From mboxrd@z Thu Jan 1 00:00:00 1970 From: Beniamino Galvani Subject: [PATCH 1/3] spi: meson: Add device tree bindings documentation for SPIFC Date: Sun, 9 Nov 2014 10:25:11 +0100 Message-ID: <1415525113-25598-2-git-send-email-b.galvani@gmail.com> References: <1415525113-25598-1-git-send-email-b.galvani@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Cc: Mark Rutland , devicetree@vger.kernel.org, Victor Wan , Pawel Moll , Ian Campbell , linux-kernel@vger.kernel.org, linux-spi@vger.kernel.org, Beniamino Galvani , Rob Herring , Kumar Gala , Carlo Caione , Jerry Cao , linux-arm-kernel@lists.infradead.org To: Mark Brown Return-path: In-Reply-To: <1415525113-25598-1-git-send-email-b.galvani@gmail.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org List-Id: linux-spi.vger.kernel.org This adds documentation of device tree bindings for the Amlogic Meson SPIFC (SPI Flash Controller). Signed-off-by: Beniamino Galvani --- .../devicetree/bindings/spi/spi-meson.txt | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) create mode 100644 Documentation/devicetree/bindings/spi/spi-meson.txt diff --git a/Documentation/devicetree/bindings/spi/spi-meson.txt b/Documentation/devicetree/bindings/spi/spi-meson.txt new file mode 100644 index 0000000..bb52a86 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-meson.txt @@ -0,0 +1,22 @@ +Amlogic Meson SPI controllers + +* SPIFC (SPI Flash Controller) + +The Meson SPIFC is a controller optimized for communication with SPI +NOR memories, without DMA support and a 64-byte unified transmit / +receive buffer. + +Required properties: + - compatible: should be "amlogic,meson6-spifc" + - reg: physical base address and length of the controller registers + - clocks: phandle of the input clock for the baud rate generator + - #address-cells: should be 1 + - #size-cells: should be 0 + + spi@c1108c80 { + compatible = "amlogic,meson6-spifc"; + reg = <0xc1108c80 0x80>; + clocks = <&clk81>; + #address-cells = <1>; + #size-cells = <0>; + }; -- 1.9.1