From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jarkko Nikula Subject: [PATCH 05/16] spi: spi-bfin5xx: Calculate transfer speed unconditionally Date: Tue, 15 Sep 2015 16:26:17 +0300 Message-ID: <1442323588-29642-5-git-send-email-jarkko.nikula@linux.intel.com> References: <1442323588-29642-1-git-send-email-jarkko.nikula@linux.intel.com> Cc: Mark Brown , Nicolas Ferre , Daniel Mack , Haojian Zhuang , Robert Jarzmik , Kukjin Kim , Krzysztof Kozlowski , Jarkko Nikula To: linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Return-path: In-Reply-To: <1442323588-29642-1-git-send-email-jarkko.nikula-VuQAYsv1563Yd54FQh9/CA@public.gmane.org> Sender: linux-spi-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-ID: SPI core validates the transfer speed and defaults to spi->max_speed_hz in case the transfer speed is not set so code here won't use the chip->baud value (which is derived from spi->max_speed_hz). Please note driver uses chip->baud at the beginning of message transmission by calling the bfin_spi_restore_state() but then programs per transfer speed in bfin_spi_pump_transfers(). I'm not familiar with the HW so I don't know would it be possible to remove chip->baud completely by either using constant value in bfin_spi_restore_state() or by removing the baud register write there. Signed-off-by: Jarkko Nikula --- drivers/spi/spi-bfin5xx.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/drivers/spi/spi-bfin5xx.c b/drivers/spi/spi-bfin5xx.c index a3d65b4f4944..1e91325bf39c 100644 --- a/drivers/spi/spi-bfin5xx.c +++ b/drivers/spi/spi-bfin5xx.c @@ -661,11 +661,7 @@ static void bfin_spi_pump_transfers(unsigned long data) message->state = RUNNING_STATE; dma_config = 0; - /* Speed setup (surely valid because already checked) */ - if (transfer->speed_hz) - bfin_write(&drv_data->regs->baud, hz_to_spi_baud(transfer->speed_hz)); - else - bfin_write(&drv_data->regs->baud, chip->baud); + bfin_write(&drv_data->regs->baud, hz_to_spi_baud(transfer->speed_hz)); bfin_write(&drv_data->regs->stat, BIT_STAT_CLR); bfin_spi_cs_active(drv_data, chip); -- 2.5.1 -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html