From: Andy Shevchenko <andriy.shevchenko-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
To: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Andy Shevchenko
<andriy.shevchenko-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
Subject: [PATCH v3 3/5] spi: dw-pci: convert to use dev_pm_ops
Date: Fri, 29 Aug 2014 12:41:41 +0300 [thread overview]
Message-ID: <1409305303-32631-4-git-send-email-andriy.shevchenko@linux.intel.com> (raw)
In-Reply-To: <1409305303-32631-1-git-send-email-andriy.shevchenko-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
Convert system PM callbacks to use dev_pm_ops. In addition remove the PCI calls
related to a power state since the bus code cares about this already.
Signed-off-by: Andy Shevchenko <andriy.shevchenko-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
---
drivers/spi/spi-dw-pci.c | 33 +++++++++++----------------------
1 file changed, 11 insertions(+), 22 deletions(-)
diff --git a/drivers/spi/spi-dw-pci.c b/drivers/spi/spi-dw-pci.c
index 473bd52..3774261 100644
--- a/drivers/spi/spi-dw-pci.c
+++ b/drivers/spi/spi-dw-pci.c
@@ -95,38 +95,26 @@ static void spi_pci_remove(struct pci_dev *pdev)
dw_spi_remove_host(&dwpci->dws);
}
-#ifdef CONFIG_PM
-static int spi_suspend(struct pci_dev *pdev, pm_message_t state)
+#ifdef CONFIG_PM_SLEEP
+static int spi_suspend(struct device *dev)
{
+ struct pci_dev *pdev = to_pci_dev(dev);
struct dw_spi_pci *dwpci = pci_get_drvdata(pdev);
- int ret;
- ret = dw_spi_suspend_host(&dwpci->dws);
- if (ret)
- return ret;
- pci_save_state(pdev);
- pci_disable_device(pdev);
- pci_set_power_state(pdev, pci_choose_state(pdev, state));
- return ret;
+ return dw_spi_suspend_host(&dwpci->dws);
}
-static int spi_resume(struct pci_dev *pdev)
+static int spi_resume(struct device *dev)
{
+ struct pci_dev *pdev = to_pci_dev(dev);
struct dw_spi_pci *dwpci = pci_get_drvdata(pdev);
- int ret;
- pci_set_power_state(pdev, PCI_D0);
- pci_restore_state(pdev);
- ret = pci_enable_device(pdev);
- if (ret)
- return ret;
return dw_spi_resume_host(&dwpci->dws);
}
-#else
-#define spi_suspend NULL
-#define spi_resume NULL
#endif
+static SIMPLE_DEV_PM_OPS(dw_spi_pm_ops, spi_suspend, spi_resume);
+
static const struct pci_device_id pci_ids[] = {
/* Intel MID platform SPI controller 0 */
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0800) },
@@ -138,8 +126,9 @@ static struct pci_driver dw_spi_driver = {
.id_table = pci_ids,
.probe = spi_pci_probe,
.remove = spi_pci_remove,
- .suspend = spi_suspend,
- .resume = spi_resume,
+ .driver = {
+ .pm = &dw_spi_pm_ops,
+ },
};
module_pci_driver(dw_spi_driver);
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2014-08-29 9:41 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-29 9:41 [PATCH v3 0/5] spi: dw-pci: cleanup the driver Andy Shevchenko
[not found] ` <1409305303-32631-1-git-send-email-andriy.shevchenko-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2014-08-29 9:41 ` [PATCH v3 1/5] spi: dw-pci: move info message at the end of probe Andy Shevchenko
2014-08-29 9:41 ` [PATCH v3 2/5] spi: dw-pci: apply pci_bar and re-use pci_name Andy Shevchenko
2014-08-29 9:41 ` Andy Shevchenko [this message]
2014-08-29 9:41 ` [PATCH v3 4/5] spi: dw-pci: provide platform specific data via driver_data Andy Shevchenko
2014-08-29 9:41 ` [PATCH v3 5/5] spi: dw-pci: remove FSF address and update copyright Andy Shevchenko
2014-08-29 10:56 ` [PATCH v3 0/5] spi: dw-pci: cleanup the driver Mark Brown
[not found] ` <20140829105635.GM29327-GFdadSzt00ze9xe1eoZjHA@public.gmane.org>
2014-08-29 11:14 ` Andy Shevchenko
2014-09-01 10:29 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1409305303-32631-4-git-send-email-andriy.shevchenko@linux.intel.com \
--to=andriy.shevchenko-vuqaysv1563yd54fqh9/ca@public.gmane.org \
--cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).