From: Geert Uytterhoeven <geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
To: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: Laurent Pinchart
<Laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org>,
linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
dmaengine-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-sh-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Geert Uytterhoeven
<geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
Subject: [PATCH 1/2] spi: rspi: Fix leaking of unused DMA descriptors
Date: Fri, 11 Jul 2014 18:06:41 +0200 [thread overview]
Message-ID: <1405094802-14401-1-git-send-email-geert+renesas@glider.be> (raw)
If dmaengine_prep_slave_sg() or dmaengine_submit() fail, we may leak
unused DMA descriptors.
As per Documentation/dmaengine.txt, once a DMA descriptor has been
obtained, it must be submitted. Hence:
- First prepare and submit all DMA descriptors,
- Prepare the SPI controller for DMA,
- Start DMA by calling dma_async_issue_pending(),
- Make sure to call dmaengine_terminate_all() on all descriptors that
haven't completed.
Reported-by: Laurent Pinchart <laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
---
drivers/spi/spi-rspi.c | 94 +++++++++++++++++++++++++++++++-------------------
1 file changed, 58 insertions(+), 36 deletions(-)
diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c
index c850dfdfa9e3..ad87a98f8f68 100644
--- a/drivers/spi/spi-rspi.c
+++ b/drivers/spi/spi-rspi.c
@@ -472,25 +472,52 @@ static int rspi_dma_transfer(struct rspi_data *rspi, struct sg_table *tx,
dma_cookie_t cookie;
int ret;
- if (tx) {
- desc_tx = dmaengine_prep_slave_sg(rspi->master->dma_tx,
- tx->sgl, tx->nents, DMA_TO_DEVICE,
- DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
- if (!desc_tx)
- goto no_dma;
-
- irq_mask |= SPCR_SPTIE;
- }
+ /* First prepare and submit the DMA request(s), as this may fail */
if (rx) {
desc_rx = dmaengine_prep_slave_sg(rspi->master->dma_rx,
rx->sgl, rx->nents, DMA_FROM_DEVICE,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
- if (!desc_rx)
- goto no_dma;
+ if (!desc_rx) {
+ ret = -EAGAIN;
+ goto no_dma_rx;
+ }
+
+ desc_rx->callback = rspi_dma_complete;
+ desc_rx->callback_param = rspi;
+ cookie = dmaengine_submit(desc_rx);
+ if (dma_submit_error(cookie)) {
+ ret = cookie;
+ goto no_dma_rx;
+ }
irq_mask |= SPCR_SPRIE;
}
+ if (tx) {
+ desc_tx = dmaengine_prep_slave_sg(rspi->master->dma_tx,
+ tx->sgl, tx->nents, DMA_TO_DEVICE,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!desc_tx) {
+ ret = -EAGAIN;
+ goto no_dma_tx;
+ }
+
+ if (rx) {
+ /* No callback */
+ desc_tx->callback = NULL;
+ } else {
+ desc_tx->callback = rspi_dma_complete;
+ desc_tx->callback_param = rspi;
+ }
+ cookie = dmaengine_submit(desc_tx);
+ if (dma_submit_error(cookie)) {
+ ret = cookie;
+ goto no_dma_tx;
+ }
+
+ irq_mask |= SPCR_SPTIE;
+ }
+
/*
* DMAC needs SPxIE, but if SPxIE is set, the IRQ routine will be
* called. So, this driver disables the IRQ while DMA transfer.
@@ -503,34 +530,24 @@ static int rspi_dma_transfer(struct rspi_data *rspi, struct sg_table *tx,
rspi_enable_irq(rspi, irq_mask);
rspi->dma_callbacked = 0;
- if (rx) {
- desc_rx->callback = rspi_dma_complete;
- desc_rx->callback_param = rspi;
- cookie = dmaengine_submit(desc_rx);
- if (dma_submit_error(cookie))
- return cookie;
+ /* Now start DMA */
+ if (rx)
dma_async_issue_pending(rspi->master->dma_rx);
- }
- if (tx) {
- if (rx) {
- /* No callback */
- desc_tx->callback = NULL;
- } else {
- desc_tx->callback = rspi_dma_complete;
- desc_tx->callback_param = rspi;
- }
- cookie = dmaengine_submit(desc_tx);
- if (dma_submit_error(cookie))
- return cookie;
+ if (tx)
dma_async_issue_pending(rspi->master->dma_tx);
- }
ret = wait_event_interruptible_timeout(rspi->wait,
rspi->dma_callbacked, HZ);
if (ret > 0 && rspi->dma_callbacked)
ret = 0;
- else if (!ret)
+ else if (!ret) {
+ dev_err(&rspi->master->dev, "DMA timeout\n");
ret = -ETIMEDOUT;
+ if (tx)
+ dmaengine_terminate_all(rspi->master->dma_tx);
+ if (rx)
+ dmaengine_terminate_all(rspi->master->dma_rx);
+ }
rspi_disable_irq(rspi, irq_mask);
@@ -541,11 +558,16 @@ static int rspi_dma_transfer(struct rspi_data *rspi, struct sg_table *tx,
return ret;
-no_dma:
- pr_warn_once("%s %s: DMA not available, falling back to PIO\n",
- dev_driver_string(&rspi->master->dev),
- dev_name(&rspi->master->dev));
- return -EAGAIN;
+no_dma_tx:
+ if (rx)
+ dmaengine_terminate_all(rspi->master->dma_rx);
+no_dma_rx:
+ if (ret == -EAGAIN) {
+ pr_warn_once("%s %s: DMA not available, falling back to PIO\n",
+ dev_driver_string(&rspi->master->dev),
+ dev_name(&rspi->master->dev));
+ }
+ return ret;
}
static void rspi_receive_init(const struct rspi_data *rspi)
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2014-07-11 16:06 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-11 16:06 Geert Uytterhoeven [this message]
[not found] ` <1405094802-14401-1-git-send-email-geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
2014-07-11 16:06 ` [PATCH 2/2] spi: sh-msiof: Fix leaking of unused DMA descriptors Geert Uytterhoeven
2014-07-14 18:59 ` Mark Brown
2014-07-14 18:58 ` [PATCH 1/2] spi: rspi: " Mark Brown
[not found] ` <20140714185830.GE6800-GFdadSzt00ze9xe1eoZjHA@public.gmane.org>
2014-08-05 14:34 ` Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1405094802-14401-1-git-send-email-geert+renesas@glider.be \
--to=geert+renesas-gxvu3+zwzmszqb+pc5nmwq@public.gmane.org \
--cc=Laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org \
--cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=dmaengine-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-sh-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).