Linux SPI subsystem development
 help / color / mirror / Atom feed
From: kernel-TqfNSX0MhmxHKSADF0wUEw@public.gmane.org
To: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>,
	Lee Jones <lee-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Eric Anholt <eric-WhKQ6XTQaPysTnJN9+BGXg@public.gmane.org>,
	linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-rpi-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: Martin Sperl <kernel-TqfNSX0MhmxHKSADF0wUEw@public.gmane.org>
Subject: [PATCH] spi: bcm2835: change initialization order and switch to platform_get_irq
Date: Thu, 15 Oct 2015 10:09:11 +0000	[thread overview]
Message-ID: <1444903752-9180-1-git-send-email-kernel@martin.sperl.org> (raw)

From: Martin Sperl <kernel-TqfNSX0MhmxHKSADF0wUEw@public.gmane.org>

Change the initialization order of the HW so that the interrupt
is only requested after the HW is initialized

Also the use of irq_of_parse_and_map is replaced by platform_get_irq.

Signed-off-by: Martin Sperl <kernel-TqfNSX0MhmxHKSADF0wUEw@public.gmane.org>
---
 drivers/spi/spi-bcm2835.c |   14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/spi/spi-bcm2835.c b/drivers/spi/spi-bcm2835.c
index 3e8eeb2..cf04960 100644
--- a/drivers/spi/spi-bcm2835.c
+++ b/drivers/spi/spi-bcm2835.c
@@ -777,7 +777,7 @@ static int bcm2835_spi_probe(struct platform_device *pdev)
 		goto out_master_put;
 	}
 
-	bs->irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
+	bs->irq = platform_get_irq(pdev, 0);
 	if (bs->irq <= 0) {
 		dev_err(&pdev->dev, "could not get IRQ: %d\n", bs->irq);
 		err = bs->irq ? bs->irq : -ENODEV;
@@ -786,6 +786,12 @@ static int bcm2835_spi_probe(struct platform_device *pdev)
 
 	clk_prepare_enable(bs->clk);
 
+	bcm2835_dma_init(master, &pdev->dev);
+
+	/* initialise the hardware with the default polarities */
+	bcm2835_wr(bs, BCM2835_SPI_CS,
+		   BCM2835_SPI_CS_CLEAR_RX | BCM2835_SPI_CS_CLEAR_TX);
+
 	err = devm_request_irq(&pdev->dev, bs->irq, bcm2835_spi_interrupt, 0,
 			       dev_name(&pdev->dev), master);
 	if (err) {
@@ -793,12 +799,6 @@ static int bcm2835_spi_probe(struct platform_device *pdev)
 		goto out_clk_disable;
 	}
 
-	bcm2835_dma_init(master, &pdev->dev);
-
-	/* initialise the hardware with the default polarities */
-	bcm2835_wr(bs, BCM2835_SPI_CS,
-		   BCM2835_SPI_CS_CLEAR_RX | BCM2835_SPI_CS_CLEAR_TX);
-
 	err = devm_spi_register_master(&pdev->dev, master);
 	if (err) {
 		dev_err(&pdev->dev, "could not register SPI master: %d\n", err);
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

             reply	other threads:[~2015-10-15 10:09 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-15 10:09 kernel-TqfNSX0MhmxHKSADF0wUEw [this message]
     [not found] ` <1444903752-9180-1-git-send-email-kernel-TqfNSX0MhmxHKSADF0wUEw@public.gmane.org>
2015-10-16 14:35   ` [PATCH] spi: bcm2835: change initialization order and switch to platform_get_irq Mark Brown
2015-10-16 16:41   ` Applied "spi: bcm2835: change initialization order and switch to platform_get_irq" to the spi tree Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1444903752-9180-1-git-send-email-kernel@martin.sperl.org \
    --to=kernel-tqfnsx0mhmxhksadf0wuew@public.gmane.org \
    --cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=eric-WhKQ6XTQaPysTnJN9+BGXg@public.gmane.org \
    --cc=lee-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-rpi-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox