From: Franklin S Cooper Jr <fcooper-l0cyMroinI0@public.gmane.org>
To: <linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Cc: <linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>,
<linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
<devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
Franklin S Cooper Jr <fcooper-l0cyMroinI0@public.gmane.org>
Subject: [PATCH 2/4] spi: davinci: Choose correct pre-scaler limit based on SOC
Date: Tue, 14 Jul 2015 14:45:25 -0500 [thread overview]
Message-ID: <1436903127-6777-3-git-send-email-fcooper@ti.com> (raw)
In-Reply-To: <1436903127-6777-1-git-send-email-fcooper-l0cyMroinI0@public.gmane.org>
Currently the pre-scaler limit is incorrect. The value differs slightly
for various devices so a single value can't be used. Using the compatible
field select the correct pre-scaler limit.
Add new compatible field value for Keystone devices to support their
unique pre-scaler limit value.
Signed-off-by: Franklin S Cooper Jr <fcooper-l0cyMroinI0@public.gmane.org>
---
.../devicetree/bindings/spi/spi-davinci.txt | 2 +
drivers/spi/spi-davinci.c | 43 ++++++++++++++++++----
include/linux/platform_data/spi-davinci.h | 1 +
3 files changed, 39 insertions(+), 7 deletions(-)
diff --git a/Documentation/devicetree/bindings/spi/spi-davinci.txt b/Documentation/devicetree/bindings/spi/spi-davinci.txt
index 12ecfe9..d1e914a 100644
--- a/Documentation/devicetree/bindings/spi/spi-davinci.txt
+++ b/Documentation/devicetree/bindings/spi/spi-davinci.txt
@@ -12,6 +12,8 @@ Required properties:
- compatible:
- "ti,dm6441-spi" for SPI used similar to that on DM644x SoC family
- "ti,da830-spi" for SPI used similar to that on DA8xx SoC family
+ - "ti,keystone-spi" for SPI used similar to that on Keystone2 SoC
+ family
- reg: Offset and length of SPI controller register space
- num-cs: Number of chip selects. This includes internal as well as
GPIO chip selects.
diff --git a/drivers/spi/spi-davinci.c b/drivers/spi/spi-davinci.c
index b4605c4..3cf9faa 100644
--- a/drivers/spi/spi-davinci.c
+++ b/drivers/spi/spi-davinci.c
@@ -139,6 +139,8 @@ struct davinci_spi {
u32 (*get_tx)(struct davinci_spi *);
u8 *bytes_per_word;
+
+ u8 prescaler_limit;
};
static struct davinci_spi_config davinci_spi_default_cfg;
@@ -266,7 +268,7 @@ static inline int davinci_spi_get_prescale(struct davinci_spi *dspi,
/* Subtract 1 to match what will be programmed into SPI register. */
ret = DIV_ROUND_UP(clk_get_rate(dspi->clk), max_speed_hz) - 1;
- if (ret < 0 || ret > 255)
+ if (ret < dspi->prescaler_limit || ret > 255)
return -EINVAL;
return ret;
@@ -833,13 +835,40 @@ rx_dma_failed:
}
#if defined(CONFIG_OF)
+
+/* OF SPI data structure */
+struct davinci_spi_of_data {
+ u8 version;
+ u8 prescaler_limit;
+};
+
+static const struct davinci_spi_of_data dm6441_spi_data = {
+ .version = SPI_VERSION_1,
+ .prescaler_limit = 2,
+};
+
+static const struct davinci_spi_of_data da830_spi_data = {
+ .version = SPI_VERSION_2,
+ .prescaler_limit = 2,
+};
+
+static const struct davinci_spi_of_data keystone_spi_data = {
+ .version = SPI_VERSION_1,
+ .prescaler_limit = 0,
+};
+
static const struct of_device_id davinci_spi_of_match[] = {
{
.compatible = "ti,dm6441-spi",
+ .data = &dm6441_spi_data,
},
{
.compatible = "ti,da830-spi",
- .data = (void *)SPI_VERSION_2,
+ .data = &da830_spi_data,
+ },
+ {
+ .compatible = "ti,keystone-spi",
+ .data = &keystone_spi_data,
},
{ },
};
@@ -858,21 +887,21 @@ static int spi_davinci_get_pdata(struct platform_device *pdev,
struct davinci_spi *dspi)
{
struct device_node *node = pdev->dev.of_node;
+ struct davinci_spi_of_data *spi_data;
struct davinci_spi_platform_data *pdata;
unsigned int num_cs, intr_line = 0;
const struct of_device_id *match;
pdata = &dspi->pdata;
- pdata->version = SPI_VERSION_1;
match = of_match_device(davinci_spi_of_match, &pdev->dev);
if (!match)
return -ENODEV;
- /* match data has the SPI version number for SPI_VERSION_2 */
- if (match->data == (void *)SPI_VERSION_2)
- pdata->version = SPI_VERSION_2;
+ spi_data = (struct davinci_spi_of_data *)match->data;
+ pdata->version = spi_data->version;
+ pdata->prescaler_limit = spi_data->prescaler_limit;
/*
* default num_cs is 1 and all chipsel are internal to the chip
* indicated by chip_sel being NULL or cs_gpios being NULL or
@@ -992,7 +1021,7 @@ static int davinci_spi_probe(struct platform_device *pdev)
dspi->bitbang.chipselect = davinci_spi_chipselect;
dspi->bitbang.setup_transfer = davinci_spi_setup_transfer;
-
+ dspi->prescaler_limit = pdata->prescaler_limit;
dspi->version = pdata->version;
dspi->bitbang.flags = SPI_NO_CS | SPI_LSB_FIRST | SPI_LOOP;
diff --git a/include/linux/platform_data/spi-davinci.h b/include/linux/platform_data/spi-davinci.h
index 8dc2fa47..f4edcb0 100644
--- a/include/linux/platform_data/spi-davinci.h
+++ b/include/linux/platform_data/spi-davinci.h
@@ -49,6 +49,7 @@ struct davinci_spi_platform_data {
u8 num_chipselect;
u8 intr_line;
u8 *chip_sel;
+ u8 prescaler_limit;
bool cshold_bug;
enum dma_event_q dma_event_q;
};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-07-14 19:45 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-14 19:45 [PATCH 0/4] spi: davinci: Improve prescaler limit support Franklin S Cooper Jr
[not found] ` <1436903127-6777-1-git-send-email-fcooper-l0cyMroinI0@public.gmane.org>
2015-07-14 19:45 ` [PATCH 1/4] spi: davinci: Set prescale value based on register value Franklin S Cooper Jr
[not found] ` <1436903127-6777-2-git-send-email-fcooper-l0cyMroinI0@public.gmane.org>
2015-07-24 17:29 ` Applied "spi: davinci: Set prescale value based on register value" to the spi tree Mark Brown
2015-07-14 19:45 ` Franklin S Cooper Jr [this message]
[not found] ` <1436903127-6777-3-git-send-email-fcooper-l0cyMroinI0@public.gmane.org>
2015-07-24 17:29 ` Applied "spi: davinci: Choose correct pre-scaler limit based on SOC" " Mark Brown
2015-07-14 19:45 ` [PATCH 3/4] ARM: davinci: Set proper SPI prescale limit value Franklin S Cooper Jr
[not found] ` <1436903127-6777-4-git-send-email-fcooper-l0cyMroinI0@public.gmane.org>
2015-08-15 16:22 ` Applied "ARM: davinci: Set proper SPI prescale limit value" to the spi tree Mark Brown
2015-07-14 19:45 ` [PATCH 4/4] ARM: dts: keystone: Add ti,keystone-spi for SPI Franklin S Cooper Jr
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1436903127-6777-3-git-send-email-fcooper@ti.com \
--to=fcooper-l0cymroini0@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).