From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jarkko Nikula Subject: [PATCH 13/16] spi: spi-fsl-dspi: Remove duplicated register write Date: Tue, 15 Sep 2015 16:26:25 +0300 Message-ID: <1442323588-29642-13-git-send-email-jarkko.nikula@linux.intel.com> References: <1442323588-29642-1-git-send-email-jarkko.nikula@linux.intel.com> Cc: Mark Brown , Nicolas Ferre , Daniel Mack , Haojian Zhuang , Robert Jarzmik , Kukjin Kim , Krzysztof Kozlowski , Jarkko Nikula To: linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Return-path: In-Reply-To: <1442323588-29642-1-git-send-email-jarkko.nikula-VuQAYsv1563Yd54FQh9/CA@public.gmane.org> Sender: linux-spi-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-ID: SPI core makes sure that transfer speed is always set so code here writes the same register with the same value twice. Code has been doing this from the beginning. This looks to me some sort of copy paste error so I'm removing the second write. If this is not the case we can bring it back with a comment. Signed-off-by: Jarkko Nikula --- drivers/spi/spi-fsl-dspi.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c index 86bcdd68c1fe..59a11437db70 100644 --- a/drivers/spi/spi-fsl-dspi.c +++ b/drivers/spi/spi-fsl-dspi.c @@ -409,9 +409,6 @@ static int dspi_transfer_one_message(struct spi_master *master, SPI_MCR_CLR_TXF | SPI_MCR_CLR_RXF); regmap_write(dspi->regmap, SPI_CTAR(dspi->cs), dspi->cur_chip->ctar_val); - if (transfer->speed_hz) - regmap_write(dspi->regmap, SPI_CTAR(dspi->cs), - dspi->cur_chip->ctar_val); trans_mode = dspi->devtype_data->trans_mode; switch (trans_mode) { -- 2.5.1 -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html