From: Axel Lin <axel.lin-8E1dMatC8ynQT0dZR+AlfA@public.gmane.org>
To: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: Wan ZongShun <mcuos.com-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH] spi: nuc900: Fix setting multiple bits settings in register
Date: Fri, 21 Mar 2014 13:24:14 +0800 [thread overview]
Message-ID: <1395379454.30136.2.camel@phoenix> (raw)
The correct way to set multiple bits settings is always clear these
bit fields before set new settings.
Current code does not cause problem because the reset value of these
bit fields are 0, and these settings only set once during probe.
Signed-off-by: Axel Lin <axel.lin-8E1dMatC8ynQT0dZR+AlfA@public.gmane.org>
---
drivers/spi/spi-nuc900.c | 18 ++++++++----------
1 file changed, 8 insertions(+), 10 deletions(-)
diff --git a/drivers/spi/spi-nuc900.c b/drivers/spi/spi-nuc900.c
index 675c210..16e30de 100644
--- a/drivers/spi/spi-nuc900.c
+++ b/drivers/spi/spi-nuc900.c
@@ -37,7 +37,9 @@
/* usi register bit */
#define ENINT (0x01 << 17)
#define ENFLG (0x01 << 16)
+#define SLEEP (0x0f << 12)
#define TXNUM (0x03 << 8)
+#define TXBITLEN (0x1f << 3)
#define TXNEG (0x01 << 2)
#define RXNEG (0x01 << 1)
#define LSB (0x01 << 10)
@@ -115,19 +117,16 @@ static void nuc900_spi_chipsel(struct spi_device *spi, int value)
}
}
-static void nuc900_spi_setup_txnum(struct nuc900_spi *hw,
- unsigned int txnum)
+static void nuc900_spi_setup_txnum(struct nuc900_spi *hw, unsigned int txnum)
{
unsigned int val;
unsigned long flags;
spin_lock_irqsave(&hw->lock, flags);
- val = __raw_readl(hw->regs + USI_CNT);
+ val = __raw_readl(hw->regs + USI_CNT) & ~TXNUM;
- if (!txnum)
- val &= ~TXNUM;
- else
+ if (txnum)
val |= txnum << 0x08;
__raw_writel(val, hw->regs + USI_CNT);
@@ -144,7 +143,7 @@ static void nuc900_spi_setup_txbitlen(struct nuc900_spi *hw,
spin_lock_irqsave(&hw->lock, flags);
- val = __raw_readl(hw->regs + USI_CNT);
+ val = __raw_readl(hw->regs + USI_CNT) & ~TXBITLEN;
val |= (txbitlen << 0x03);
@@ -283,12 +282,11 @@ static void nuc900_set_sleep(struct nuc900_spi *hw, unsigned int sleep)
spin_lock_irqsave(&hw->lock, flags);
- val = __raw_readl(hw->regs + USI_CNT);
+ val = __raw_readl(hw->regs + USI_CNT) & ~SLEEP;
if (sleep)
val |= (sleep << 12);
- else
- val &= ~(0x0f << 12);
+
__raw_writel(val, hw->regs + USI_CNT);
spin_unlock_irqrestore(&hw->lock, flags);
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2014-03-21 5:24 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-21 5:24 Axel Lin [this message]
2014-03-21 8:13 ` [PATCH] spi: nuc900: Fix setting multiple bits settings in register Geert Uytterhoeven
[not found] ` <CAMuHMdVYHnv2PGaerL50PhK_a1E=LaEwdkhHNgyaqX=WO-FOXA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-03-21 12:08 ` Mark Brown
2014-03-21 17:49 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1395379454.30136.2.camel@phoenix \
--to=axel.lin-8e1dmatc8ynqt0dzr+alfa@public.gmane.org \
--cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mcuos.com-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).