From: Lars Persson <lars.persson-VrBV9hrLPhE@public.gmane.org>
To: linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
m.grzeschik-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org
Cc: Lars Persson <larper-VrBV9hrLPhE@public.gmane.org>
Subject: [PATCH] Revert "spi: bitbang: only toggle bitchanges"
Date: Fri, 24 Jul 2015 07:37:16 +0200 [thread overview]
Message-ID: <1437716236-12715-1-git-send-email-larper@axis.com> (raw)
This reverts commit 232a5adc5199 ("spi: bitbang: only toggle
bitchanges") because it breaks bitbanged SPI on our MIPS system. I
found two problems with the patch:
- oldbit must initially be computed from bit position 7, 15 or 31 of
word depending on the value of bits.
- The optimization also does not eliminate consecutive ones because
the compare of 1<<31 and 1 will be false (a bool only takes values 0
or 1).
Signed-off-by: Lars Persson <larper-VrBV9hrLPhE@public.gmane.org>
---
drivers/spi/spi-bitbang-txrx.h | 18 ++++--------------
1 file changed, 4 insertions(+), 14 deletions(-)
diff --git a/drivers/spi/spi-bitbang-txrx.h b/drivers/spi/spi-bitbang-txrx.h
index 06b34e5..c616e41 100644
--- a/drivers/spi/spi-bitbang-txrx.h
+++ b/drivers/spi/spi-bitbang-txrx.h
@@ -49,17 +49,12 @@ bitbang_txrx_be_cpha0(struct spi_device *spi,
{
/* if (cpol == 0) this is SPI_MODE_0; else this is SPI_MODE_2 */
- bool oldbit = !(word & 1);
/* clock starts at inactive polarity */
for (word <<= (32 - bits); likely(bits); bits--) {
/* setup MSB (to slave) on trailing edge */
- if ((flags & SPI_MASTER_NO_TX) == 0) {
- if ((word & (1 << 31)) != oldbit) {
- setmosi(spi, word & (1 << 31));
- oldbit = word & (1 << 31);
- }
- }
+ if ((flags & SPI_MASTER_NO_TX) == 0)
+ setmosi(spi, word & (1 << 31));
spidelay(nsecs); /* T(setup) */
setsck(spi, !cpol);
@@ -81,18 +76,13 @@ bitbang_txrx_be_cpha1(struct spi_device *spi,
{
/* if (cpol == 0) this is SPI_MODE_1; else this is SPI_MODE_3 */
- bool oldbit = !(word & (1 << 31));
/* clock starts at inactive polarity */
for (word <<= (32 - bits); likely(bits); bits--) {
/* setup MSB (to slave) on leading edge */
setsck(spi, !cpol);
- if ((flags & SPI_MASTER_NO_TX) == 0) {
- if ((word & (1 << 31)) != oldbit) {
- setmosi(spi, word & (1 << 31));
- oldbit = word & (1 << 31);
- }
- }
+ if ((flags & SPI_MASTER_NO_TX) == 0)
+ setmosi(spi, word & (1 << 31));
spidelay(nsecs); /* T(setup) */
setsck(spi, cpol);
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2015-07-24 5:37 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-24 5:37 Lars Persson [this message]
[not found] ` <1437716236-12715-1-git-send-email-larper-VrBV9hrLPhE@public.gmane.org>
2015-07-24 10:44 ` [PATCH] Revert "spi: bitbang: only toggle bitchanges" Mark Brown
[not found] ` <20150724104419.GH11162-GFdadSzt00ze9xe1eoZjHA@public.gmane.org>
2015-07-24 11:48 ` Lars Persson
[not found] ` <1437738480.31818.5.camel-VrBV9hrLPhE@public.gmane.org>
2015-07-24 11:55 ` Lars-Peter Clausen
[not found] ` <55B227B2.9080205-Qo5EllUWu/uELgA04lAiVw@public.gmane.org>
2015-07-24 14:50 ` Mark Brown
2015-07-24 11:55 ` Jonas Gorski
2015-07-24 12:30 ` Michael Grzeschik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1437716236-12715-1-git-send-email-larper@axis.com \
--to=lars.persson-vrbv9hrlphe@public.gmane.org \
--cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=larper-VrBV9hrLPhE@public.gmane.org \
--cc=linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=m.grzeschik-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).