From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jarkko Nikula Subject: [PATCH 02/16] spi: s3c64xx: Use transfer speed unconditionally Date: Tue, 15 Sep 2015 16:26:14 +0300 Message-ID: <1442323588-29642-2-git-send-email-jarkko.nikula@linux.intel.com> References: <1442323588-29642-1-git-send-email-jarkko.nikula@linux.intel.com> Cc: Mark Brown , Nicolas Ferre , Daniel Mack , Haojian Zhuang , Robert Jarzmik , Kukjin Kim , Krzysztof Kozlowski , Jarkko Nikula To: linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Return-path: In-Reply-To: <1442323588-29642-1-git-send-email-jarkko.nikula-VuQAYsv1563Yd54FQh9/CA@public.gmane.org> Sender: linux-spi-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-ID: SPI core validates the transfer speed and defaults to spi->max_speed_hz in case the transfer speed is not set. Signed-off-by: Jarkko Nikula --- drivers/spi/spi-s3c64xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c index dee82e1ae65d..8e86e7f6663a 100644 --- a/drivers/spi/spi-s3c64xx.c +++ b/drivers/spi/spi-s3c64xx.c @@ -683,7 +683,7 @@ static int s3c64xx_spi_transfer_one(struct spi_master *master, /* Only BPW and Speed may change across transfers */ bpw = xfer->bits_per_word; - speed = xfer->speed_hz ? : spi->max_speed_hz; + speed = xfer->speed_hz; if (bpw != sdd->cur_bpw || speed != sdd->cur_speed) { sdd->cur_bpw = bpw; -- 2.5.1 -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html