-01-24 12:49 ` Geert Uytterhoeven [this message]
2014-01-24 12:49 ` [PATCH v4 03/15] [WIP] ARM: shmobile: genmai legacy: Add preliminary RSPI pinmux setup Geert Uytterhoeven
[not found] ` <1390567791-8988-1-git-send-email-geert-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org>
2014-01-24 12:49 ` [PATCH v2 04/15] ARM: shmobile: genmai defconfig: Enable RSPI Geert Uytterhoeven
2014-01-24 12:49 ` [PATCH 14/15] ARM: shmobile: koelsch legacy: Enable Quad SPI transfers for the SPI FLASH Geert Uytterhoeven
2014-01-24 12:49 ` [PATCH 15/15] ARM: shmobile: koelsch dts: " Geert Uytterhoeven
2014-01-24 12:49 ` [PATCH v2 05/15] ARM: shmobile: r7s72100 clock: Add RSPI clocks for DT Geert Uytterhoeven
2014-01-24 12:49 ` [PATCH v4 06/15] ARM: shmobile: r7s72100 dtsi: Add RSPI nodes Geert Uytterhoeven
2014-01-24 12:49 ` [PATCH v4 07/15] ARM: shmobile: genmai reference dts: " Geert Uytterhoeven
2014-01-24 12:49 ` [PATCH v3 08/15] ARM: shmobile: r8a7791 clock: add QSPI clocks Geert Uytterhoeven
2014-01-24 12:49 ` [PATCH v3 09/15] ARM: shmobile: koelsch legacy: Add QSPI support Geert Uytterhoeven
2014-01-24 12:49 ` [PATCH v3 10/15] ARM: shmobile: koelsch defconfig: Enable RSPI and MTD_M25P80 Geert Uytterhoeven
2014-01-24 12:49 ` [PATCH v2 11/15] ARM: shmobile: r8a7791 dtsi: Add QSPI node Geert Uytterhoeven
2014-01-24 12:49 ` [PATCH v2 12/15] ARM: shmobile: koelsch dts: Add QSPI nodes Geert Uytterhoeven
2014-01-24 12:49 ` [PATCH 13/15] ARM: shmobile: lager legacy: Switch QSPI to named IRQs Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1390567791-8988-3-git-send-email-geert@linux-m68k.org \
--to=geert@linux-m68k.org \
--cc=geert+renesas@linux-m68k.org \
--cc=horms@verge.net.au \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sh@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=magnus.damm@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).