From: Geert Uytterhoeven <geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
To: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: Laurent Pinchart
<Laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org>,
linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
dmaengine-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-sh-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Geert Uytterhoeven
<geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
Subject: [PATCH 2/2] spi: sh-msiof: Fix leaking of unused DMA descriptors
Date: Fri, 11 Jul 2014 18:06:42 +0200 [thread overview]
Message-ID: <1405094802-14401-2-git-send-email-geert+renesas@glider.be> (raw)
In-Reply-To: <1405094802-14401-1-git-send-email-geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
If dmaengine_prep_slave_sg() or dmaengine_submit() fail, we may leak
unused DMA descriptors.
As per Documentation/dmaengine.txt, once a DMA descriptor has been
obtained, it must be submitted. Hence:
- First prepare and submit all DMA descriptors,
- Prepare the SPI controller for DMA,
- Start DMA by calling dma_async_issue_pending(),
- Make sure to call dmaengine_terminate_all() on all descriptors that
haven't completed.
Reported-by: Laurent Pinchart <laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
---
drivers/spi/spi-sh-msiof.c | 71 +++++++++++++++++++++++++---------------------
1 file changed, 38 insertions(+), 33 deletions(-)
diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c
index 2a4354dcd661..887c2084130f 100644
--- a/drivers/spi/spi-sh-msiof.c
+++ b/drivers/spi/spi-sh-msiof.c
@@ -636,48 +636,38 @@ static int sh_msiof_dma_once(struct sh_msiof_spi_priv *p, const void *tx,
dma_cookie_t cookie;
int ret;
- if (tx) {
- ier_bits |= IER_TDREQE | IER_TDMAE;
- dma_sync_single_for_device(p->master->dma_tx->device->dev,
- p->tx_dma_addr, len, DMA_TO_DEVICE);
- desc_tx = dmaengine_prep_slave_single(p->master->dma_tx,
- p->tx_dma_addr, len, DMA_TO_DEVICE,
- DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
- if (!desc_tx)
- return -EAGAIN;
- }
-
+ /* First prepare and submit the DMA request(s), as this may fail */
if (rx) {
ier_bits |= IER_RDREQE | IER_RDMAE;
desc_rx = dmaengine_prep_slave_single(p->master->dma_rx,
p->rx_dma_addr, len, DMA_FROM_DEVICE,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
- if (!desc_rx)
- return -EAGAIN;
- }
-
- /* 1 stage FIFO watermarks for DMA */
- sh_msiof_write(p, FCTR, FCTR_TFWM_1 | FCTR_RFWM_1);
-
- /* setup msiof transfer mode registers (32-bit words) */
- sh_msiof_spi_set_mode_regs(p, tx, rx, 32, len / 4);
-
- sh_msiof_write(p, IER, ier_bits);
-
- reinit_completion(&p->done);
+ if (!desc_rx) {
+ ret = -EAGAIN;
+ goto no_dma_rx;
+ }
- if (rx) {
desc_rx->callback = sh_msiof_dma_complete;
desc_rx->callback_param = p;
cookie = dmaengine_submit(desc_rx);
if (dma_submit_error(cookie)) {
ret = cookie;
- goto stop_ier;
+ goto no_dma_rx;
}
- dma_async_issue_pending(p->master->dma_rx);
}
if (tx) {
+ ier_bits |= IER_TDREQE | IER_TDMAE;
+ dma_sync_single_for_device(p->master->dma_tx->device->dev,
+ p->tx_dma_addr, len, DMA_TO_DEVICE);
+ desc_tx = dmaengine_prep_slave_single(p->master->dma_tx,
+ p->tx_dma_addr, len, DMA_TO_DEVICE,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!desc_tx) {
+ ret = -EAGAIN;
+ goto no_dma_tx;
+ }
+
if (rx) {
/* No callback */
desc_tx->callback = NULL;
@@ -688,15 +678,30 @@ static int sh_msiof_dma_once(struct sh_msiof_spi_priv *p, const void *tx,
cookie = dmaengine_submit(desc_tx);
if (dma_submit_error(cookie)) {
ret = cookie;
- goto stop_rx;
+ goto no_dma_tx;
}
- dma_async_issue_pending(p->master->dma_tx);
}
+ /* 1 stage FIFO watermarks for DMA */
+ sh_msiof_write(p, FCTR, FCTR_TFWM_1 | FCTR_RFWM_1);
+
+ /* setup msiof transfer mode registers (32-bit words) */
+ sh_msiof_spi_set_mode_regs(p, tx, rx, 32, len / 4);
+
+ sh_msiof_write(p, IER, ier_bits);
+
+ reinit_completion(&p->done);
+
+ /* Now start DMA */
+ if (tx)
+ dma_async_issue_pending(p->master->dma_rx);
+ if (rx)
+ dma_async_issue_pending(p->master->dma_tx);
+
ret = sh_msiof_spi_start(p, rx);
if (ret) {
dev_err(&p->pdev->dev, "failed to start hardware\n");
- goto stop_tx;
+ goto stop_dma;
}
/* wait for tx fifo to be emptied / rx fifo to be filled */
@@ -726,14 +731,14 @@ static int sh_msiof_dma_once(struct sh_msiof_spi_priv *p, const void *tx,
stop_reset:
sh_msiof_reset_str(p);
sh_msiof_spi_stop(p, rx);
-stop_tx:
+stop_dma:
if (tx)
dmaengine_terminate_all(p->master->dma_tx);
-stop_rx:
+no_dma_tx:
if (rx)
dmaengine_terminate_all(p->master->dma_rx);
-stop_ier:
sh_msiof_write(p, IER, 0);
+no_dma_rx:
return ret;
}
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2014-07-11 16:06 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-11 16:06 [PATCH 1/2] spi: rspi: Fix leaking of unused DMA descriptors Geert Uytterhoeven
[not found] ` <1405094802-14401-1-git-send-email-geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
2014-07-11 16:06 ` Geert Uytterhoeven [this message]
2014-07-14 18:59 ` [PATCH 2/2] spi: sh-msiof: " Mark Brown
2014-07-14 18:58 ` [PATCH 1/2] spi: rspi: " Mark Brown
[not found] ` <20140714185830.GE6800-GFdadSzt00ze9xe1eoZjHA@public.gmane.org>
2014-08-05 14:34 ` Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1405094802-14401-2-git-send-email-geert+renesas@glider.be \
--to=geert+renesas-gxvu3+zwzmszqb+pc5nmwq@public.gmane.org \
--cc=Laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org \
--cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=dmaengine-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-sh-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).