[PATCH 1/2] spi: omap2-mcspi: Remove list_empty checking in omap2_mcspi_transfer_one_message

[PATCH 1/2] spi: omap2-mcspi: Remove list_empty checking in omap2_mcspi_transfer_one_message

[Axel Lin]

This checking is done in __spi_validate().

Signed-off-by: Axel Lin <axel.lin-8E1dMatC8ynQT0dZR+AlfA@public.gmane.org>
---
 drivers/spi/spi-omap2-mcspi.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
index 0493905..82cbe73 100644
--- a/drivers/spi/spi-omap2-mcspi.c
+++ b/drivers/spi/spi-omap2-mcspi.c
@@ -1207,9 +1207,6 @@ static int omap2_mcspi_transfer_one_message(struct spi_master *master,
 	m->actual_length = 0;
 	m->status = 0;
 
-	/* reject invalid messages and transfers */
-	if (list_empty(&m->transfers))
-		return -EINVAL;
 	list_for_each_entry(t, &m->transfers, transfer_list) {
 		const void	*tx_buf = t->tx_buf;
 		void		*rx_buf = t->rx_buf;
-- 
1.8.1.2



--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 2/2] spi: omap2-mcspi: Convert to let spi core validate transfer speed

[Axel Lin]

Set master->max_speed_hz and master->min_speed_hz then spi core will handle
checking transfer speed. So we can remove the same checking in this driver.

Signed-off-by: Axel Lin <axel.lin-8E1dMatC8ynQT0dZR+AlfA@public.gmane.org>
---
 drivers/spi/spi-omap2-mcspi.c | 11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)

diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
index 82cbe73..2941c5b 100644
--- a/drivers/spi/spi-omap2-mcspi.c
+++ b/drivers/spi/spi-omap2-mcspi.c
@@ -1212,8 +1212,7 @@ static int omap2_mcspi_transfer_one_message(struct spi_master *master,
 		void		*rx_buf = t->rx_buf;
 		unsigned	len = t->len;
 
-		if (t->speed_hz > OMAP2_MCSPI_MAX_FREQ
-				|| (len && !(rx_buf || tx_buf))) {
+		if ((len && !(rx_buf || tx_buf))) {
 			dev_dbg(mcspi->dev, "transfer: %d Hz, %d %s%s, %d bpw\n",
 					t->speed_hz,
 					len,
@@ -1222,12 +1221,6 @@ static int omap2_mcspi_transfer_one_message(struct spi_master *master,
 					t->bits_per_word);
 			return -EINVAL;
 		}
-		if (t->speed_hz && t->speed_hz < (OMAP2_MCSPI_MAX_FREQ >> 15)) {
-			dev_dbg(mcspi->dev, "speed_hz %d below minimum %d Hz\n",
-					t->speed_hz,
-					OMAP2_MCSPI_MAX_FREQ >> 15);
-			return -EINVAL;
-		}
 
 		if (m->is_dma_mapped || len < DMA_MIN_BYTES)
 			continue;
@@ -1339,6 +1332,8 @@ static int omap2_mcspi_probe(struct platform_device *pdev)
 	master->transfer_one_message = omap2_mcspi_transfer_one_message;
 	master->cleanup = omap2_mcspi_cleanup;
 	master->dev.of_node = node;
+	master->max_speed_hz = OMAP2_MCSPI_MAX_FREQ;
+	master->min_speed_hz = OMAP2_MCSPI_MAX_FREQ >> 15;
 
 	platform_set_drvdata(pdev, master);
 
-- 
1.8.1.2



--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 1/2] spi: omap2-mcspi: Remove list_empty checking in omap2_mcspi_transfer_one_message

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 126 bytes --]

On Tue, Feb 18, 2014 at 10:01:36PM +0800, Axel Lin wrote:
> This checking is done in __spi_validate().

Applied both, thanks.

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]