linux-spi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jarkko Nikula <jarkko.nikula-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
To: linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Jarkko Nikula
	<jarkko.nikula-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
Subject: [PATCHv2 1/3] spi: pxa2xx: Differentiate Intel LPSS types
Date: Thu,  4 Jun 2015 16:55:10 +0300	[thread overview]
Message-ID: <1433426112-19021-1-git-send-email-jarkko.nikula@linux.intel.com> (raw)

Intel LPSS SPI properties differ between between platforms. Now private
registers offset 0x400 or 0x800 is autodetected but there is need to
support also other offset and handle a few other differences.

Prepare for that by splitting the LPSS_SSP type into compatible hardware
types and set it now based on PCI or ACPI ID. That type will be used to set
properties that differ between current and upcoming platforms.

Signed-off-by: Jarkko Nikula <jarkko.nikula-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
---
 drivers/spi/spi-pxa2xx-pci.c |  8 ++++----
 drivers/spi/spi-pxa2xx.c     | 44 ++++++++++++++++++++++++++++++--------------
 include/linux/pxa2xx_ssp.h   |  3 ++-
 3 files changed, 36 insertions(+), 19 deletions(-)

diff --git a/drivers/spi/spi-pxa2xx-pci.c b/drivers/spi/spi-pxa2xx-pci.c
index fa7399e84bbb..3cfd4357489a 100644
--- a/drivers/spi/spi-pxa2xx-pci.c
+++ b/drivers/spi/spi-pxa2xx-pci.c
@@ -62,7 +62,7 @@ static struct pxa_spi_info spi_info_configs[] = {
 		.max_clk_rate = 3686400,
 	},
 	[PORT_BYT] = {
-		.type = LPSS_SSP,
+		.type = LPSS_BYT_SSP,
 		.port_id = 0,
 		.num_chipselect = 1,
 		.max_clk_rate = 50000000,
@@ -70,7 +70,7 @@ static struct pxa_spi_info spi_info_configs[] = {
 		.rx_param = &byt_rx_param,
 	},
 	[PORT_BSW0] = {
-		.type = LPSS_SSP,
+		.type = LPSS_BYT_SSP,
 		.port_id = 0,
 		.num_chipselect = 1,
 		.max_clk_rate = 50000000,
@@ -78,7 +78,7 @@ static struct pxa_spi_info spi_info_configs[] = {
 		.rx_param = &bsw0_rx_param,
 	},
 	[PORT_BSW1] = {
-		.type = LPSS_SSP,
+		.type = LPSS_BYT_SSP,
 		.port_id = 1,
 		.num_chipselect = 1,
 		.max_clk_rate = 50000000,
@@ -86,7 +86,7 @@ static struct pxa_spi_info spi_info_configs[] = {
 		.rx_param = &bsw1_rx_param,
 	},
 	[PORT_BSW2] = {
-		.type = LPSS_SSP,
+		.type = LPSS_BYT_SSP,
 		.port_id = 2,
 		.num_chipselect = 1,
 		.max_clk_rate = 50000000,
diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index e3223ac75a7c..a85b7496a3cd 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -74,7 +74,13 @@ MODULE_ALIAS("platform:pxa2xx-spi");
 
 static bool is_lpss_ssp(const struct driver_data *drv_data)
 {
-	return drv_data->ssp_type == LPSS_SSP;
+	switch (drv_data->ssp_type) {
+	case LPSS_LPT_SSP:
+	case LPSS_BYT_SSP:
+		return true;
+	default:
+		return false;
+	}
 }
 
 static bool is_quark_x1000_ssp(const struct driver_data *drv_data)
@@ -1085,7 +1091,8 @@ static int setup(struct spi_device *spi)
 		tx_hi_thres = 0;
 		rx_thres = RX_THRESH_QUARK_X1000_DFLT;
 		break;
-	case LPSS_SSP:
+	case LPSS_LPT_SSP:
+	case LPSS_BYT_SSP:
 		tx_thres = LPSS_TX_LOTHRESH_DFLT;
 		tx_hi_thres = LPSS_TX_HITHRESH_DFLT;
 		rx_thres = LPSS_RX_THRESH_DFLT;
@@ -1242,6 +1249,18 @@ static void cleanup(struct spi_device *spi)
 }
 
 #ifdef CONFIG_ACPI
+
+static struct acpi_device_id pxa2xx_spi_acpi_match[] = {
+	{ "INT33C0", LPSS_LPT_SSP },
+	{ "INT33C1", LPSS_LPT_SSP },
+	{ "INT3430", LPSS_LPT_SSP },
+	{ "INT3431", LPSS_LPT_SSP },
+	{ "80860F0E", LPSS_BYT_SSP },
+	{ "8086228E", LPSS_BYT_SSP },
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, pxa2xx_spi_acpi_match);
+
 static struct pxa2xx_spi_master *
 pxa2xx_spi_acpi_get_pdata(struct platform_device *pdev)
 {
@@ -1249,12 +1268,19 @@ pxa2xx_spi_acpi_get_pdata(struct platform_device *pdev)
 	struct acpi_device *adev;
 	struct ssp_device *ssp;
 	struct resource *res;
-	int devid;
+	const struct acpi_device_id *id;
+	int devid, type;
 
 	if (!ACPI_HANDLE(&pdev->dev) ||
 	    acpi_bus_get_device(ACPI_HANDLE(&pdev->dev), &adev))
 		return NULL;
 
+	id = acpi_match_device(pdev->dev.driver->acpi_match_table, &pdev->dev);
+	if (id)
+		type = (int)id->driver_data;
+	else
+		return NULL;
+
 	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
 	if (!pdata)
 		return NULL;
@@ -1272,7 +1298,7 @@ pxa2xx_spi_acpi_get_pdata(struct platform_device *pdev)
 
 	ssp->clk = devm_clk_get(&pdev->dev, NULL);
 	ssp->irq = platform_get_irq(pdev, 0);
-	ssp->type = LPSS_SSP;
+	ssp->type = type;
 	ssp->pdev = pdev;
 
 	ssp->port_id = -1;
@@ -1285,16 +1311,6 @@ pxa2xx_spi_acpi_get_pdata(struct platform_device *pdev)
 	return pdata;
 }
 
-static struct acpi_device_id pxa2xx_spi_acpi_match[] = {
-	{ "INT33C0", 0 },
-	{ "INT33C1", 0 },
-	{ "INT3430", 0 },
-	{ "INT3431", 0 },
-	{ "80860F0E", 0 },
-	{ "8086228E", 0 },
-	{ },
-};
-MODULE_DEVICE_TABLE(acpi, pxa2xx_spi_acpi_match);
 #else
 static inline struct pxa2xx_spi_master *
 pxa2xx_spi_acpi_get_pdata(struct platform_device *pdev)
diff --git a/include/linux/pxa2xx_ssp.h b/include/linux/pxa2xx_ssp.h
index dab545bb66b3..95a4b3bd7a5c 100644
--- a/include/linux/pxa2xx_ssp.h
+++ b/include/linux/pxa2xx_ssp.h
@@ -194,8 +194,9 @@ enum pxa_ssp_type {
 	PXA168_SSP,
 	PXA910_SSP,
 	CE4100_SSP,
-	LPSS_SSP,
 	QUARK_X1000_SSP,
+	LPSS_LPT_SSP,
+	LPSS_BYT_SSP,
 };
 
 struct ssp_device {
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

             reply	other threads:[~2015-06-04 13:55 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-04 13:55 Jarkko Nikula [this message]
     [not found] ` <1433426112-19021-1-git-send-email-jarkko.nikula-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2015-06-04 13:55   ` [PATCHv2 2/3] spi: pxa2xx: Prepare for new Intel LPSS SPI type Jarkko Nikula
2015-06-04 13:55   ` [PATCHv2 3/3] spi: pxa2xx: Make LPSS SPI general register optional Jarkko Nikula
2015-06-05 10:40   ` [PATCHv2 1/3] spi: pxa2xx: Differentiate Intel LPSS types Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1433426112-19021-1-git-send-email-jarkko.nikula@linux.intel.com \
    --to=jarkko.nikula-vuqaysv1563yd54fqh9/ca@public.gmane.org \
    --cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).