From: Andy Shevchenko <andriy.shevchenko-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
To: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Vinod Koul <vinod.koul-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Cc: Andy Shevchenko
<andriy.shevchenko-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
Subject: [PATCH 2/3] spi: dw-mid: convert to use DMAengine wrappers
Date: Thu, 2 Oct 2014 16:31:08 +0300 [thread overview]
Message-ID: <1412256669-14828-2-git-send-email-andriy.shevchenko@linux.intel.com> (raw)
In-Reply-To: <1412256669-14828-1-git-send-email-andriy.shevchenko-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
Instead of direct dereference to dmaengine callbacks we are going to use
DMAengine wrappers.
Signed-off-by: Andy Shevchenko <andriy.shevchenko-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
---
drivers/spi/spi-dw-mid.c | 19 +++++++------------
1 file changed, 7 insertions(+), 12 deletions(-)
diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c
index 7bdf937..a507add 100644
--- a/drivers/spi/spi-dw-mid.c
+++ b/drivers/spi/spi-dw-mid.c
@@ -113,8 +113,7 @@ static void dw_spi_dma_done(void *arg)
static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change)
{
- struct dma_async_tx_descriptor *txdesc = NULL, *rxdesc = NULL;
- struct dma_chan *txchan, *rxchan;
+ struct dma_async_tx_descriptor *txdesc, *rxdesc;
struct dma_slave_config txconf, rxconf;
u16 dma_ctrl = 0;
@@ -132,8 +131,6 @@ static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change)
}
dws->dma_chan_done = 0;
- txchan = dws->txchan;
- rxchan = dws->rxchan;
/* 2. Prepare the TX dma transfer */
txconf.direction = DMA_MEM_TO_DEV;
@@ -143,14 +140,13 @@ static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change)
txconf.dst_addr_width = dws->dma_width;
txconf.device_fc = false;
- txchan->device->device_control(txchan, DMA_SLAVE_CONFIG,
- (unsigned long) &txconf);
+ dmaengine_slave_config(dws->txchan, &txconf);
memset(&dws->tx_sgl, 0, sizeof(dws->tx_sgl));
dws->tx_sgl.dma_address = dws->tx_dma;
dws->tx_sgl.length = dws->len;
- txdesc = dmaengine_prep_slave_sg(txchan,
+ txdesc = dmaengine_prep_slave_sg(dws->txchan,
&dws->tx_sgl,
1,
DMA_MEM_TO_DEV,
@@ -166,14 +162,13 @@ static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change)
rxconf.src_addr_width = dws->dma_width;
rxconf.device_fc = false;
- rxchan->device->device_control(rxchan, DMA_SLAVE_CONFIG,
- (unsigned long) &rxconf);
+ dmaengine_slave_config(dws->rxchan, &rxconf);
memset(&dws->rx_sgl, 0, sizeof(dws->rx_sgl));
dws->rx_sgl.dma_address = dws->rx_dma;
dws->rx_sgl.length = dws->len;
- rxdesc = dmaengine_prep_slave_sg(rxchan,
+ rxdesc = dmaengine_prep_slave_sg(dws->rxchan,
&dws->rx_sgl,
1,
DMA_DEV_TO_MEM,
@@ -182,8 +177,8 @@ static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change)
rxdesc->callback_param = dws;
/* rx must be started before tx due to spi instinct */
- rxdesc->tx_submit(rxdesc);
- txdesc->tx_submit(txdesc);
+ dmaengine_submit(rxdesc);
+ dmaengine_submit(txdesc);
return 0;
}
--
2.1.1
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2014-10-02 13:31 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-02 13:31 [PATCH 1/3] spi: dw-mid: change magic numbers to the constants Andy Shevchenko
[not found] ` <1412256669-14828-1-git-send-email-andriy.shevchenko-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2014-10-02 13:31 ` Andy Shevchenko [this message]
2014-10-02 13:31 ` [PATCH 3/3] spi: dw-mid: follow new DMAengine workflow Andy Shevchenko
2014-10-02 16:06 ` [PATCH 1/3] spi: dw-mid: change magic numbers to the constants Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1412256669-14828-2-git-send-email-andriy.shevchenko@linux.intel.com \
--to=andriy.shevchenko-vuqaysv1563yd54fqh9/ca@public.gmane.org \
--cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=vinod.koul-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).