linux-spi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Geert Uytterhoeven <geert@linux-m68k.org>
To: Simon Horman <horms@verge.net.au>, Magnus Damm <magnus.damm@gmail.com>
Cc: linux-sh@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-spi@vger.kernel.org, linux-kernel@vger.kernel.org,
	Geert Uytterhoeven <geert+renesas@linux-m68k.org>,
	devicetree@vger.kernel.org
Subject: [PATCH v4 06/15] ARM: shmobile: r7s72100 dtsi: Add RSPI nodes
Date: Fri, 24 Jan 2014 13:49:42 +0100	[thread overview]
Message-ID: <1390567791-8988-7-git-send-email-geert@linux-m68k.org> (raw)
In-Reply-To: <1390567791-8988-1-git-send-email-geert@linux-m68k.org>

From: Geert Uytterhoeven <geert+renesas@linux-m68k.org>

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Cc: devicetree@vger.kernel.org
---
v4:
  - Switch to named IRQs
v3:
  - No changes
v2:
  - No changes

 arch/arm/boot/dts/r7s72100.dtsi |   70 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 70 insertions(+)

diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index ff0bd6be454f..d7013df6bb10 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -34,6 +34,11 @@
 		gpio10 = &port10;
 		gpio11 = &port11;
 		gpio12 = &jtagport0;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		spi2 = &spi2;
+		spi3 = &spi3;
+		spi4 = &spi4;
 	};
 
 	cpus {
@@ -289,4 +294,69 @@
 		clock-frequency = <100000>;
 		status = "disabled";
 	};
+
+	spi0: spi@e800c800 {
+		compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
+		reg = <0xe800c800 0x24>;
+		interrupts = <0 238 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 239 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 240 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "error", "rx", "tx";
+		num-cs = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi1: spi@e800d000 {
+		compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
+		reg = <0xe800d000 0x24>;
+		interrupts = <0 241 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 242 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 243 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "error", "rx", "tx";
+		num-cs = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi2: spi@e800d800 {
+		compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
+		reg = <0xe800d800 0x24>;
+		interrupts = <0 244 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 245 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 246 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "error", "rx", "tx";
+		num-cs = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi3: spi@e800e000 {
+		compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
+		reg = <0xe800e000 0x24>;
+		interrupts = <0 247 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 248 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 249 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "error", "rx", "tx";
+		num-cs = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi4: spi@e800e800 {
+		compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
+		reg = <0xe800e800 0x24>;
+		interrupts = <0 250 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 251 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 252 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "error", "rx", "tx";
+		num-cs = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
 };
-- 
1.7.9.5

  parent reply	other threads:[~2014-01-24 12:49 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-01-24 12:49 [PATCH 00/15] ARM: shmobile: RSPI RZ and QSPI SoC and board integration Geert Uytterhoeven
2014-01-24 12:49 ` [PATCH v4 01/15] ARM: shmobile: r7s72100 clock: Add RSPI clocks Geert Uytterhoeven
2014-01-24 12:49 ` [PATCH v4 02/15] ARM: shmobile: genmai legacy: Add RSPI support Geert Uytterhoeven
2014-01-24 12:49 ` [PATCH v4 03/15] [WIP] ARM: shmobile: genmai legacy: Add preliminary RSPI pinmux setup Geert Uytterhoeven
     [not found] ` <1390567791-8988-1-git-send-email-geert-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org>
2014-01-24 12:49   ` [PATCH v2 04/15] ARM: shmobile: genmai defconfig: Enable RSPI Geert Uytterhoeven
2014-01-24 12:49   ` [PATCH 14/15] ARM: shmobile: koelsch legacy: Enable Quad SPI transfers for the SPI FLASH Geert Uytterhoeven
2014-01-24 12:49   ` [PATCH 15/15] ARM: shmobile: koelsch dts: " Geert Uytterhoeven
2014-01-24 12:49 ` [PATCH v2 05/15] ARM: shmobile: r7s72100 clock: Add RSPI clocks for DT Geert Uytterhoeven
2014-01-24 12:49 ` Geert Uytterhoeven [this message]
2014-01-24 12:49 ` [PATCH v4 07/15] ARM: shmobile: genmai reference dts: Add RSPI nodes Geert Uytterhoeven
2014-01-24 12:49 ` [PATCH v3 08/15] ARM: shmobile: r8a7791 clock: add QSPI clocks Geert Uytterhoeven
2014-01-24 12:49 ` [PATCH v3 09/15] ARM: shmobile: koelsch legacy: Add QSPI support Geert Uytterhoeven
2014-01-24 12:49 ` [PATCH v3 10/15] ARM: shmobile: koelsch defconfig: Enable RSPI and MTD_M25P80 Geert Uytterhoeven
2014-01-24 12:49 ` [PATCH v2 11/15] ARM: shmobile: r8a7791 dtsi: Add QSPI node Geert Uytterhoeven
2014-01-24 12:49 ` [PATCH v2 12/15] ARM: shmobile: koelsch dts: Add QSPI nodes Geert Uytterhoeven
2014-01-24 12:49 ` [PATCH 13/15] ARM: shmobile: lager legacy: Switch QSPI to named IRQs Geert Uytterhoeven

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1390567791-8988-7-git-send-email-geert@linux-m68k.org \
    --to=geert@linux-m68k.org \
    --cc=devicetree@vger.kernel.org \
    --cc=geert+renesas@linux-m68k.org \
    --cc=horms@verge.net.au \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sh@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=magnus.damm@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).