[PATCH v3 0/7] spi: dw: make DMA working

[PATCH v3 0/7] spi: dw: make DMA working

[Andy Shevchenko]

This patch series is dedicated to make DMA working on Intel Medfield device
with SPI DW and DW DMA. The previous version would be found here [1].

The patch 3/7 is a bugfix, though it's not marked as a fix to reduce a noise on
stable kernels, where DMA wasn't working properly anyway. Last one is the
removal of old DMA driver, since the only user of it in upstream was SPI DW.

Vinod, since the patch 7/7 removes the driver your are author of, please give
your Ack. Reliminary answer, as I remember, was okay to remove.

The driver was tested in loop back mode. It looks like there are not so many
users of it right now, but I would really appreciate if anyone could test the
driver on different hardware platforms (to be sure that I didn't break it).

As a side effect the patch 6/7 fixes the memore leak in probe(). Mark, we
discussed that bug earlier in last year.

[1] http://www.spinics.net/lists/linux-spi/msg03013.html

Changelog v3:
- rebase on top of recent spi/for-next

Changelog v2:
- change the approach (most of the patches were rewritten)
- rebased on top of recent linux-next
- added IRQ handler for DMA case to cover FIFO overrun/underrun issue

Andy Shevchenko (7):
  spi: dw-mid: convert value of dma_width to enum dma_slave_buswidth
  spi: dw-mid: split dma_setup() from dma_transfer()
  spi: dw-mid: take care of FIFO overrun/underrun when do DMA
  spi: dw-mid: clear ongoing DMA transfers on timeout
  spi: dw-mid: move to use core SPI DMA mappings
  spi: dw-mid: convert to use dw_dmac instead of intel_mid_dma
  dmaengine: intel-mid-dma: remove the driver

 drivers/dma/Kconfig              |   13 -
 drivers/dma/Makefile             |    1 -
 drivers/dma/intel_mid_dma.c      | 1447 --------------------------------------
 drivers/dma/intel_mid_dma_regs.h |  299 --------
 drivers/spi/Kconfig              |    2 +-
 drivers/spi/spi-dw-mid.c         |  157 +++--
 drivers/spi/spi-dw.c             |   74 +-
 drivers/spi/spi-dw.h             |   22 +-
 include/linux/intel_mid_dma.h    |   76 --
 9 files changed, 137 insertions(+), 1954 deletions(-)
 delete mode 100644 drivers/dma/intel_mid_dma.c
 delete mode 100644 drivers/dma/intel_mid_dma_regs.h
 delete mode 100644 include/linux/intel_mid_dma.h

-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 1/7] spi: dw-mid: convert value of dma_width to enum dma_slave_buswidth

[Andy Shevchenko]

DMAEngine has a specific type to be used for bus width. This patch converts the
code to use the values of the specific type when configure DMA transfer.

Signed-off-by: Andy Shevchenko <andriy.shevchenko-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
---
 drivers/spi/spi-dw-mid.c | 13 +++++++++++--
 drivers/spi/spi-dw.c     | 12 ++++++++----
 2 files changed, 19 insertions(+), 6 deletions(-)

diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c
index c8416ef..25c8fa7 100644
--- a/drivers/spi/spi-dw-mid.c
+++ b/drivers/spi/spi-dw-mid.c
@@ -100,6 +100,15 @@ static void mid_spi_dma_exit(struct dw_spi *dws)
 	dma_release_channel(dws->rxchan);
 }
 
+static enum dma_slave_buswidth convert_dma_width(u32 dma_width) {
+	if (dma_width == 1)
+		return DMA_SLAVE_BUSWIDTH_1_BYTE;
+	else if (dma_width == 2)
+		return DMA_SLAVE_BUSWIDTH_2_BYTES;
+
+	return DMA_SLAVE_BUSWIDTH_UNDEFINED;
+}
+
 /*
  * dws->dma_chan_busy is set before the dma transfer starts, callback for tx
  * channel will clear a corresponding bit.
@@ -126,7 +135,7 @@ static struct dma_async_tx_descriptor *dw_spi_dma_prepare_tx(struct dw_spi *dws)
 	txconf.dst_addr = dws->dma_addr;
 	txconf.dst_maxburst = LNW_DMA_MSIZE_16;
 	txconf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
-	txconf.dst_addr_width = dws->dma_width;
+	txconf.dst_addr_width = convert_dma_width(dws->dma_width);
 	txconf.device_fc = false;
 
 	dmaengine_slave_config(dws->txchan, &txconf);
@@ -175,7 +184,7 @@ static struct dma_async_tx_descriptor *dw_spi_dma_prepare_rx(struct dw_spi *dws)
 	rxconf.src_addr = dws->dma_addr;
 	rxconf.src_maxburst = LNW_DMA_MSIZE_16;
 	rxconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
-	rxconf.src_addr_width = dws->dma_width;
+	rxconf.src_addr_width = convert_dma_width(dws->dma_width);
 	rxconf.device_fc = false;
 
 	dmaengine_slave_config(dws->rxchan, &rxconf);
diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c
index 950bc50..f3e4092 100644
--- a/drivers/spi/spi-dw.c
+++ b/drivers/spi/spi-dw.c
@@ -315,7 +315,6 @@ static int dw_spi_transfer_one(struct spi_master *master,
 {
 	struct dw_spi *dws = spi_master_get_devdata(master);
 	struct chip_data *chip = spi_get_ctldata(spi);
-	u8 bits = 0;
 	u8 imask = 0;
 	u8 cs_change = 0;
 	u16 txlevel = 0;
@@ -357,9 +356,14 @@ static int dw_spi_transfer_one(struct spi_master *master,
 		}
 	}
 	if (transfer->bits_per_word) {
-		bits = transfer->bits_per_word;
-		dws->n_bytes = dws->dma_width = bits >> 3;
-		cr0 = (bits - 1)
+		if (transfer->bits_per_word == 8) {
+			dws->n_bytes = 1;
+			dws->dma_width = 1;
+		} else if (transfer->bits_per_word == 16) {
+			dws->n_bytes = 2;
+			dws->dma_width = 2;
+		}
+		cr0 = (transfer->bits_per_word - 1)
 			| (chip->type << SPI_FRF_OFFSET)
 			| (spi->mode << SPI_MODE_OFFSET)
 			| (chip->tmode << SPI_TMOD_OFFSET);
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 2/7] spi: dw-mid: split dma_setup() from dma_transfer()

[Andy Shevchenko]

The patch splits DMA preparatory code to dma_setup() callback. The change also
converts transfer_one() to program DMA whenever the transfer is DMA mapped. The
change is a follow up of the converion to use SPI core transfer_one_message().
Since the DMA mapped transfers can be interleaved with PIO ones the DMA related
configuration should respect that.

Signed-off-by: Andy Shevchenko <andriy.shevchenko-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
---
 drivers/spi/spi-dw-mid.c | 17 ++++++-----------
 drivers/spi/spi-dw.c     | 23 +++++++++++++----------
 drivers/spi/spi-dw.h     |  4 ++--
 3 files changed, 21 insertions(+), 23 deletions(-)

diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c
index 25c8fa7..4b4d266 100644
--- a/drivers/spi/spi-dw-mid.c
+++ b/drivers/spi/spi-dw-mid.c
@@ -207,12 +207,10 @@ static struct dma_async_tx_descriptor *dw_spi_dma_prepare_rx(struct dw_spi *dws)
 	return rxdesc;
 }
 
-static void dw_spi_dma_setup(struct dw_spi *dws)
+static int mid_spi_dma_setup(struct dw_spi *dws)
 {
 	u16 dma_ctrl = 0;
 
-	spi_enable_chip(dws, 0);
-
 	dw_writew(dws, DW_SPI_DMARDLR, 0xf);
 	dw_writew(dws, DW_SPI_DMATDLR, 0x10);
 
@@ -222,21 +220,17 @@ static void dw_spi_dma_setup(struct dw_spi *dws)
 		dma_ctrl |= SPI_DMA_RDMAE;
 	dw_writew(dws, DW_SPI_DMACR, dma_ctrl);
 
-	spi_enable_chip(dws, 1);
+	return 0;
 }
 
-static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change)
+static int mid_spi_dma_transfer(struct dw_spi *dws)
 {
 	struct dma_async_tx_descriptor *txdesc, *rxdesc;
 
-	/* 1. setup DMA related registers */
-	if (cs_change)
-		dw_spi_dma_setup(dws);
-
-	/* 2. Prepare the TX dma transfer */
+	/* Prepare the TX dma transfer */
 	txdesc = dw_spi_dma_prepare_tx(dws);
 
-	/* 3. Prepare the RX dma transfer */
+	/* Prepare the RX dma transfer */
 	rxdesc = dw_spi_dma_prepare_rx(dws);
 
 	/* rx must be started before tx due to spi instinct */
@@ -258,6 +252,7 @@ static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change)
 static struct dw_spi_dma_ops mid_dma_ops = {
 	.dma_init	= mid_spi_dma_init,
 	.dma_exit	= mid_spi_dma_exit,
+	.dma_setup	= mid_spi_dma_setup,
 	.dma_transfer	= mid_spi_dma_transfer,
 };
 #endif
diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c
index f3e4092..c7c2fcc 100644
--- a/drivers/spi/spi-dw.c
+++ b/drivers/spi/spi-dw.c
@@ -316,11 +316,11 @@ static int dw_spi_transfer_one(struct spi_master *master,
 	struct dw_spi *dws = spi_master_get_devdata(master);
 	struct chip_data *chip = spi_get_ctldata(spi);
 	u8 imask = 0;
-	u8 cs_change = 0;
 	u16 txlevel = 0;
 	u16 clk_div = 0;
 	u32 speed = 0;
 	u32 cr0 = 0;
+	int ret;
 
 	dws->n_bytes = chip->n_bytes;
 	dws->dma_width = chip->dma_width;
@@ -332,8 +332,6 @@ static int dw_spi_transfer_one(struct spi_master *master,
 	dws->rx = transfer->rx_buf;
 	dws->rx_end = dws->rx + transfer->len;
 	dws->len = transfer->len;
-	if (chip != dws->prev_chip)
-		cs_change = 1;
 
 	spi_enable_chip(dws, 0);
 
@@ -397,7 +395,13 @@ static int dw_spi_transfer_one(struct spi_master *master,
 	 * Interrupt mode
 	 * we only need set the TXEI IRQ, as TX/RX always happen syncronizely
 	 */
-	if (!dws->dma_mapped && !chip->poll_mode) {
+	if (dws->dma_mapped) {
+		ret = dws->dma_ops->dma_setup(dws);
+		if (ret < 0) {
+			spi_enable_chip(dws, 1);
+			return ret;
+		}
+	} else if (!chip->poll_mode) {
 		txlevel = min_t(u16, dws->fifo_len / 2, dws->len / dws->n_bytes);
 		dw_writew(dws, DW_SPI_TXFLTR, txlevel);
 
@@ -411,11 +415,11 @@ static int dw_spi_transfer_one(struct spi_master *master,
 
 	spi_enable_chip(dws, 1);
 
-	if (cs_change)
-		dws->prev_chip = chip;
-
-	if (dws->dma_mapped)
-		dws->dma_ops->dma_transfer(dws, cs_change);
+	if (dws->dma_mapped) {
+		ret = dws->dma_ops->dma_transfer(dws);
+		if (ret < 0)
+			return ret;
+	}
 
 	if (chip->poll_mode)
 		return poll_transfer(dws);
@@ -546,7 +550,6 @@ int dw_spi_add_host(struct device *dev, struct dw_spi *dws)
 
 	dws->master = master;
 	dws->type = SSI_MOTO_SPI;
-	dws->prev_chip = NULL;
 	dws->dma_inited = 0;
 	dws->dma_addr = (dma_addr_t)(dws->paddr + 0x60);
 	snprintf(dws->name, sizeof(dws->name), "dw_spi%d", dws->bus_num);
diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h
index 855bfdd..7351692 100644
--- a/drivers/spi/spi-dw.h
+++ b/drivers/spi/spi-dw.h
@@ -91,7 +91,8 @@ struct dw_spi;
 struct dw_spi_dma_ops {
 	int (*dma_init)(struct dw_spi *dws);
 	void (*dma_exit)(struct dw_spi *dws);
-	int (*dma_transfer)(struct dw_spi *dws, int cs_change);
+	int (*dma_setup)(struct dw_spi *dws);
+	int (*dma_transfer)(struct dw_spi *dws);
 };
 
 struct dw_spi {
@@ -109,7 +110,6 @@ struct dw_spi {
 	u16			num_cs;		/* supported slave numbers */
 
 	/* Current message transfer state info */
-	struct chip_data	*prev_chip;
 	size_t			len;
 	void			*tx;
 	void			*tx_end;
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 3/7] spi: dw-mid: take care of FIFO overrun/underrun when do DMA

[Andy Shevchenko]

In according to documentation SPI in DMA mode may encounter underrun/overrun
failures in rare cases. When such failure occurs, an error recovery protocol is
expected to be implemented in the device driver so that the failed transaction
can be restarted.

This patch enables FIFO overrun / underrun interrupts in DMA case and adds a
handler for that.

Signed-off-by: Andy Shevchenko <andriy.shevchenko-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
---
 drivers/spi/spi-dw-mid.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c
index 4b4d266..3729cdd 100644
--- a/drivers/spi/spi-dw-mid.c
+++ b/drivers/spi/spi-dw-mid.c
@@ -100,6 +100,22 @@ static void mid_spi_dma_exit(struct dw_spi *dws)
 	dma_release_channel(dws->rxchan);
 }
 
+static irqreturn_t dma_transfer(struct dw_spi *dws)
+{
+	u16 irq_status = dw_readw(dws, DW_SPI_ISR);
+
+	if (!irq_status)
+		return IRQ_NONE;
+
+	dw_readw(dws, DW_SPI_ICR);
+	spi_reset_chip(dws);
+
+	dev_err(&dws->master->dev, "%s: FIFO overrun/underrun\n", __func__);
+	dws->master->cur_msg->status = -EIO;
+	spi_finalize_current_transfer(dws->master);
+	return IRQ_HANDLED;
+}
+
 static enum dma_slave_buswidth convert_dma_width(u32 dma_width) {
 	if (dma_width == 1)
 		return DMA_SLAVE_BUSWIDTH_1_BYTE;
@@ -220,6 +236,11 @@ static int mid_spi_dma_setup(struct dw_spi *dws)
 		dma_ctrl |= SPI_DMA_RDMAE;
 	dw_writew(dws, DW_SPI_DMACR, dma_ctrl);
 
+	/* Set the interrupt mask */
+	spi_umask_intr(dws, SPI_INT_TXOI | SPI_INT_RXUI | SPI_INT_RXOI);
+
+	dws->transfer_handler = dma_transfer;
+
 	return 0;
 }
 
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 4/7] spi: dw-mid: clear ongoing DMA transfers on timeout

[Andy Shevchenko]

This patch shuts up any ongoing DMA transfer in case of error.

Signed-off-by: Andy Shevchenko <andriy.shevchenko-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
---
 drivers/spi/spi-dw-mid.c | 13 +++++++++++++
 drivers/spi/spi-dw.c     |  3 +++
 drivers/spi/spi-dw.h     |  1 +
 3 files changed, 17 insertions(+)

diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c
index 3729cdd..e614190 100644
--- a/drivers/spi/spi-dw-mid.c
+++ b/drivers/spi/spi-dw-mid.c
@@ -270,11 +270,24 @@ static int mid_spi_dma_transfer(struct dw_spi *dws)
 	return 0;
 }
 
+static void mid_spi_dma_stop(struct dw_spi *dws)
+{
+	if (test_bit(TX_BUSY, &dws->dma_chan_busy)) {
+		dmaengine_terminate_all(dws->txchan);
+		clear_bit(TX_BUSY, &dws->dma_chan_busy);
+	}
+	if (test_bit(RX_BUSY, &dws->dma_chan_busy)) {
+		dmaengine_terminate_all(dws->rxchan);
+		clear_bit(RX_BUSY, &dws->dma_chan_busy);
+	}
+}
+
 static struct dw_spi_dma_ops mid_dma_ops = {
 	.dma_init	= mid_spi_dma_init,
 	.dma_exit	= mid_spi_dma_exit,
 	.dma_setup	= mid_spi_dma_setup,
 	.dma_transfer	= mid_spi_dma_transfer,
+	.dma_stop	= mid_spi_dma_stop,
 };
 #endif
 
diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c
index c7c2fcc..d53cffe 100644
--- a/drivers/spi/spi-dw.c
+++ b/drivers/spi/spi-dw.c
@@ -432,6 +432,9 @@ static void dw_spi_handle_err(struct spi_master *master,
 {
 	struct dw_spi *dws = spi_master_get_devdata(master);
 
+	if (dws->dma_mapped)
+		dws->dma_ops->dma_stop(dws);
+
 	spi_reset_chip(dws);
 }
 
diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h
index 7351692..7f130bd 100644
--- a/drivers/spi/spi-dw.h
+++ b/drivers/spi/spi-dw.h
@@ -93,6 +93,7 @@ struct dw_spi_dma_ops {
 	void (*dma_exit)(struct dw_spi *dws);
 	int (*dma_setup)(struct dw_spi *dws);
 	int (*dma_transfer)(struct dw_spi *dws);
+	void (*dma_stop)(struct dw_spi *dws);
 };
 
 struct dw_spi {
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 5/7] spi: dw-mid: move to use core SPI DMA mappings

[Andy Shevchenko]

SPI core has a comprehensive function set to map and unmap a message when it's
needed. This patch converts driver to use that advantage.

Signed-off-by: Andy Shevchenko <andriy.shevchenko-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
---
 drivers/spi/spi-dw-mid.c | 52 ++++++++++++++++++++++++++++--------------------
 drivers/spi/spi-dw.c     | 40 +++++++------------------------------
 drivers/spi/spi-dw.h     | 17 ++++++----------
 3 files changed, 43 insertions(+), 66 deletions(-)

diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c
index e614190..599dad4 100644
--- a/drivers/spi/spi-dw-mid.c
+++ b/drivers/spi/spi-dw-mid.c
@@ -69,6 +69,7 @@ static int mid_spi_dma_init(struct dw_spi *dws)
 	rxs->hs_mode = LNW_DMA_HW_HS;
 	rxs->cfg_mode = LNW_DMA_PER_TO_MEM;
 	dws->rxchan->private = rxs;
+	dws->master->dma_rx = dws->rxchan;
 
 	/* 2. Init tx channel */
 	dws->txchan = dma_request_channel(mask, mid_spi_dma_chan_filter, dws);
@@ -78,6 +79,7 @@ static int mid_spi_dma_init(struct dw_spi *dws)
 	txs->hs_mode = LNW_DMA_HW_HS;
 	txs->cfg_mode = LNW_DMA_MEM_TO_PER;
 	dws->txchan->private = txs;
+	dws->master->dma_tx = dws->txchan;
 
 	dws->dma_inited = 1;
 	return 0;
@@ -116,6 +118,17 @@ static irqreturn_t dma_transfer(struct dw_spi *dws)
 	return IRQ_HANDLED;
 }
 
+static bool mid_spi_can_dma(struct spi_master *master, struct spi_device *spi,
+		struct spi_transfer *xfer)
+{
+	struct dw_spi *dws = spi_master_get_devdata(master);
+
+	if (!dws->dma_inited)
+		return false;
+
+	return xfer->len > dws->fifo_len;
+}
+
 static enum dma_slave_buswidth convert_dma_width(u32 dma_width) {
 	if (dma_width == 1)
 		return DMA_SLAVE_BUSWIDTH_1_BYTE;
@@ -139,12 +152,13 @@ static void dw_spi_dma_tx_done(void *arg)
 	spi_finalize_current_transfer(dws->master);
 }
 
-static struct dma_async_tx_descriptor *dw_spi_dma_prepare_tx(struct dw_spi *dws)
+static struct dma_async_tx_descriptor *dw_spi_dma_prepare_tx(struct dw_spi *dws,
+		struct spi_transfer *xfer)
 {
 	struct dma_slave_config txconf;
 	struct dma_async_tx_descriptor *txdesc;
 
-	if (!dws->tx_dma)
+	if (!xfer->tx_buf)
 		return NULL;
 
 	txconf.direction = DMA_MEM_TO_DEV;
@@ -156,13 +170,9 @@ static struct dma_async_tx_descriptor *dw_spi_dma_prepare_tx(struct dw_spi *dws)
 
 	dmaengine_slave_config(dws->txchan, &txconf);
 
-	memset(&dws->tx_sgl, 0, sizeof(dws->tx_sgl));
-	dws->tx_sgl.dma_address = dws->tx_dma;
-	dws->tx_sgl.length = dws->len;
-
 	txdesc = dmaengine_prep_slave_sg(dws->txchan,
-				&dws->tx_sgl,
-				1,
+				xfer->tx_sg.sgl,
+				xfer->tx_sg.nents,
 				DMA_MEM_TO_DEV,
 				DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	if (!txdesc)
@@ -188,12 +198,13 @@ static void dw_spi_dma_rx_done(void *arg)
 	spi_finalize_current_transfer(dws->master);
 }
 
-static struct dma_async_tx_descriptor *dw_spi_dma_prepare_rx(struct dw_spi *dws)
+static struct dma_async_tx_descriptor *dw_spi_dma_prepare_rx(struct dw_spi *dws,
+		struct spi_transfer *xfer)
 {
 	struct dma_slave_config rxconf;
 	struct dma_async_tx_descriptor *rxdesc;
 
-	if (!dws->rx_dma)
+	if (!xfer->rx_buf)
 		return NULL;
 
 	rxconf.direction = DMA_DEV_TO_MEM;
@@ -205,13 +216,9 @@ static struct dma_async_tx_descriptor *dw_spi_dma_prepare_rx(struct dw_spi *dws)
 
 	dmaengine_slave_config(dws->rxchan, &rxconf);
 
-	memset(&dws->rx_sgl, 0, sizeof(dws->rx_sgl));
-	dws->rx_sgl.dma_address = dws->rx_dma;
-	dws->rx_sgl.length = dws->len;
-
 	rxdesc = dmaengine_prep_slave_sg(dws->rxchan,
-				&dws->rx_sgl,
-				1,
+				xfer->rx_sg.sgl,
+				xfer->rx_sg.nents,
 				DMA_DEV_TO_MEM,
 				DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	if (!rxdesc)
@@ -223,16 +230,16 @@ static struct dma_async_tx_descriptor *dw_spi_dma_prepare_rx(struct dw_spi *dws)
 	return rxdesc;
 }
 
-static int mid_spi_dma_setup(struct dw_spi *dws)
+static int mid_spi_dma_setup(struct dw_spi *dws, struct spi_transfer *xfer)
 {
 	u16 dma_ctrl = 0;
 
 	dw_writew(dws, DW_SPI_DMARDLR, 0xf);
 	dw_writew(dws, DW_SPI_DMATDLR, 0x10);
 
-	if (dws->tx_dma)
+	if (xfer->tx_buf)
 		dma_ctrl |= SPI_DMA_TDMAE;
-	if (dws->rx_dma)
+	if (xfer->rx_buf)
 		dma_ctrl |= SPI_DMA_RDMAE;
 	dw_writew(dws, DW_SPI_DMACR, dma_ctrl);
 
@@ -244,15 +251,15 @@ static int mid_spi_dma_setup(struct dw_spi *dws)
 	return 0;
 }
 
-static int mid_spi_dma_transfer(struct dw_spi *dws)
+static int mid_spi_dma_transfer(struct dw_spi *dws, struct spi_transfer *xfer)
 {
 	struct dma_async_tx_descriptor *txdesc, *rxdesc;
 
 	/* Prepare the TX dma transfer */
-	txdesc = dw_spi_dma_prepare_tx(dws);
+	txdesc = dw_spi_dma_prepare_tx(dws, xfer);
 
 	/* Prepare the RX dma transfer */
-	rxdesc = dw_spi_dma_prepare_rx(dws);
+	rxdesc = dw_spi_dma_prepare_rx(dws, xfer);
 
 	/* rx must be started before tx due to spi instinct */
 	if (rxdesc) {
@@ -286,6 +293,7 @@ static struct dw_spi_dma_ops mid_dma_ops = {
 	.dma_init	= mid_spi_dma_init,
 	.dma_exit	= mid_spi_dma_exit,
 	.dma_setup	= mid_spi_dma_setup,
+	.can_dma	= mid_spi_can_dma,
 	.dma_transfer	= mid_spi_dma_transfer,
 	.dma_stop	= mid_spi_dma_stop,
 };
diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c
index d53cffe..2437bfc 100644
--- a/drivers/spi/spi-dw.c
+++ b/drivers/spi/spi-dw.c
@@ -217,32 +217,6 @@ static void dw_reader(struct dw_spi *dws)
 	}
 }
 
-/*
- * Note: first step is the protocol driver prepares
- * a dma-capable memory, and this func just need translate
- * the virt addr to physical
- */
-static int map_dma_buffers(struct spi_master *master,
-		struct spi_device *spi, struct spi_transfer *transfer)
-{
-	struct dw_spi *dws = spi_master_get_devdata(master);
-	struct chip_data *chip = spi_get_ctldata(spi);
-
-	if (!master->cur_msg->is_dma_mapped
-		|| !dws->dma_inited
-		|| !chip->enable_dma
-		|| !dws->dma_ops)
-		return 0;
-
-	if (transfer->tx_dma)
-		dws->tx_dma = transfer->tx_dma;
-
-	if (transfer->rx_dma)
-		dws->rx_dma = transfer->rx_dma;
-
-	return 1;
-}
-
 static void int_error_stop(struct dw_spi *dws, const char *msg)
 {
 	spi_reset_chip(dws);
@@ -322,11 +296,10 @@ static int dw_spi_transfer_one(struct spi_master *master,
 	u32 cr0 = 0;
 	int ret;
 
+	dws->dma_mapped = 0;
 	dws->n_bytes = chip->n_bytes;
 	dws->dma_width = chip->dma_width;
 
-	dws->rx_dma = transfer->rx_dma;
-	dws->tx_dma = transfer->tx_dma;
 	dws->tx = (void *)transfer->tx_buf;
 	dws->tx_end = dws->tx + transfer->len;
 	dws->rx = transfer->rx_buf;
@@ -386,7 +359,8 @@ static int dw_spi_transfer_one(struct spi_master *master,
 	dw_writew(dws, DW_SPI_CTRL0, cr0);
 
 	/* Check if current transfer is a DMA transaction */
-	dws->dma_mapped = map_dma_buffers(master, spi, transfer);
+	if (master->can_dma && master->can_dma(master, spi, transfer))
+		dws->dma_mapped = master->cur_msg_mapped;
 
 	/* For poll mode just disable all interrupts */
 	spi_mask_intr(dws, 0xff);
@@ -396,7 +370,7 @@ static int dw_spi_transfer_one(struct spi_master *master,
 	 * we only need set the TXEI IRQ, as TX/RX always happen syncronizely
 	 */
 	if (dws->dma_mapped) {
-		ret = dws->dma_ops->dma_setup(dws);
+		ret = dws->dma_ops->dma_setup(dws, transfer);
 		if (ret < 0) {
 			spi_enable_chip(dws, 1);
 			return ret;
@@ -416,7 +390,7 @@ static int dw_spi_transfer_one(struct spi_master *master,
 	spi_enable_chip(dws, 1);
 
 	if (dws->dma_mapped) {
-		ret = dws->dma_ops->dma_transfer(dws);
+		ret = dws->dma_ops->dma_transfer(dws, transfer);
 		if (ret < 0)
 			return ret;
 	}
@@ -470,8 +444,6 @@ static int dw_spi_setup(struct spi_device *spi)
 
 		chip->rx_threshold = 0;
 		chip->tx_threshold = 0;
-
-		chip->enable_dma = chip_info->enable_dma;
 	}
 
 	if (spi->bits_per_word == 8) {
@@ -584,6 +556,8 @@ int dw_spi_add_host(struct device *dev, struct dw_spi *dws)
 		if (ret) {
 			dev_warn(dev, "DMA init failed\n");
 			dws->dma_inited = 0;
+		} else {
+			master->can_dma = dws->dma_ops->can_dma;
 		}
 	}
 
diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h
index 7f130bd..f298df5 100644
--- a/drivers/spi/spi-dw.h
+++ b/drivers/spi/spi-dw.h
@@ -91,8 +91,10 @@ struct dw_spi;
 struct dw_spi_dma_ops {
 	int (*dma_init)(struct dw_spi *dws);
 	void (*dma_exit)(struct dw_spi *dws);
-	int (*dma_setup)(struct dw_spi *dws);
-	int (*dma_transfer)(struct dw_spi *dws);
+	int (*dma_setup)(struct dw_spi *dws, struct spi_transfer *xfer);
+	bool (*can_dma)(struct spi_master *master, struct spi_device *spi,
+			struct spi_transfer *xfer);
+	int (*dma_transfer)(struct dw_spi *dws, struct spi_transfer *xfer);
 	void (*dma_stop)(struct dw_spi *dws);
 };
 
@@ -117,20 +119,14 @@ struct dw_spi {
 	void			*rx;
 	void			*rx_end;
 	int			dma_mapped;
-	dma_addr_t		rx_dma;
-	dma_addr_t		tx_dma;
-	size_t			rx_map_len;
-	size_t			tx_map_len;
 	u8			n_bytes;	/* current is a 1/2 bytes op */
 	u32			dma_width;
 	irqreturn_t		(*transfer_handler)(struct dw_spi *dws);
 
-	/* Dma info */
+	/* DMA info */
 	int			dma_inited;
 	struct dma_chan		*txchan;
-	struct scatterlist	tx_sgl;
 	struct dma_chan		*rxchan;
-	struct scatterlist	rx_sgl;
 	unsigned long		dma_chan_busy;
 	struct device		*dma_dev;
 	dma_addr_t		dma_addr; /* phy address of the Data register */
@@ -206,14 +202,13 @@ static inline void spi_reset_chip(struct dw_spi *dws)
 
 /*
  * Each SPI slave device to work with dw_api controller should
- * has such a structure claiming its working mode (PIO/DMA etc),
+ * has such a structure claiming its working mode (poll or PIO/DMA),
  * which can be save in the "controller_data" member of the
  * struct spi_device.
  */
 struct dw_spi_chip {
 	u8 poll_mode;	/* 1 for controller polling mode */
 	u8 type;	/* SPI/SSP/MicroWire */
-	u8 enable_dma;
 	void (*cs_control)(u32 command);
 };
 
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 6/7] spi: dw-mid: convert to use dw_dmac instead of intel_mid_dma

[Andy Shevchenko]

intel_mid_dma seems to be unmaintained for a long time. Moreover, the IP block
of DMA itself is the same in both dw_dmac and intel_mid_dma. This patch moves
spi-dw-midpci to use dw_dmac driver.

Signed-off-by: Andy Shevchenko <andriy.shevchenko-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
---
 drivers/spi/Kconfig      |  2 +-
 drivers/spi/spi-dw-mid.c | 45 +++++++++++++++++++--------------------------
 drivers/spi/spi-dw.h     |  4 ++--
 3 files changed, 22 insertions(+), 29 deletions(-)

diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index ab8dfbe..9131079 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -632,7 +632,7 @@ config SPI_DW_PCI
 
 config SPI_DW_MID_DMA
 	bool "DMA support for DW SPI controller on Intel MID platform"
-	depends on SPI_DW_PCI && INTEL_MID_DMAC
+	depends on SPI_DW_PCI && DW_DMAC_PCI
 
 config SPI_DW_MMIO
 	tristate "Memory-mapped io interface driver for DW SPI core"
diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c
index 599dad4..d4109f6 100644
--- a/drivers/spi/spi-dw-mid.c
+++ b/drivers/spi/spi-dw-mid.c
@@ -23,29 +23,31 @@
 #include "spi-dw.h"
 
 #ifdef CONFIG_SPI_DW_MID_DMA
-#include <linux/intel_mid_dma.h>
 #include <linux/pci.h>
+#include <linux/platform_data/dma-dw.h>
 
 #define RX_BUSY		0
 #define TX_BUSY		1
 
-struct mid_dma {
-	struct intel_mid_dma_slave	dmas_tx;
-	struct intel_mid_dma_slave	dmas_rx;
-};
+static struct dw_dma_slave mid_dma_tx = { .dst_id = 1 };
+static struct dw_dma_slave mid_dma_rx = { .src_id = 0 };
 
 static bool mid_spi_dma_chan_filter(struct dma_chan *chan, void *param)
 {
-	struct dw_spi *dws = param;
+	struct dw_dma_slave *s = param;
+
+	if (s->dma_dev != chan->device->dev)
+		return false;
 
-	return dws->dma_dev == chan->device->dev;
+	chan->private = s;
+	return true;
 }
 
 static int mid_spi_dma_init(struct dw_spi *dws)
 {
-	struct mid_dma *dw_dma = dws->dma_priv;
 	struct pci_dev *dma_dev;
-	struct intel_mid_dma_slave *rxs, *txs;
+	struct dw_dma_slave *tx = dws->dma_tx;
+	struct dw_dma_slave *rx = dws->dma_rx;
 	dma_cap_mask_t mask;
 
 	/*
@@ -56,29 +58,21 @@ static int mid_spi_dma_init(struct dw_spi *dws)
 	if (!dma_dev)
 		return -ENODEV;
 
-	dws->dma_dev = &dma_dev->dev;
-
 	dma_cap_zero(mask);
 	dma_cap_set(DMA_SLAVE, mask);
 
 	/* 1. Init rx channel */
-	dws->rxchan = dma_request_channel(mask, mid_spi_dma_chan_filter, dws);
+	rx->dma_dev = &dma_dev->dev;
+	dws->rxchan = dma_request_channel(mask, mid_spi_dma_chan_filter, rx);
 	if (!dws->rxchan)
 		goto err_exit;
-	rxs = &dw_dma->dmas_rx;
-	rxs->hs_mode = LNW_DMA_HW_HS;
-	rxs->cfg_mode = LNW_DMA_PER_TO_MEM;
-	dws->rxchan->private = rxs;
 	dws->master->dma_rx = dws->rxchan;
 
 	/* 2. Init tx channel */
-	dws->txchan = dma_request_channel(mask, mid_spi_dma_chan_filter, dws);
+	tx->dma_dev = &dma_dev->dev;
+	dws->txchan = dma_request_channel(mask, mid_spi_dma_chan_filter, tx);
 	if (!dws->txchan)
 		goto free_rxchan;
-	txs = &dw_dma->dmas_tx;
-	txs->hs_mode = LNW_DMA_HW_HS;
-	txs->cfg_mode = LNW_DMA_MEM_TO_PER;
-	dws->txchan->private = txs;
 	dws->master->dma_tx = dws->txchan;
 
 	dws->dma_inited = 1;
@@ -163,7 +157,7 @@ static struct dma_async_tx_descriptor *dw_spi_dma_prepare_tx(struct dw_spi *dws,
 
 	txconf.direction = DMA_MEM_TO_DEV;
 	txconf.dst_addr = dws->dma_addr;
-	txconf.dst_maxburst = LNW_DMA_MSIZE_16;
+	txconf.dst_maxburst = 16;
 	txconf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
 	txconf.dst_addr_width = convert_dma_width(dws->dma_width);
 	txconf.device_fc = false;
@@ -209,7 +203,7 @@ static struct dma_async_tx_descriptor *dw_spi_dma_prepare_rx(struct dw_spi *dws,
 
 	rxconf.direction = DMA_DEV_TO_MEM;
 	rxconf.src_addr = dws->dma_addr;
-	rxconf.src_maxburst = LNW_DMA_MSIZE_16;
+	rxconf.src_maxburst = 16;
 	rxconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
 	rxconf.src_addr_width = convert_dma_width(dws->dma_width);
 	rxconf.device_fc = false;
@@ -328,9 +322,8 @@ int dw_spi_mid_init(struct dw_spi *dws)
 	iounmap(clk_reg);
 
 #ifdef CONFIG_SPI_DW_MID_DMA
-	dws->dma_priv = kzalloc(sizeof(struct mid_dma), GFP_KERNEL);
-	if (!dws->dma_priv)
-		return -ENOMEM;
+	dws->dma_tx = &mid_dma_tx;
+	dws->dma_rx = &mid_dma_rx;
 	dws->dma_ops = &mid_dma_ops;
 #endif
 	return 0;
diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h
index f298df5..41f77e2 100644
--- a/drivers/spi/spi-dw.h
+++ b/drivers/spi/spi-dw.h
@@ -128,10 +128,10 @@ struct dw_spi {
 	struct dma_chan		*txchan;
 	struct dma_chan		*rxchan;
 	unsigned long		dma_chan_busy;
-	struct device		*dma_dev;
 	dma_addr_t		dma_addr; /* phy address of the Data register */
 	struct dw_spi_dma_ops	*dma_ops;
-	void			*dma_priv; /* platform relate info */
+	void			*dma_tx;
+	void			*dma_rx;
 
 	/* Bus interface info */
 	void			*priv;
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 7/7] dmaengine: intel-mid-dma: remove the driver

[Andy Shevchenko]

Since the last and the only user of this driver is converted to use dw_dmac we
can remove driver from the tree.

Moreover, besides the driver is unmaintained a long time, it serves for the
DesignWare DMA IP, for which we have already driver in the tree.

Cc: Vinod Koul <vinod.koul-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Cc: dmaengine-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Signed-off-by: Andy Shevchenko <andriy.shevchenko-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
---
 drivers/dma/Kconfig              |   13 -
 drivers/dma/Makefile             |    1 -
 drivers/dma/intel_mid_dma.c      | 1447 --------------------------------------
 drivers/dma/intel_mid_dma_regs.h |  299 --------
 include/linux/intel_mid_dma.h    |   76 --
 5 files changed, 1836 deletions(-)
 delete mode 100644 drivers/dma/intel_mid_dma.c
 delete mode 100644 drivers/dma/intel_mid_dma_regs.h
 delete mode 100644 include/linux/intel_mid_dma.h

diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 074ffad..91eced0 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -51,19 +51,6 @@ config INTEL_MIC_X100_DMA
 	  OS and tools for MIC to use with this driver are available from
 	  <http://software.intel.com/en-us/mic-developer>.
 
-config INTEL_MID_DMAC
-	tristate "Intel MID DMA support for Peripheral DMA controllers"
-	depends on PCI && X86
-	select DMA_ENGINE
-	default n
-	help
-	  Enable support for the Intel(R) MID DMA engine present
-	  in Intel MID chipsets.
-
-	  Say Y here if you have such a chipset.
-
-	  If unsure, say N.
-
 config ASYNC_TX_ENABLE_CHANNEL_SWITCH
 	bool
 
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index bf44858..7e8301c 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -6,7 +6,6 @@ obj-$(CONFIG_DMA_VIRTUAL_CHANNELS) += virt-dma.o
 obj-$(CONFIG_DMA_ACPI) += acpi-dma.o
 obj-$(CONFIG_DMA_OF) += of-dma.o
 
-obj-$(CONFIG_INTEL_MID_DMAC) += intel_mid_dma.o
 obj-$(CONFIG_DMATEST) += dmatest.o
 obj-$(CONFIG_INTEL_IOATDMA) += ioat/
 obj-$(CONFIG_INTEL_IOP_ADMA) += iop-adma.o
diff --git a/drivers/dma/intel_mid_dma.c b/drivers/dma/intel_mid_dma.c
deleted file mode 100644
index 5aaead9..0000000
--- a/drivers/dma/intel_mid_dma.c
+++ /dev/null
@@ -1,1447 +0,0 @@
-/*
- *  intel_mid_dma.c - Intel Langwell DMA Drivers
- *
- *  Copyright (C) 2008-10 Intel Corp
- *  Author: Vinod Koul <vinod.koul-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
- *  The driver design is based on dw_dmac driver
- *  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; version 2 of the License.
- *
- *  This program is distributed in the hope that it will be useful, but
- *  WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- *  General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- *
- */
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/pm_runtime.h>
-#include <linux/intel_mid_dma.h>
-#include <linux/module.h>
-
-#include "dmaengine.h"
-
-#define MAX_CHAN	4 /*max ch across controllers*/
-#include "intel_mid_dma_regs.h"
-
-#define INTEL_MID_DMAC1_ID		0x0814
-#define INTEL_MID_DMAC2_ID		0x0813
-#define INTEL_MID_GP_DMAC2_ID		0x0827
-#define INTEL_MFLD_DMAC1_ID		0x0830
-#define LNW_PERIPHRAL_MASK_BASE		0xFFAE8008
-#define LNW_PERIPHRAL_MASK_SIZE		0x10
-#define LNW_PERIPHRAL_STATUS		0x0
-#define LNW_PERIPHRAL_MASK		0x8
-
-struct intel_mid_dma_probe_info {
-	u8 max_chan;
-	u8 ch_base;
-	u16 block_size;
-	u32 pimr_mask;
-};
-
-#define INFO(_max_chan, _ch_base, _block_size, _pimr_mask) \
-	((kernel_ulong_t)&(struct intel_mid_dma_probe_info) {	\
-		.max_chan = (_max_chan),			\
-		.ch_base = (_ch_base),				\
-		.block_size = (_block_size),			\
-		.pimr_mask = (_pimr_mask),			\
-	})
-
-/*****************************************************************************
-Utility Functions*/
-/**
- * get_ch_index	-	convert status to channel
- * @status: status mask
- * @base: dma ch base value
- *
- * Modify the status mask and return the channel index needing
- * attention (or -1 if neither)
- */
-static int get_ch_index(int *status, unsigned int base)
-{
-	int i;
-	for (i = 0; i < MAX_CHAN; i++) {
-		if (*status & (1 << (i + base))) {
-			*status = *status & ~(1 << (i + base));
-			pr_debug("MDMA: index %d New status %x\n", i, *status);
-			return i;
-		}
-	}
-	return -1;
-}
-
-/**
- * get_block_ts	-	calculates dma transaction length
- * @len: dma transfer length
- * @tx_width: dma transfer src width
- * @block_size: dma controller max block size
- *
- * Based on src width calculate the DMA trsaction length in data items
- * return data items or FFFF if exceeds max length for block
- */
-static int get_block_ts(int len, int tx_width, int block_size)
-{
-	int byte_width = 0, block_ts = 0;
-
-	switch (tx_width) {
-	case DMA_SLAVE_BUSWIDTH_1_BYTE:
-		byte_width = 1;
-		break;
-	case DMA_SLAVE_BUSWIDTH_2_BYTES:
-		byte_width = 2;
-		break;
-	case DMA_SLAVE_BUSWIDTH_4_BYTES:
-	default:
-		byte_width = 4;
-		break;
-	}
-
-	block_ts = len/byte_width;
-	if (block_ts > block_size)
-		block_ts = 0xFFFF;
-	return block_ts;
-}
-
-/*****************************************************************************
-DMAC1 interrupt Functions*/
-
-/**
- * dmac1_mask_periphral_intr -	mask the periphral interrupt
- * @mid: dma device for which masking is required
- *
- * Masks the DMA periphral interrupt
- * this is valid for DMAC1 family controllers only
- * This controller should have periphral mask registers already mapped
- */
-static void dmac1_mask_periphral_intr(struct middma_device *mid)
-{
-	u32 pimr;
-
-	if (mid->pimr_mask) {
-		pimr = readl(mid->mask_reg + LNW_PERIPHRAL_MASK);
-		pimr |= mid->pimr_mask;
-		writel(pimr, mid->mask_reg + LNW_PERIPHRAL_MASK);
-	}
-	return;
-}
-
-/**
- * dmac1_unmask_periphral_intr -	unmask the periphral interrupt
- * @midc: dma channel for which masking is required
- *
- * UnMasks the DMA periphral interrupt,
- * this is valid for DMAC1 family controllers only
- * This controller should have periphral mask registers already mapped
- */
-static void dmac1_unmask_periphral_intr(struct intel_mid_dma_chan *midc)
-{
-	u32 pimr;
-	struct middma_device *mid = to_middma_device(midc->chan.device);
-
-	if (mid->pimr_mask) {
-		pimr = readl(mid->mask_reg + LNW_PERIPHRAL_MASK);
-		pimr &= ~mid->pimr_mask;
-		writel(pimr, mid->mask_reg + LNW_PERIPHRAL_MASK);
-	}
-	return;
-}
-
-/**
- * enable_dma_interrupt -	enable the periphral interrupt
- * @midc: dma channel for which enable interrupt is required
- *
- * Enable the DMA periphral interrupt,
- * this is valid for DMAC1 family controllers only
- * This controller should have periphral mask registers already mapped
- */
-static void enable_dma_interrupt(struct intel_mid_dma_chan *midc)
-{
-	dmac1_unmask_periphral_intr(midc);
-
-	/*en ch interrupts*/
-	iowrite32(UNMASK_INTR_REG(midc->ch_id), midc->dma_base + MASK_TFR);
-	iowrite32(UNMASK_INTR_REG(midc->ch_id), midc->dma_base + MASK_ERR);
-	return;
-}
-
-/**
- * disable_dma_interrupt -	disable the periphral interrupt
- * @midc: dma channel for which disable interrupt is required
- *
- * Disable the DMA periphral interrupt,
- * this is valid for DMAC1 family controllers only
- * This controller should have periphral mask registers already mapped
- */
-static void disable_dma_interrupt(struct intel_mid_dma_chan *midc)
-{
-	/*Check LPE PISR, make sure fwd is disabled*/
-	iowrite32(MASK_INTR_REG(midc->ch_id), midc->dma_base + MASK_BLOCK);
-	iowrite32(MASK_INTR_REG(midc->ch_id), midc->dma_base + MASK_TFR);
-	iowrite32(MASK_INTR_REG(midc->ch_id), midc->dma_base + MASK_ERR);
-	return;
-}
-
-/*****************************************************************************
-DMA channel helper Functions*/
-/**
- * mid_desc_get		-	get a descriptor
- * @midc: dma channel for which descriptor is required
- *
- * Obtain a descriptor for the channel. Returns NULL if none are free.
- * Once the descriptor is returned it is private until put on another
- * list or freed
- */
-static struct intel_mid_dma_desc *midc_desc_get(struct intel_mid_dma_chan *midc)
-{
-	struct intel_mid_dma_desc *desc, *_desc;
-	struct intel_mid_dma_desc *ret = NULL;
-
-	spin_lock_bh(&midc->lock);
-	list_for_each_entry_safe(desc, _desc, &midc->free_list, desc_node) {
-		if (async_tx_test_ack(&desc->txd)) {
-			list_del(&desc->desc_node);
-			ret = desc;
-			break;
-		}
-	}
-	spin_unlock_bh(&midc->lock);
-	return ret;
-}
-
-/**
- * mid_desc_put		-	put a descriptor
- * @midc: dma channel for which descriptor is required
- * @desc: descriptor to put
- *
- * Return a descriptor from lwn_desc_get back to the free pool
- */
-static void midc_desc_put(struct intel_mid_dma_chan *midc,
-			struct intel_mid_dma_desc *desc)
-{
-	if (desc) {
-		spin_lock_bh(&midc->lock);
-		list_add_tail(&desc->desc_node, &midc->free_list);
-		spin_unlock_bh(&midc->lock);
-	}
-}
-/**
- * midc_dostart		-		begin a DMA transaction
- * @midc: channel for which txn is to be started
- * @first: first descriptor of series
- *
- * Load a transaction into the engine. This must be called with midc->lock
- * held and bh disabled.
- */
-static void midc_dostart(struct intel_mid_dma_chan *midc,
-			struct intel_mid_dma_desc *first)
-{
-	struct middma_device *mid = to_middma_device(midc->chan.device);
-
-	/*  channel is idle */
-	if (midc->busy && test_ch_en(midc->dma_base, midc->ch_id)) {
-		/*error*/
-		pr_err("ERR_MDMA: channel is busy in start\n");
-		/* The tasklet will hopefully advance the queue... */
-		return;
-	}
-	midc->busy = true;
-	/*write registers and en*/
-	iowrite32(first->sar, midc->ch_regs + SAR);
-	iowrite32(first->dar, midc->ch_regs + DAR);
-	iowrite32(first->lli_phys, midc->ch_regs + LLP);
-	iowrite32(first->cfg_hi, midc->ch_regs + CFG_HIGH);
-	iowrite32(first->cfg_lo, midc->ch_regs + CFG_LOW);
-	iowrite32(first->ctl_lo, midc->ch_regs + CTL_LOW);
-	iowrite32(first->ctl_hi, midc->ch_regs + CTL_HIGH);
-	pr_debug("MDMA:TX SAR %x,DAR %x,CFGL %x,CFGH %x,CTLH %x, CTLL %x\n",
-		(int)first->sar, (int)first->dar, first->cfg_hi,
-		first->cfg_lo, first->ctl_hi, first->ctl_lo);
-	first->status = DMA_IN_PROGRESS;
-
-	iowrite32(ENABLE_CHANNEL(midc->ch_id), mid->dma_base + DMA_CHAN_EN);
-}
-
-/**
- * midc_descriptor_complete	-	process completed descriptor
- * @midc: channel owning the descriptor
- * @desc: the descriptor itself
- *
- * Process a completed descriptor and perform any callbacks upon
- * the completion. The completion handling drops the lock during the
- * callbacks but must be called with the lock held.
- */
-static void midc_descriptor_complete(struct intel_mid_dma_chan *midc,
-		struct intel_mid_dma_desc *desc)
-		__releases(&midc->lock) __acquires(&midc->lock)
-{
-	struct dma_async_tx_descriptor	*txd = &desc->txd;
-	dma_async_tx_callback callback_txd = NULL;
-	struct intel_mid_dma_lli	*llitem;
-	void *param_txd = NULL;
-
-	dma_cookie_complete(txd);
-	callback_txd = txd->callback;
-	param_txd = txd->callback_param;
-
-	if (desc->lli != NULL) {
-		/*clear the DONE bit of completed LLI in memory*/
-		llitem = desc->lli + desc->current_lli;
-		llitem->ctl_hi &= CLEAR_DONE;
-		if (desc->current_lli < desc->lli_length-1)
-			(desc->current_lli)++;
-		else
-			desc->current_lli = 0;
-	}
-	spin_unlock_bh(&midc->lock);
-	if (callback_txd) {
-		pr_debug("MDMA: TXD callback set ... calling\n");
-		callback_txd(param_txd);
-	}
-	if (midc->raw_tfr) {
-		desc->status = DMA_COMPLETE;
-		if (desc->lli != NULL) {
-			pci_pool_free(desc->lli_pool, desc->lli,
-						desc->lli_phys);
-			pci_pool_destroy(desc->lli_pool);
-			desc->lli = NULL;
-		}
-		list_move(&desc->desc_node, &midc->free_list);
-		midc->busy = false;
-	}
-	spin_lock_bh(&midc->lock);
-
-}
-/**
- * midc_scan_descriptors -		check the descriptors in channel
- *					mark completed when tx is completete
- * @mid: device
- * @midc: channel to scan
- *
- * Walk the descriptor chain for the device and process any entries
- * that are complete.
- */
-static void midc_scan_descriptors(struct middma_device *mid,
-				struct intel_mid_dma_chan *midc)
-{
-	struct intel_mid_dma_desc *desc = NULL, *_desc = NULL;
-
-	/*tx is complete*/
-	list_for_each_entry_safe(desc, _desc, &midc->active_list, desc_node) {
-		if (desc->status == DMA_IN_PROGRESS)
-			midc_descriptor_complete(midc, desc);
-	}
-	return;
-	}
-/**
- * midc_lli_fill_sg -		Helper function to convert
- *				SG list to Linked List Items.
- *@midc: Channel
- *@desc: DMA descriptor
- *@sglist: Pointer to SG list
- *@sglen: SG list length
- *@flags: DMA transaction flags
- *
- * Walk through the SG list and convert the SG list into Linked
- * List Items (LLI).
- */
-static int midc_lli_fill_sg(struct intel_mid_dma_chan *midc,
-				struct intel_mid_dma_desc *desc,
-				struct scatterlist *sglist,
-				unsigned int sglen,
-				unsigned int flags)
-{
-	struct intel_mid_dma_slave *mids;
-	struct scatterlist  *sg;
-	dma_addr_t lli_next, sg_phy_addr;
-	struct intel_mid_dma_lli *lli_bloc_desc;
-	union intel_mid_dma_ctl_lo ctl_lo;
-	union intel_mid_dma_ctl_hi ctl_hi;
-	int i;
-
-	pr_debug("MDMA: Entered midc_lli_fill_sg\n");
-	mids = midc->mid_slave;
-
-	lli_bloc_desc = desc->lli;
-	lli_next = desc->lli_phys;
-
-	ctl_lo.ctl_lo = desc->ctl_lo;
-	ctl_hi.ctl_hi = desc->ctl_hi;
-	for_each_sg(sglist, sg, sglen, i) {
-		/*Populate CTL_LOW and LLI values*/
-		if (i != sglen - 1) {
-			lli_next = lli_next +
-				sizeof(struct intel_mid_dma_lli);
-		} else {
-		/*Check for circular list, otherwise terminate LLI to ZERO*/
-			if (flags & DMA_PREP_CIRCULAR_LIST) {
-				pr_debug("MDMA: LLI is configured in circular mode\n");
-				lli_next = desc->lli_phys;
-			} else {
-				lli_next = 0;
-				ctl_lo.ctlx.llp_dst_en = 0;
-				ctl_lo.ctlx.llp_src_en = 0;
-			}
-		}
-		/*Populate CTL_HI values*/
-		ctl_hi.ctlx.block_ts = get_block_ts(sg_dma_len(sg),
-							desc->width,
-							midc->dma->block_size);
-		/*Populate SAR and DAR values*/
-		sg_phy_addr = sg_dma_address(sg);
-		if (desc->dirn ==  DMA_MEM_TO_DEV) {
-			lli_bloc_desc->sar  = sg_phy_addr;
-			lli_bloc_desc->dar  = mids->dma_slave.dst_addr;
-		} else if (desc->dirn ==  DMA_DEV_TO_MEM) {
-			lli_bloc_desc->sar  = mids->dma_slave.src_addr;
-			lli_bloc_desc->dar  = sg_phy_addr;
-		}
-		/*Copy values into block descriptor in system memroy*/
-		lli_bloc_desc->llp = lli_next;
-		lli_bloc_desc->ctl_lo = ctl_lo.ctl_lo;
-		lli_bloc_desc->ctl_hi = ctl_hi.ctl_hi;
-
-		lli_bloc_desc++;
-	}
-	/*Copy very first LLI values to descriptor*/
-	desc->ctl_lo = desc->lli->ctl_lo;
-	desc->ctl_hi = desc->lli->ctl_hi;
-	desc->sar = desc->lli->sar;
-	desc->dar = desc->lli->dar;
-
-	return 0;
-}
-/*****************************************************************************
-DMA engine callback Functions*/
-/**
- * intel_mid_dma_tx_submit -	callback to submit DMA transaction
- * @tx: dma engine descriptor
- *
- * Submit the DMA transaction for this descriptor, start if ch idle
- */
-static dma_cookie_t intel_mid_dma_tx_submit(struct dma_async_tx_descriptor *tx)
-{
-	struct intel_mid_dma_desc	*desc = to_intel_mid_dma_desc(tx);
-	struct intel_mid_dma_chan	*midc = to_intel_mid_dma_chan(tx->chan);
-	dma_cookie_t		cookie;
-
-	spin_lock_bh(&midc->lock);
-	cookie = dma_cookie_assign(tx);
-
-	if (list_empty(&midc->active_list))
-		list_add_tail(&desc->desc_node, &midc->active_list);
-	else
-		list_add_tail(&desc->desc_node, &midc->queue);
-
-	midc_dostart(midc, desc);
-	spin_unlock_bh(&midc->lock);
-
-	return cookie;
-}
-
-/**
- * intel_mid_dma_issue_pending -	callback to issue pending txn
- * @chan: chan where pending trascation needs to be checked and submitted
- *
- * Call for scan to issue pending descriptors
- */
-static void intel_mid_dma_issue_pending(struct dma_chan *chan)
-{
-	struct intel_mid_dma_chan	*midc = to_intel_mid_dma_chan(chan);
-
-	spin_lock_bh(&midc->lock);
-	if (!list_empty(&midc->queue))
-		midc_scan_descriptors(to_middma_device(chan->device), midc);
-	spin_unlock_bh(&midc->lock);
-}
-
-/**
- * intel_mid_dma_tx_status -	Return status of txn
- * @chan: chan for where status needs to be checked
- * @cookie: cookie for txn
- * @txstate: DMA txn state
- *
- * Return status of DMA txn
- */
-static enum dma_status intel_mid_dma_tx_status(struct dma_chan *chan,
-						dma_cookie_t cookie,
-						struct dma_tx_state *txstate)
-{
-	struct intel_mid_dma_chan *midc = to_intel_mid_dma_chan(chan);
-	enum dma_status ret;
-
-	ret = dma_cookie_status(chan, cookie, txstate);
-	if (ret != DMA_COMPLETE) {
-		spin_lock_bh(&midc->lock);
-		midc_scan_descriptors(to_middma_device(chan->device), midc);
-		spin_unlock_bh(&midc->lock);
-
-		ret = dma_cookie_status(chan, cookie, txstate);
-	}
-
-	return ret;
-}
-
-static int intel_mid_dma_config(struct dma_chan *chan,
-				struct dma_slave_config *slave)
-{
-	struct intel_mid_dma_chan	*midc = to_intel_mid_dma_chan(chan);
-	struct intel_mid_dma_slave *mid_slave;
-
-	BUG_ON(!midc);
-	BUG_ON(!slave);
-	pr_debug("MDMA: slave control called\n");
-
-	mid_slave = to_intel_mid_dma_slave(slave);
-
-	BUG_ON(!mid_slave);
-
-	midc->mid_slave = mid_slave;
-	return 0;
-}
-
-static int intel_mid_dma_terminate_all(struct dma_chan *chan)
-{
-	struct intel_mid_dma_chan	*midc = to_intel_mid_dma_chan(chan);
-	struct middma_device	*mid = to_middma_device(chan->device);
-	struct intel_mid_dma_desc	*desc, *_desc;
-	union intel_mid_dma_cfg_lo cfg_lo;
-
-	spin_lock_bh(&midc->lock);
-	if (midc->busy == false) {
-		spin_unlock_bh(&midc->lock);
-		return 0;
-	}
-	/*Suspend and disable the channel*/
-	cfg_lo.cfg_lo = ioread32(midc->ch_regs + CFG_LOW);
-	cfg_lo.cfgx.ch_susp = 1;
-	iowrite32(cfg_lo.cfg_lo, midc->ch_regs + CFG_LOW);
-	iowrite32(DISABLE_CHANNEL(midc->ch_id), mid->dma_base + DMA_CHAN_EN);
-	midc->busy = false;
-	/* Disable interrupts */
-	disable_dma_interrupt(midc);
-	midc->descs_allocated = 0;
-
-	spin_unlock_bh(&midc->lock);
-	list_for_each_entry_safe(desc, _desc, &midc->active_list, desc_node) {
-		if (desc->lli != NULL) {
-			pci_pool_free(desc->lli_pool, desc->lli,
-						desc->lli_phys);
-			pci_pool_destroy(desc->lli_pool);
-			desc->lli = NULL;
-		}
-		list_move(&desc->desc_node, &midc->free_list);
-	}
-	return 0;
-}
-
-
-/**
- * intel_mid_dma_prep_memcpy -	Prep memcpy txn
- * @chan: chan for DMA transfer
- * @dest: destn address
- * @src: src address
- * @len: DMA transfer len
- * @flags: DMA flags
- *
- * Perform a DMA memcpy. Note we support slave periphral DMA transfers only
- * The periphral txn details should be filled in slave structure properly
- * Returns the descriptor for this txn
- */
-static struct dma_async_tx_descriptor *intel_mid_dma_prep_memcpy(
-			struct dma_chan *chan, dma_addr_t dest,
-			dma_addr_t src, size_t len, unsigned long flags)
-{
-	struct intel_mid_dma_chan *midc;
-	struct intel_mid_dma_desc *desc = NULL;
-	struct intel_mid_dma_slave *mids;
-	union intel_mid_dma_ctl_lo ctl_lo;
-	union intel_mid_dma_ctl_hi ctl_hi;
-	union intel_mid_dma_cfg_lo cfg_lo;
-	union intel_mid_dma_cfg_hi cfg_hi;
-	enum dma_slave_buswidth width;
-
-	pr_debug("MDMA: Prep for memcpy\n");
-	BUG_ON(!chan);
-	if (!len)
-		return NULL;
-
-	midc = to_intel_mid_dma_chan(chan);
-	BUG_ON(!midc);
-
-	mids = midc->mid_slave;
-	BUG_ON(!mids);
-
-	pr_debug("MDMA:called for DMA %x CH %d Length %zu\n",
-				midc->dma->pci_id, midc->ch_id, len);
-	pr_debug("MDMA:Cfg passed Mode %x, Dirn %x, HS %x, Width %x\n",
-			mids->cfg_mode, mids->dma_slave.direction,
-			mids->hs_mode, mids->dma_slave.src_addr_width);
-
-	/*calculate CFG_LO*/
-	if (mids->hs_mode == LNW_DMA_SW_HS) {
-		cfg_lo.cfg_lo = 0;
-		cfg_lo.cfgx.hs_sel_dst = 1;
-		cfg_lo.cfgx.hs_sel_src = 1;
-	} else if (mids->hs_mode == LNW_DMA_HW_HS)
-		cfg_lo.cfg_lo = 0x00000;
-
-	/*calculate CFG_HI*/
-	if (mids->cfg_mode == LNW_DMA_MEM_TO_MEM) {
-		/*SW HS only*/
-		cfg_hi.cfg_hi = 0;
-	} else {
-		cfg_hi.cfg_hi = 0;
-		if (midc->dma->pimr_mask) {
-			cfg_hi.cfgx.protctl = 0x0; /*default value*/
-			cfg_hi.cfgx.fifo_mode = 1;
-			if (mids->dma_slave.direction == DMA_MEM_TO_DEV) {
-				cfg_hi.cfgx.src_per = 0;
-				if (mids->device_instance == 0)
-					cfg_hi.cfgx.dst_per = 3;
-				if (mids->device_instance == 1)
-					cfg_hi.cfgx.dst_per = 1;
-			} else if (mids->dma_slave.direction == DMA_DEV_TO_MEM) {
-				if (mids->device_instance == 0)
-					cfg_hi.cfgx.src_per = 2;
-				if (mids->device_instance == 1)
-					cfg_hi.cfgx.src_per = 0;
-				cfg_hi.cfgx.dst_per = 0;
-			}
-		} else {
-			cfg_hi.cfgx.protctl = 0x1; /*default value*/
-			cfg_hi.cfgx.src_per = cfg_hi.cfgx.dst_per =
-					midc->ch_id - midc->dma->chan_base;
-		}
-	}
-
-	/*calculate CTL_HI*/
-	ctl_hi.ctlx.reser = 0;
-	ctl_hi.ctlx.done  = 0;
-	width = mids->dma_slave.src_addr_width;
-
-	ctl_hi.ctlx.block_ts = get_block_ts(len, width, midc->dma->block_size);
-	pr_debug("MDMA:calc len %d for block size %d\n",
-				ctl_hi.ctlx.block_ts, midc->dma->block_size);
-	/*calculate CTL_LO*/
-	ctl_lo.ctl_lo = 0;
-	ctl_lo.ctlx.int_en = 1;
-	ctl_lo.ctlx.dst_msize = mids->dma_slave.src_maxburst;
-	ctl_lo.ctlx.src_msize = mids->dma_slave.dst_maxburst;
-
-	/*
-	 * Here we need some translation from "enum dma_slave_buswidth"
-	 * to the format for our dma controller
-	 *		standard	intel_mid_dmac's format
-	 *		 1 Byte			0b000
-	 *		 2 Bytes		0b001
-	 *		 4 Bytes		0b010
-	 */
-	ctl_lo.ctlx.dst_tr_width = mids->dma_slave.dst_addr_width / 2;
-	ctl_lo.ctlx.src_tr_width = mids->dma_slave.src_addr_width / 2;
-
-	if (mids->cfg_mode == LNW_DMA_MEM_TO_MEM) {
-		ctl_lo.ctlx.tt_fc = 0;
-		ctl_lo.ctlx.sinc = 0;
-		ctl_lo.ctlx.dinc = 0;
-	} else {
-		if (mids->dma_slave.direction == DMA_MEM_TO_DEV) {
-			ctl_lo.ctlx.sinc = 0;
-			ctl_lo.ctlx.dinc = 2;
-			ctl_lo.ctlx.tt_fc = 1;
-		} else if (mids->dma_slave.direction == DMA_DEV_TO_MEM) {
-			ctl_lo.ctlx.sinc = 2;
-			ctl_lo.ctlx.dinc = 0;
-			ctl_lo.ctlx.tt_fc = 2;
-		}
-	}
-
-	pr_debug("MDMA:Calc CTL LO %x, CTL HI %x, CFG LO %x, CFG HI %x\n",
-		ctl_lo.ctl_lo, ctl_hi.ctl_hi, cfg_lo.cfg_lo, cfg_hi.cfg_hi);
-
-	enable_dma_interrupt(midc);
-
-	desc = midc_desc_get(midc);
-	if (desc == NULL)
-		goto err_desc_get;
-	desc->sar = src;
-	desc->dar = dest ;
-	desc->len = len;
-	desc->cfg_hi = cfg_hi.cfg_hi;
-	desc->cfg_lo = cfg_lo.cfg_lo;
-	desc->ctl_lo = ctl_lo.ctl_lo;
-	desc->ctl_hi = ctl_hi.ctl_hi;
-	desc->width = width;
-	desc->dirn = mids->dma_slave.direction;
-	desc->lli_phys = 0;
-	desc->lli = NULL;
-	desc->lli_pool = NULL;
-	return &desc->txd;
-
-err_desc_get:
-	pr_err("ERR_MDMA: Failed to get desc\n");
-	midc_desc_put(midc, desc);
-	return NULL;
-}
-/**
- * intel_mid_dma_prep_slave_sg -	Prep slave sg txn
- * @chan: chan for DMA transfer
- * @sgl: scatter gather list
- * @sg_len: length of sg txn
- * @direction: DMA transfer dirtn
- * @flags: DMA flags
- * @context: transfer context (ignored)
- *
- * Prepares LLI based periphral transfer
- */
-static struct dma_async_tx_descriptor *intel_mid_dma_prep_slave_sg(
-			struct dma_chan *chan, struct scatterlist *sgl,
-			unsigned int sg_len, enum dma_transfer_direction direction,
-			unsigned long flags, void *context)
-{
-	struct intel_mid_dma_chan *midc = NULL;
-	struct intel_mid_dma_slave *mids = NULL;
-	struct intel_mid_dma_desc *desc = NULL;
-	struct dma_async_tx_descriptor *txd = NULL;
-	union intel_mid_dma_ctl_lo ctl_lo;
-
-	pr_debug("MDMA: Prep for slave SG\n");
-
-	if (!sg_len) {
-		pr_err("MDMA: Invalid SG length\n");
-		return NULL;
-	}
-	midc = to_intel_mid_dma_chan(chan);
-	BUG_ON(!midc);
-
-	mids = midc->mid_slave;
-	BUG_ON(!mids);
-
-	if (!midc->dma->pimr_mask) {
-		/* We can still handle sg list with only one item */
-		if (sg_len == 1) {
-			txd = intel_mid_dma_prep_memcpy(chan,
-						mids->dma_slave.dst_addr,
-						mids->dma_slave.src_addr,
-						sg_dma_len(sgl),
-						flags);
-			return txd;
-		} else {
-			pr_warn("MDMA: SG list is not supported by this controller\n");
-			return  NULL;
-		}
-	}
-
-	pr_debug("MDMA: SG Length = %d, direction = %d, Flags = %#lx\n",
-			sg_len, direction, flags);
-
-	txd = intel_mid_dma_prep_memcpy(chan, 0, 0, sg_dma_len(sgl), flags);
-	if (NULL == txd) {
-		pr_err("MDMA: Prep memcpy failed\n");
-		return NULL;
-	}
-
-	desc = to_intel_mid_dma_desc(txd);
-	desc->dirn = direction;
-	ctl_lo.ctl_lo = desc->ctl_lo;
-	ctl_lo.ctlx.llp_dst_en = 1;
-	ctl_lo.ctlx.llp_src_en = 1;
-	desc->ctl_lo = ctl_lo.ctl_lo;
-	desc->lli_length = sg_len;
-	desc->current_lli = 0;
-	/* DMA coherent memory pool for LLI descriptors*/
-	desc->lli_pool = pci_pool_create("intel_mid_dma_lli_pool",
-				midc->dma->pdev,
-				(sizeof(struct intel_mid_dma_lli)*sg_len),
-				32, 0);
-	if (NULL == desc->lli_pool) {
-		pr_err("MID_DMA:LLI pool create failed\n");
-		return NULL;
-	}
-
-	desc->lli = pci_pool_alloc(desc->lli_pool, GFP_KERNEL, &desc->lli_phys);
-	if (!desc->lli) {
-		pr_err("MID_DMA: LLI alloc failed\n");
-		pci_pool_destroy(desc->lli_pool);
-		return NULL;
-	}
-
-	midc_lli_fill_sg(midc, desc, sgl, sg_len, flags);
-	if (flags & DMA_PREP_INTERRUPT) {
-		iowrite32(UNMASK_INTR_REG(midc->ch_id),
-				midc->dma_base + MASK_BLOCK);
-		pr_debug("MDMA:Enabled Block interrupt\n");
-	}
-	return &desc->txd;
-}
-
-/**
- * intel_mid_dma_free_chan_resources -	Frees dma resources
- * @chan: chan requiring attention
- *
- * Frees the allocated resources on this DMA chan
- */
-static void intel_mid_dma_free_chan_resources(struct dma_chan *chan)
-{
-	struct intel_mid_dma_chan	*midc = to_intel_mid_dma_chan(chan);
-	struct middma_device	*mid = to_middma_device(chan->device);
-	struct intel_mid_dma_desc	*desc, *_desc;
-
-	if (true == midc->busy) {
-		/*trying to free ch in use!!!!!*/
-		pr_err("ERR_MDMA: trying to free ch in use\n");
-	}
-	spin_lock_bh(&midc->lock);
-	midc->descs_allocated = 0;
-	list_for_each_entry_safe(desc, _desc, &midc->active_list, desc_node) {
-		list_del(&desc->desc_node);
-		pci_pool_free(mid->dma_pool, desc, desc->txd.phys);
-	}
-	list_for_each_entry_safe(desc, _desc, &midc->free_list, desc_node) {
-		list_del(&desc->desc_node);
-		pci_pool_free(mid->dma_pool, desc, desc->txd.phys);
-	}
-	list_for_each_entry_safe(desc, _desc, &midc->queue, desc_node) {
-		list_del(&desc->desc_node);
-		pci_pool_free(mid->dma_pool, desc, desc->txd.phys);
-	}
-	spin_unlock_bh(&midc->lock);
-	midc->in_use = false;
-	midc->busy = false;
-	/* Disable CH interrupts */
-	iowrite32(MASK_INTR_REG(midc->ch_id), mid->dma_base + MASK_BLOCK);
-	iowrite32(MASK_INTR_REG(midc->ch_id), mid->dma_base + MASK_ERR);
-	pm_runtime_put(&mid->pdev->dev);
-}
-
-/**
- * intel_mid_dma_alloc_chan_resources -	Allocate dma resources
- * @chan: chan requiring attention
- *
- * Allocates DMA resources on this chan
- * Return the descriptors allocated
- */
-static int intel_mid_dma_alloc_chan_resources(struct dma_chan *chan)
-{
-	struct intel_mid_dma_chan	*midc = to_intel_mid_dma_chan(chan);
-	struct middma_device	*mid = to_middma_device(chan->device);
-	struct intel_mid_dma_desc	*desc;
-	dma_addr_t		phys;
-	int	i = 0;
-
-	pm_runtime_get_sync(&mid->pdev->dev);
-
-	if (mid->state == SUSPENDED) {
-		if (dma_resume(&mid->pdev->dev)) {
-			pr_err("ERR_MDMA: resume failed");
-			return -EFAULT;
-		}
-	}
-
-	/* ASSERT:  channel is idle */
-	if (test_ch_en(mid->dma_base, midc->ch_id)) {
-		/*ch is not idle*/
-		pr_err("ERR_MDMA: ch not idle\n");
-		pm_runtime_put(&mid->pdev->dev);
-		return -EIO;
-	}
-	dma_cookie_init(chan);
-
-	spin_lock_bh(&midc->lock);
-	while (midc->descs_allocated < DESCS_PER_CHANNEL) {
-		spin_unlock_bh(&midc->lock);
-		desc = pci_pool_alloc(mid->dma_pool, GFP_KERNEL, &phys);
-		if (!desc) {
-			pr_err("ERR_MDMA: desc failed\n");
-			pm_runtime_put(&mid->pdev->dev);
-			return -ENOMEM;
-			/*check*/
-		}
-		dma_async_tx_descriptor_init(&desc->txd, chan);
-		desc->txd.tx_submit = intel_mid_dma_tx_submit;
-		desc->txd.flags = DMA_CTRL_ACK;
-		desc->txd.phys = phys;
-		spin_lock_bh(&midc->lock);
-		i = ++midc->descs_allocated;
-		list_add_tail(&desc->desc_node, &midc->free_list);
-	}
-	spin_unlock_bh(&midc->lock);
-	midc->in_use = true;
-	midc->busy = false;
-	pr_debug("MID_DMA: Desc alloc done ret: %d desc\n", i);
-	return i;
-}
-
-/**
- * midc_handle_error -	Handle DMA txn error
- * @mid: controller where error occurred
- * @midc: chan where error occurred
- *
- * Scan the descriptor for error
- */
-static void midc_handle_error(struct middma_device *mid,
-		struct intel_mid_dma_chan *midc)
-{
-	midc_scan_descriptors(mid, midc);
-}
-
-/**
- * dma_tasklet -	DMA interrupt tasklet
- * @data: tasklet arg (the controller structure)
- *
- * Scan the controller for interrupts for completion/error
- * Clear the interrupt and call for handling completion/error
- */
-static void dma_tasklet(unsigned long data)
-{
-	struct middma_device *mid = NULL;
-	struct intel_mid_dma_chan *midc = NULL;
-	u32 status, raw_tfr, raw_block;
-	int i;
-
-	mid = (struct middma_device *)data;
-	if (mid == NULL) {
-		pr_err("ERR_MDMA: tasklet Null param\n");
-		return;
-	}
-	pr_debug("MDMA: in tasklet for device %x\n", mid->pci_id);
-	raw_tfr = ioread32(mid->dma_base + RAW_TFR);
-	raw_block = ioread32(mid->dma_base + RAW_BLOCK);
-	status = raw_tfr | raw_block;
-	status &= mid->intr_mask;
-	while (status) {
-		/*txn interrupt*/
-		i = get_ch_index(&status, mid->chan_base);
-		if (i < 0) {
-			pr_err("ERR_MDMA:Invalid ch index %x\n", i);
-			return;
-		}
-		midc = &mid->ch[i];
-		if (midc == NULL) {
-			pr_err("ERR_MDMA:Null param midc\n");
-			return;
-		}
-		pr_debug("MDMA:Tx complete interrupt %x, Ch No %d Index %d\n",
-				status, midc->ch_id, i);
-		midc->raw_tfr = raw_tfr;
-		midc->raw_block = raw_block;
-		spin_lock_bh(&midc->lock);
-		/*clearing this interrupts first*/
-		iowrite32((1 << midc->ch_id), mid->dma_base + CLEAR_TFR);
-		if (raw_block) {
-			iowrite32((1 << midc->ch_id),
-				mid->dma_base + CLEAR_BLOCK);
-		}
-		midc_scan_descriptors(mid, midc);
-		pr_debug("MDMA:Scan of desc... complete, unmasking\n");
-		iowrite32(UNMASK_INTR_REG(midc->ch_id),
-				mid->dma_base + MASK_TFR);
-		if (raw_block) {
-			iowrite32(UNMASK_INTR_REG(midc->ch_id),
-				mid->dma_base + MASK_BLOCK);
-		}
-		spin_unlock_bh(&midc->lock);
-	}
-
-	status = ioread32(mid->dma_base + RAW_ERR);
-	status &= mid->intr_mask;
-	while (status) {
-		/*err interrupt*/
-		i = get_ch_index(&status, mid->chan_base);
-		if (i < 0) {
-			pr_err("ERR_MDMA:Invalid ch index %x\n", i);
-			return;
-		}
-		midc = &mid->ch[i];
-		if (midc == NULL) {
-			pr_err("ERR_MDMA:Null param midc\n");
-			return;
-		}
-		pr_debug("MDMA:Tx complete interrupt %x, Ch No %d Index %d\n",
-				status, midc->ch_id, i);
-
-		iowrite32((1 << midc->ch_id), mid->dma_base + CLEAR_ERR);
-		spin_lock_bh(&midc->lock);
-		midc_handle_error(mid, midc);
-		iowrite32(UNMASK_INTR_REG(midc->ch_id),
-				mid->dma_base + MASK_ERR);
-		spin_unlock_bh(&midc->lock);
-	}
-	pr_debug("MDMA:Exiting takslet...\n");
-	return;
-}
-
-static void dma_tasklet1(unsigned long data)
-{
-	pr_debug("MDMA:in takslet1...\n");
-	return dma_tasklet(data);
-}
-
-static void dma_tasklet2(unsigned long data)
-{
-	pr_debug("MDMA:in takslet2...\n");
-	return dma_tasklet(data);
-}
-
-/**
- * intel_mid_dma_interrupt -	DMA ISR
- * @irq: IRQ where interrupt occurred
- * @data: ISR cllback data (the controller structure)
- *
- * See if this is our interrupt if so then schedule the tasklet
- * otherwise ignore
- */
-static irqreturn_t intel_mid_dma_interrupt(int irq, void *data)
-{
-	struct middma_device *mid = data;
-	u32 tfr_status, err_status;
-	int call_tasklet = 0;
-
-	tfr_status = ioread32(mid->dma_base + RAW_TFR);
-	err_status = ioread32(mid->dma_base + RAW_ERR);
-	if (!tfr_status && !err_status)
-		return IRQ_NONE;
-
-	/*DMA Interrupt*/
-	pr_debug("MDMA:Got an interrupt on irq %d\n", irq);
-	pr_debug("MDMA: Status %x, Mask %x\n", tfr_status, mid->intr_mask);
-	tfr_status &= mid->intr_mask;
-	if (tfr_status) {
-		/*need to disable intr*/
-		iowrite32((tfr_status << INT_MASK_WE), mid->dma_base + MASK_TFR);
-		iowrite32((tfr_status << INT_MASK_WE), mid->dma_base + MASK_BLOCK);
-		pr_debug("MDMA: Calling tasklet %x\n", tfr_status);
-		call_tasklet = 1;
-	}
-	err_status &= mid->intr_mask;
-	if (err_status) {
-		iowrite32((err_status << INT_MASK_WE),
-			  mid->dma_base + MASK_ERR);
-		call_tasklet = 1;
-	}
-	if (call_tasklet)
-		tasklet_schedule(&mid->tasklet);
-
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t intel_mid_dma_interrupt1(int irq, void *data)
-{
-	return intel_mid_dma_interrupt(irq, data);
-}
-
-static irqreturn_t intel_mid_dma_interrupt2(int irq, void *data)
-{
-	return intel_mid_dma_interrupt(irq, data);
-}
-
-/**
- * mid_setup_dma -	Setup the DMA controller
- * @pdev: Controller PCI device structure
- *
- * Initialize the DMA controller, channels, registers with DMA engine,
- * ISR. Initialize DMA controller channels.
- */
-static int mid_setup_dma(struct pci_dev *pdev)
-{
-	struct middma_device *dma = pci_get_drvdata(pdev);
-	int err, i;
-
-	/* DMA coherent memory pool for DMA descriptor allocations */
-	dma->dma_pool = pci_pool_create("intel_mid_dma_desc_pool", pdev,
-					sizeof(struct intel_mid_dma_desc),
-					32, 0);
-	if (NULL == dma->dma_pool) {
-		pr_err("ERR_MDMA:pci_pool_create failed\n");
-		err = -ENOMEM;
-		goto err_dma_pool;
-	}
-
-	INIT_LIST_HEAD(&dma->common.channels);
-	dma->pci_id = pdev->device;
-	if (dma->pimr_mask) {
-		dma->mask_reg = ioremap(LNW_PERIPHRAL_MASK_BASE,
-					LNW_PERIPHRAL_MASK_SIZE);
-		if (dma->mask_reg == NULL) {
-			pr_err("ERR_MDMA:Can't map periphral intr space !!\n");
-			err = -ENOMEM;
-			goto err_ioremap;
-		}
-	} else
-		dma->mask_reg = NULL;
-
-	pr_debug("MDMA:Adding %d channel for this controller\n", dma->max_chan);
-	/*init CH structures*/
-	dma->intr_mask = 0;
-	dma->state = RUNNING;
-	for (i = 0; i < dma->max_chan; i++) {
-		struct intel_mid_dma_chan *midch = &dma->ch[i];
-
-		midch->chan.device = &dma->common;
-		dma_cookie_init(&midch->chan);
-		midch->ch_id = dma->chan_base + i;
-		pr_debug("MDMA:Init CH %d, ID %d\n", i, midch->ch_id);
-
-		midch->dma_base = dma->dma_base;
-		midch->ch_regs = dma->dma_base + DMA_CH_SIZE * midch->ch_id;
-		midch->dma = dma;
-		dma->intr_mask |= 1 << (dma->chan_base + i);
-		spin_lock_init(&midch->lock);
-
-		INIT_LIST_HEAD(&midch->active_list);
-		INIT_LIST_HEAD(&midch->queue);
-		INIT_LIST_HEAD(&midch->free_list);
-		/*mask interrupts*/
-		iowrite32(MASK_INTR_REG(midch->ch_id),
-			dma->dma_base + MASK_BLOCK);
-		iowrite32(MASK_INTR_REG(midch->ch_id),
-			dma->dma_base + MASK_SRC_TRAN);
-		iowrite32(MASK_INTR_REG(midch->ch_id),
-			dma->dma_base + MASK_DST_TRAN);
-		iowrite32(MASK_INTR_REG(midch->ch_id),
-			dma->dma_base + MASK_ERR);
-		iowrite32(MASK_INTR_REG(midch->ch_id),
-			dma->dma_base + MASK_TFR);
-
-		disable_dma_interrupt(midch);
-		list_add_tail(&midch->chan.device_node, &dma->common.channels);
-	}
-	pr_debug("MDMA: Calc Mask as %x for this controller\n", dma->intr_mask);
-
-	/*init dma structure*/
-	dma_cap_zero(dma->common.cap_mask);
-	dma_cap_set(DMA_MEMCPY, dma->common.cap_mask);
-	dma_cap_set(DMA_SLAVE, dma->common.cap_mask);
-	dma_cap_set(DMA_PRIVATE, dma->common.cap_mask);
-	dma->common.dev = &pdev->dev;
-
-	dma->common.device_alloc_chan_resources =
-					intel_mid_dma_alloc_chan_resources;
-	dma->common.device_free_chan_resources =
-					intel_mid_dma_free_chan_resources;
-
-	dma->common.device_tx_status = intel_mid_dma_tx_status;
-	dma->common.device_prep_dma_memcpy = intel_mid_dma_prep_memcpy;
-	dma->common.device_issue_pending = intel_mid_dma_issue_pending;
-	dma->common.device_prep_slave_sg = intel_mid_dma_prep_slave_sg;
-	dma->common.device_config = intel_mid_dma_config;
-	dma->common.device_terminate_all = intel_mid_dma_terminate_all;
-
-	/*enable dma cntrl*/
-	iowrite32(REG_BIT0, dma->dma_base + DMA_CFG);
-
-	/*register irq */
-	if (dma->pimr_mask) {
-		pr_debug("MDMA:Requesting irq shared for DMAC1\n");
-		err = request_irq(pdev->irq, intel_mid_dma_interrupt1,
-			IRQF_SHARED, "INTEL_MID_DMAC1", dma);
-		if (0 != err)
-			goto err_irq;
-	} else {
-		dma->intr_mask = 0x03;
-		pr_debug("MDMA:Requesting irq for DMAC2\n");
-		err = request_irq(pdev->irq, intel_mid_dma_interrupt2,
-			IRQF_SHARED, "INTEL_MID_DMAC2", dma);
-		if (0 != err)
-			goto err_irq;
-	}
-	/*register device w/ engine*/
-	err = dma_async_device_register(&dma->common);
-	if (0 != err) {
-		pr_err("ERR_MDMA:device_register failed: %d\n", err);
-		goto err_engine;
-	}
-	if (dma->pimr_mask) {
-		pr_debug("setting up tasklet1 for DMAC1\n");
-		tasklet_init(&dma->tasklet, dma_tasklet1, (unsigned long)dma);
-	} else {
-		pr_debug("setting up tasklet2 for DMAC2\n");
-		tasklet_init(&dma->tasklet, dma_tasklet2, (unsigned long)dma);
-	}
-	return 0;
-
-err_engine:
-	free_irq(pdev->irq, dma);
-err_irq:
-	if (dma->mask_reg)
-		iounmap(dma->mask_reg);
-err_ioremap:
-	pci_pool_destroy(dma->dma_pool);
-err_dma_pool:
-	pr_err("ERR_MDMA:setup_dma failed: %d\n", err);
-	return err;
-
-}
-
-/**
- * middma_shutdown -	Shutdown the DMA controller
- * @pdev: Controller PCI device structure
- *
- * Called by remove
- * Unregister DMa controller, clear all structures and free interrupt
- */
-static void middma_shutdown(struct pci_dev *pdev)
-{
-	struct middma_device *device = pci_get_drvdata(pdev);
-
-	dma_async_device_unregister(&device->common);
-	pci_pool_destroy(device->dma_pool);
-	if (device->mask_reg)
-		iounmap(device->mask_reg);
-	if (device->dma_base)
-		iounmap(device->dma_base);
-	free_irq(pdev->irq, device);
-	return;
-}
-
-/**
- * intel_mid_dma_probe -	PCI Probe
- * @pdev: Controller PCI device structure
- * @id: pci device id structure
- *
- * Initialize the PCI device, map BARs, query driver data.
- * Call setup_dma to complete contoller and chan initilzation
- */
-static int intel_mid_dma_probe(struct pci_dev *pdev,
-					const struct pci_device_id *id)
-{
-	struct middma_device *device;
-	u32 base_addr, bar_size;
-	struct intel_mid_dma_probe_info *info;
-	int err;
-
-	pr_debug("MDMA: probe for %x\n", pdev->device);
-	info = (void *)id->driver_data;
-	pr_debug("MDMA: CH %d, base %d, block len %d, Periphral mask %x\n",
-				info->max_chan, info->ch_base,
-				info->block_size, info->pimr_mask);
-
-	err = pci_enable_device(pdev);
-	if (err)
-		goto err_enable_device;
-
-	err = pci_request_regions(pdev, "intel_mid_dmac");
-	if (err)
-		goto err_request_regions;
-
-	err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
-	if (err)
-		goto err_set_dma_mask;
-
-	err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
-	if (err)
-		goto err_set_dma_mask;
-
-	device = kzalloc(sizeof(*device), GFP_KERNEL);
-	if (!device) {
-		pr_err("ERR_MDMA:kzalloc failed probe\n");
-		err = -ENOMEM;
-		goto err_kzalloc;
-	}
-	device->pdev = pci_dev_get(pdev);
-
-	base_addr = pci_resource_start(pdev, 0);
-	bar_size  = pci_resource_len(pdev, 0);
-	device->dma_base = ioremap_nocache(base_addr, DMA_REG_SIZE);
-	if (!device->dma_base) {
-		pr_err("ERR_MDMA:ioremap failed\n");
-		err = -ENOMEM;
-		goto err_ioremap;
-	}
-	pci_set_drvdata(pdev, device);
-	pci_set_master(pdev);
-	device->max_chan = info->max_chan;
-	device->chan_base = info->ch_base;
-	device->block_size = info->block_size;
-	device->pimr_mask = info->pimr_mask;
-
-	err = mid_setup_dma(pdev);
-	if (err)
-		goto err_dma;
-
-	pm_runtime_put_noidle(&pdev->dev);
-	pm_runtime_allow(&pdev->dev);
-	return 0;
-
-err_dma:
-	iounmap(device->dma_base);
-err_ioremap:
-	pci_dev_put(pdev);
-	kfree(device);
-err_kzalloc:
-err_set_dma_mask:
-	pci_release_regions(pdev);
-	pci_disable_device(pdev);
-err_request_regions:
-err_enable_device:
-	pr_err("ERR_MDMA:Probe failed %d\n", err);
-	return err;
-}
-
-/**
- * intel_mid_dma_remove -	PCI remove
- * @pdev: Controller PCI device structure
- *
- * Free up all resources and data
- * Call shutdown_dma to complete contoller and chan cleanup
- */
-static void intel_mid_dma_remove(struct pci_dev *pdev)
-{
-	struct middma_device *device = pci_get_drvdata(pdev);
-
-	pm_runtime_get_noresume(&pdev->dev);
-	pm_runtime_forbid(&pdev->dev);
-	middma_shutdown(pdev);
-	pci_dev_put(pdev);
-	kfree(device);
-	pci_release_regions(pdev);
-	pci_disable_device(pdev);
-}
-
-/* Power Management */
-/*
-* dma_suspend - PCI suspend function
-*
-* @pci: PCI device structure
-* @state: PM message
-*
-* This function is called by OS when a power event occurs
-*/
-static int dma_suspend(struct device *dev)
-{
-	struct pci_dev *pci = to_pci_dev(dev);
-	int i;
-	struct middma_device *device = pci_get_drvdata(pci);
-	pr_debug("MDMA: dma_suspend called\n");
-
-	for (i = 0; i < device->max_chan; i++) {
-		if (device->ch[i].in_use)
-			return -EAGAIN;
-	}
-	dmac1_mask_periphral_intr(device);
-	device->state = SUSPENDED;
-	pci_save_state(pci);
-	pci_disable_device(pci);
-	pci_set_power_state(pci, PCI_D3hot);
-	return 0;
-}
-
-/**
-* dma_resume - PCI resume function
-*
-* @pci:	PCI device structure
-*
-* This function is called by OS when a power event occurs
-*/
-int dma_resume(struct device *dev)
-{
-	struct pci_dev *pci = to_pci_dev(dev);
-	int ret;
-	struct middma_device *device = pci_get_drvdata(pci);
-
-	pr_debug("MDMA: dma_resume called\n");
-	pci_set_power_state(pci, PCI_D0);
-	pci_restore_state(pci);
-	ret = pci_enable_device(pci);
-	if (ret) {
-		pr_err("MDMA: device can't be enabled for %x\n", pci->device);
-		return ret;
-	}
-	device->state = RUNNING;
-	iowrite32(REG_BIT0, device->dma_base + DMA_CFG);
-	return 0;
-}
-
-static int dma_runtime_suspend(struct device *dev)
-{
-	struct pci_dev *pci_dev = to_pci_dev(dev);
-	struct middma_device *device = pci_get_drvdata(pci_dev);
-
-	device->state = SUSPENDED;
-	return 0;
-}
-
-static int dma_runtime_resume(struct device *dev)
-{
-	struct pci_dev *pci_dev = to_pci_dev(dev);
-	struct middma_device *device = pci_get_drvdata(pci_dev);
-
-	device->state = RUNNING;
-	iowrite32(REG_BIT0, device->dma_base + DMA_CFG);
-	return 0;
-}
-
-static int dma_runtime_idle(struct device *dev)
-{
-	struct pci_dev *pdev = to_pci_dev(dev);
-	struct middma_device *device = pci_get_drvdata(pdev);
-	int i;
-
-	for (i = 0; i < device->max_chan; i++) {
-		if (device->ch[i].in_use)
-			return -EAGAIN;
-	}
-
-	return 0;
-}
-
-/******************************************************************************
-* PCI stuff
-*/
-static struct pci_device_id intel_mid_dma_ids[] = {
-	{ PCI_VDEVICE(INTEL, INTEL_MID_DMAC1_ID),	INFO(2, 6, 4095, 0x200020)},
-	{ PCI_VDEVICE(INTEL, INTEL_MID_DMAC2_ID),	INFO(2, 0, 2047, 0)},
-	{ PCI_VDEVICE(INTEL, INTEL_MID_GP_DMAC2_ID),	INFO(2, 0, 2047, 0)},
-	{ PCI_VDEVICE(INTEL, INTEL_MFLD_DMAC1_ID),	INFO(4, 0, 4095, 0x400040)},
-	{ 0, }
-};
-MODULE_DEVICE_TABLE(pci, intel_mid_dma_ids);
-
-static const struct dev_pm_ops intel_mid_dma_pm = {
-	.runtime_suspend = dma_runtime_suspend,
-	.runtime_resume = dma_runtime_resume,
-	.runtime_idle = dma_runtime_idle,
-	.suspend = dma_suspend,
-	.resume = dma_resume,
-};
-
-static struct pci_driver intel_mid_dma_pci_driver = {
-	.name		=	"Intel MID DMA",
-	.id_table	=	intel_mid_dma_ids,
-	.probe		=	intel_mid_dma_probe,
-	.remove		=	intel_mid_dma_remove,
-#ifdef CONFIG_PM
-	.driver = {
-		.pm = &intel_mid_dma_pm,
-	},
-#endif
-};
-
-static int __init intel_mid_dma_init(void)
-{
-	pr_debug("INFO_MDMA: LNW DMA Driver Version %s\n",
-			INTEL_MID_DMA_DRIVER_VERSION);
-	return pci_register_driver(&intel_mid_dma_pci_driver);
-}
-fs_initcall(intel_mid_dma_init);
-
-static void __exit intel_mid_dma_exit(void)
-{
-	pci_unregister_driver(&intel_mid_dma_pci_driver);
-}
-module_exit(intel_mid_dma_exit);
-
-MODULE_AUTHOR("Vinod Koul <vinod.koul-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>");
-MODULE_DESCRIPTION("Intel (R) MID DMAC Driver");
-MODULE_LICENSE("GPL v2");
-MODULE_VERSION(INTEL_MID_DMA_DRIVER_VERSION);
diff --git a/drivers/dma/intel_mid_dma_regs.h b/drivers/dma/intel_mid_dma_regs.h
deleted file mode 100644
index 17b4219..0000000
--- a/drivers/dma/intel_mid_dma_regs.h
+++ /dev/null
@@ -1,299 +0,0 @@
-/*
- *  intel_mid_dma_regs.h - Intel MID DMA Drivers
- *
- *  Copyright (C) 2008-10 Intel Corp
- *  Author: Vinod Koul <vinod.koul-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
- *  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; version 2 of the License.
- *
- *  This program is distributed in the hope that it will be useful, but
- *  WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- *  General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- *
- */
-#ifndef __INTEL_MID_DMAC_REGS_H__
-#define __INTEL_MID_DMAC_REGS_H__
-
-#include <linux/dmaengine.h>
-#include <linux/dmapool.h>
-#include <linux/pci_ids.h>
-
-#define INTEL_MID_DMA_DRIVER_VERSION "1.1.0"
-
-#define	REG_BIT0		0x00000001
-#define	REG_BIT8		0x00000100
-#define INT_MASK_WE		0x8
-#define CLEAR_DONE		0xFFFFEFFF
-#define UNMASK_INTR_REG(chan_num) \
-	((REG_BIT0 << chan_num) | (REG_BIT8 << chan_num))
-#define MASK_INTR_REG(chan_num) (REG_BIT8 << chan_num)
-
-#define ENABLE_CHANNEL(chan_num) \
-	((REG_BIT0 << chan_num) | (REG_BIT8 << chan_num))
-
-#define DISABLE_CHANNEL(chan_num) \
-	(REG_BIT8 << chan_num)
-
-#define DESCS_PER_CHANNEL	16
-/*DMA Registers*/
-/*registers associated with channel programming*/
-#define DMA_REG_SIZE		0x400
-#define DMA_CH_SIZE		0x58
-
-/*CH X REG = (DMA_CH_SIZE)*CH_NO + REG*/
-#define SAR			0x00 /* Source Address Register*/
-#define DAR			0x08 /* Destination Address Register*/
-#define LLP			0x10 /* Linked List Pointer Register*/
-#define CTL_LOW			0x18 /* Control Register*/
-#define CTL_HIGH		0x1C /* Control Register*/
-#define CFG_LOW			0x40 /* Configuration Register Low*/
-#define CFG_HIGH		0x44 /* Configuration Register high*/
-
-#define STATUS_TFR		0x2E8
-#define STATUS_BLOCK		0x2F0
-#define STATUS_ERR		0x308
-
-#define RAW_TFR			0x2C0
-#define RAW_BLOCK		0x2C8
-#define RAW_ERR			0x2E0
-
-#define MASK_TFR		0x310
-#define MASK_BLOCK		0x318
-#define MASK_SRC_TRAN		0x320
-#define MASK_DST_TRAN		0x328
-#define MASK_ERR		0x330
-
-#define CLEAR_TFR		0x338
-#define CLEAR_BLOCK		0x340
-#define CLEAR_SRC_TRAN		0x348
-#define CLEAR_DST_TRAN		0x350
-#define CLEAR_ERR		0x358
-
-#define INTR_STATUS		0x360
-#define DMA_CFG			0x398
-#define DMA_CHAN_EN		0x3A0
-
-/*DMA channel control registers*/
-union intel_mid_dma_ctl_lo {
-	struct {
-		u32	int_en:1;	/*enable or disable interrupts*/
-					/*should be 0*/
-		u32	dst_tr_width:3;	/*destination transfer width*/
-					/*usually 32 bits = 010*/
-		u32	src_tr_width:3; /*source transfer width*/
-					/*usually 32 bits = 010*/
-		u32	dinc:2;		/*destination address inc/dec*/
-					/*For mem:INC=00, Periphral NoINC=11*/
-		u32	sinc:2;		/*source address inc or dec, as above*/
-		u32	dst_msize:3;	/*destination burst transaction length*/
-					/*always = 16 ie 011*/
-		u32	src_msize:3;	/*source burst transaction length*/
-					/*always = 16 ie 011*/
-		u32	reser1:3;
-		u32	tt_fc:3;	/*transfer type and flow controller*/
-					/*M-M = 000
-					  P-M = 010
-					  M-P = 001*/
-		u32	dms:2;		/*destination master select = 0*/
-		u32	sms:2;		/*source master select = 0*/
-		u32	llp_dst_en:1;	/*enable/disable destination LLP = 0*/
-		u32	llp_src_en:1;	/*enable/disable source LLP = 0*/
-		u32	reser2:3;
-	} ctlx;
-	u32	ctl_lo;
-};
-
-union intel_mid_dma_ctl_hi {
-	struct {
-		u32	block_ts:12;	/*block transfer size*/
-		u32	done:1;		/*Done - updated by DMAC*/
-		u32	reser:19;	/*configured by DMAC*/
-	} ctlx;
-	u32	ctl_hi;
-
-};
-
-/*DMA channel configuration registers*/
-union intel_mid_dma_cfg_lo {
-	struct {
-		u32	reser1:5;
-		u32	ch_prior:3;	/*channel priority = 0*/
-		u32	ch_susp:1;	/*channel suspend = 0*/
-		u32	fifo_empty:1;	/*FIFO empty or not R bit = 0*/
-		u32	hs_sel_dst:1;	/*select HW/SW destn handshaking*/
-					/*HW = 0, SW = 1*/
-		u32	hs_sel_src:1;	/*select HW/SW src handshaking*/
-		u32	reser2:6;
-		u32	dst_hs_pol:1;	/*dest HS interface polarity*/
-		u32	src_hs_pol:1;	/*src HS interface polarity*/
-		u32	max_abrst:10;	/*max AMBA burst len = 0 (no sw limit*/
-		u32	reload_src:1;	/*auto reload src addr =1 if src is P*/
-		u32	reload_dst:1;	/*AR destn addr =1 if dstn is P*/
-	} cfgx;
-	u32	cfg_lo;
-};
-
-union intel_mid_dma_cfg_hi {
-	struct {
-		u32	fcmode:1;	/*flow control mode = 1*/
-		u32	fifo_mode:1;	/*FIFO mode select = 1*/
-		u32	protctl:3;	/*protection control = 0*/
-		u32	rsvd:2;
-		u32	src_per:4;	/*src hw HS interface*/
-		u32	dst_per:4;	/*dstn hw HS interface*/
-		u32	reser2:17;
-	} cfgx;
-	u32	cfg_hi;
-};
-
-
-/**
- * struct intel_mid_dma_chan - internal mid representation of a DMA channel
- * @chan: dma_chan strcture represetation for mid chan
- * @ch_regs: MMIO register space pointer to channel register
- * @dma_base: MMIO register space DMA engine base pointer
- * @ch_id: DMA channel id
- * @lock: channel spinlock
- * @active_list: current active descriptors
- * @queue: current queued up descriptors
- * @free_list: current free descriptors
- * @slave: dma slave structure
- * @descs_allocated: total number of descriptors allocated
- * @dma: dma device structure pointer
- * @busy: bool representing if ch is busy (active txn) or not
- * @in_use: bool representing if ch is in use or not
- * @raw_tfr: raw trf interrupt received
- * @raw_block: raw block interrupt received
- */
-struct intel_mid_dma_chan {
-	struct dma_chan		chan;
-	void __iomem		*ch_regs;
-	void __iomem		*dma_base;
-	int			ch_id;
-	spinlock_t		lock;
-	struct list_head	active_list;
-	struct list_head	queue;
-	struct list_head	free_list;
-	unsigned int		descs_allocated;
-	struct middma_device	*dma;
-	bool			busy;
-	bool			in_use;
-	u32			raw_tfr;
-	u32			raw_block;
-	struct intel_mid_dma_slave *mid_slave;
-};
-
-static inline struct intel_mid_dma_chan *to_intel_mid_dma_chan(
-						struct dma_chan *chan)
-{
-	return container_of(chan, struct intel_mid_dma_chan, chan);
-}
-
-enum intel_mid_dma_state {
-	RUNNING = 0,
-	SUSPENDED,
-};
-/**
- * struct middma_device - internal representation of a DMA device
- * @pdev: PCI device
- * @dma_base: MMIO register space pointer of DMA
- * @dma_pool: for allocating DMA descriptors
- * @common: embedded struct dma_device
- * @tasklet: dma tasklet for processing interrupts
- * @ch: per channel data
- * @pci_id: DMA device PCI ID
- * @intr_mask: Interrupt mask to be used
- * @mask_reg: MMIO register for periphral mask
- * @chan_base: Base ch index (read from driver data)
- * @max_chan: max number of chs supported (from drv_data)
- * @block_size: Block size of DMA transfer supported (from drv_data)
- * @pimr_mask: MMIO register addr for periphral interrupt (from drv_data)
- * @state: dma PM device state
- */
-struct middma_device {
-	struct pci_dev		*pdev;
-	void __iomem		*dma_base;
-	struct pci_pool		*dma_pool;
-	struct dma_device	common;
-	struct tasklet_struct   tasklet;
-	struct intel_mid_dma_chan ch[MAX_CHAN];
-	unsigned int		pci_id;
-	unsigned int		intr_mask;
-	void __iomem		*mask_reg;
-	int			chan_base;
-	int			max_chan;
-	int			block_size;
-	unsigned int		pimr_mask;
-	enum intel_mid_dma_state state;
-};
-
-static inline struct middma_device *to_middma_device(struct dma_device *common)
-{
-	return container_of(common, struct middma_device, common);
-}
-
-struct intel_mid_dma_desc {
-	void __iomem			*block; /*ch ptr*/
-	struct list_head		desc_node;
-	struct dma_async_tx_descriptor	txd;
-	size_t				len;
-	dma_addr_t			sar;
-	dma_addr_t			dar;
-	u32				cfg_hi;
-	u32				cfg_lo;
-	u32				ctl_lo;
-	u32				ctl_hi;
-	struct pci_pool			*lli_pool;
-	struct intel_mid_dma_lli	*lli;
-	dma_addr_t			lli_phys;
-	unsigned int			lli_length;
-	unsigned int			current_lli;
-	dma_addr_t			next;
-	enum dma_transfer_direction		dirn;
-	enum dma_status			status;
-	enum dma_slave_buswidth		width; /*width of DMA txn*/
-	enum intel_mid_dma_mode		cfg_mode; /*mode configuration*/
-
-};
-
-struct intel_mid_dma_lli {
-	dma_addr_t			sar;
-	dma_addr_t			dar;
-	dma_addr_t			llp;
-	u32				ctl_lo;
-	u32				ctl_hi;
-} __attribute__ ((packed));
-
-static inline int test_ch_en(void __iomem *dma, u32 ch_no)
-{
-	u32 en_reg = ioread32(dma + DMA_CHAN_EN);
-	return (en_reg >> ch_no) & 0x1;
-}
-
-static inline struct intel_mid_dma_desc *to_intel_mid_dma_desc
-		(struct dma_async_tx_descriptor *txd)
-{
-	return container_of(txd, struct intel_mid_dma_desc, txd);
-}
-
-static inline struct intel_mid_dma_slave *to_intel_mid_dma_slave
-		(struct dma_slave_config *slave)
-{
-	return container_of(slave, struct intel_mid_dma_slave, dma_slave);
-}
-
-
-int dma_resume(struct device *dev);
-
-#endif /*__INTEL_MID_DMAC_REGS_H__*/
diff --git a/include/linux/intel_mid_dma.h b/include/linux/intel_mid_dma.h
deleted file mode 100644
index 10496bd..0000000
--- a/include/linux/intel_mid_dma.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- *  intel_mid_dma.h - Intel MID DMA Drivers
- *
- *  Copyright (C) 2008-10 Intel Corp
- *  Author: Vinod Koul <vinod.koul-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
- *  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; version 2 of the License.
- *
- *  This program is distributed in the hope that it will be useful, but
- *  WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- *  General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- *
- */
-#ifndef __INTEL_MID_DMA_H__
-#define __INTEL_MID_DMA_H__
-
-#include <linux/dmaengine.h>
-
-#define DMA_PREP_CIRCULAR_LIST		(1 << 10)
-
-/*DMA mode configurations*/
-enum intel_mid_dma_mode {
-	LNW_DMA_PER_TO_MEM = 0, /*periphral to memory configuration*/
-	LNW_DMA_MEM_TO_PER,	/*memory to periphral configuration*/
-	LNW_DMA_MEM_TO_MEM,	/*mem to mem confg (testing only)*/
-};
-
-/*DMA handshaking*/
-enum intel_mid_dma_hs_mode {
-	LNW_DMA_HW_HS = 0,	/*HW Handshaking only*/
-	LNW_DMA_SW_HS = 1,	/*SW Handshaking not recommended*/
-};
-
-/*Burst size configuration*/
-enum intel_mid_dma_msize {
-	LNW_DMA_MSIZE_1 = 0x0,
-	LNW_DMA_MSIZE_4 = 0x1,
-	LNW_DMA_MSIZE_8 = 0x2,
-	LNW_DMA_MSIZE_16 = 0x3,
-	LNW_DMA_MSIZE_32 = 0x4,
-	LNW_DMA_MSIZE_64 = 0x5,
-};
-
-/**
- * struct intel_mid_dma_slave - DMA slave structure
- *
- * @dirn: DMA trf direction
- * @src_width: tx register width
- * @dst_width: rx register width
- * @hs_mode: HW/SW handshaking mode
- * @cfg_mode: DMA data transfer mode (per-per/mem-per/mem-mem)
- * @src_msize: Source DMA burst size
- * @dst_msize: Dst DMA burst size
- * @per_addr: Periphral address
- * @device_instance: DMA peripheral device instance, we can have multiple
- *		peripheral device connected to single DMAC
- */
-struct intel_mid_dma_slave {
-	enum intel_mid_dma_hs_mode	hs_mode;  /*handshaking*/
-	enum intel_mid_dma_mode		cfg_mode; /*mode configuration*/
-	unsigned int		device_instance; /*0, 1 for periphral instance*/
-	struct dma_slave_config		dma_slave;
-};
-
-#endif /*__INTEL_MID_DMA_H__*/
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v3 7/7] dmaengine: intel-mid-dma: remove the driver

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 657 bytes --]

On Mon, Mar 09, 2015 at 04:48:51PM +0200, Andy Shevchenko wrote:
> Since the last and the only user of this driver is converted to use dw_dmac we
> can remove driver from the tree.
> 
> Moreover, besides the driver is unmaintained a long time, it serves for the
> DesignWare DMA IP, for which we have already driver in the tree.
> 
> Cc: Vinod Koul <vinod.koul-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
> Cc: dmaengine-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> Signed-off-by: Andy Shevchenko <andriy.shevchenko-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>

Applied everything except this one, thanks.  I'm OK with applying this
if Vinod is - Vinod?

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 473 bytes --]

Re: [PATCH v3 7/7] dmaengine: intel-mid-dma: remove the driver

[Vinod Koul]

[-- Attachment #1: Type: text/plain, Size: 893 bytes --]

On Mon, Mar 09, 2015 at 06:11:51PM +0000, Mark Brown wrote:
> On Mon, Mar 09, 2015 at 04:48:51PM +0200, Andy Shevchenko wrote:
> > Since the last and the only user of this driver is converted to use dw_dmac we
> > can remove driver from the tree.
> > 
> > Moreover, besides the driver is unmaintained a long time, it serves for the
> > DesignWare DMA IP, for which we have already driver in the tree.
> > 
> > Cc: Vinod Koul <vinod.koul-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
> > Cc: dmaengine-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> > Signed-off-by: Andy Shevchenko <andriy.shevchenko-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
> 
> Applied everything except this one, thanks.  I'm OK with applying this
> if Vinod is - Vinod?
yes I think it is right time to do so :)

So:

Acked-by: Vinod Koul <vinod.koul-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>

Thanks
-- 
~Vinod

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

Re: [PATCH v3 7/7] dmaengine: intel-mid-dma: remove the driver

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 199 bytes --]

On Mon, Mar 09, 2015 at 04:48:51PM +0200, Andy Shevchenko wrote:
> Since the last and the only user of this driver is converted to use dw_dmac we
> can remove driver from the tree.

Applied, thanks.

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 473 bytes --]