[PATCH 15/18] spi: rspi: Add DMA support for QSPI on R-Car Gen2

[Geert Uytterhoeven <geert+renesas@glider.be>]

Enable DMA support for QSPI on R-Car Gen2, for Single, Dual, and Quad SPI
Transfers.

Performance figures for reading from a QSPI FLASH driven at 24.375 MHz
on r8a7791/koelsch:
  - Single:  1.1 Mbps PIO, 23 Mbps DMA
  - Dual  : 12.7 Mbps PIO, 48 Mbps DMA
  - Quad  : 13   Mbps PIO, 70 Mbps DMA

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 drivers/spi/spi-rspi.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c
index b7f8be81423b..bec81470dd9c 100644
--- a/drivers/spi/spi-rspi.c
+++ b/drivers/spi/spi-rspi.c
@@ -642,6 +642,9 @@ static int qspi_transfer_out_in(struct rspi_data *rspi,
 
 	qspi_receive_init(rspi);
 
+	if (rspi->master->can_dma && __rspi_can_dma(rspi, xfer))
+		return rspi_dma_transfer(rspi, &xfer->tx_sg, &xfer->rx_sg);
+
 	ret = rspi_pio_transfer(rspi, xfer->tx_buf, xfer->rx_buf, xfer->len);
 	if (ret < 0)
 		return ret;
@@ -656,6 +659,9 @@ static int qspi_transfer_out(struct rspi_data *rspi, struct spi_transfer *xfer)
 {
 	int ret;
 
+	if (rspi->master->can_dma && __rspi_can_dma(rspi, xfer))
+		return rspi_dma_transfer(rspi, &xfer->tx_sg, NULL);
+
 	ret = rspi_pio_transfer(rspi, xfer->tx_buf, NULL, xfer->len);
 	if (ret < 0)
 		return ret;
@@ -668,6 +674,9 @@ static int qspi_transfer_out(struct rspi_data *rspi, struct spi_transfer *xfer)
 
 static int qspi_transfer_in(struct rspi_data *rspi, struct spi_transfer *xfer)
 {
+	if (rspi->master->can_dma && __rspi_can_dma(rspi, xfer))
+		return rspi_dma_transfer(rspi, NULL, &xfer->rx_sg);
+
 	return rspi_pio_transfer(rspi, NULL, xfer->rx_buf, xfer->len);
 }
 
-- 
1.9.1