linux-spi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jarkko Nikula <jarkko.nikula-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
To: linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Daniel Mack <daniel-cYrQPVfZoowdnm+yROfE0A@public.gmane.org>,
	Haojian Zhuang
	<haojian.zhuang-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	Robert Jarzmik <robert.jarzmik-GANU6spQydw@public.gmane.org>,
	Jarkko Nikula
	<jarkko.nikula-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
Subject: [PATCH 7/7] spi: pxa2xx: Add support for Intel Broxton
Date: Thu, 22 Oct 2015 16:44:45 +0300	[thread overview]
Message-ID: <1445521485-2029-7-git-send-email-jarkko.nikula@linux.intel.com> (raw)
In-Reply-To: <1445521485-2029-1-git-send-email-jarkko.nikula-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>

LPSS SPI in Intel Broxton is otherwise the same than in Intel Sunrisepoint
but it supports up to four chip selects per port and has different FIFO
thresholds. Patch adds support for two Broxton SoC variants.

Signed-off-by: Jarkko Nikula <jarkko.nikula-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
---
 drivers/spi/spi-pxa2xx.c   | 20 ++++++++++++++++++++
 include/linux/pxa2xx_ssp.h |  1 +
 2 files changed, 21 insertions(+)

diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index 6851649d1b15..b2dfc720772f 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -116,6 +116,16 @@ static const struct lpss_config lpss_platforms[] = {
 		.tx_threshold_lo = 32,
 		.tx_threshold_hi = 56,
 	},
+	{	/* LPSS_BXT_SSP */
+		.offset = 0x200,
+		.reg_general = -1,
+		.reg_ssp = 0x20,
+		.reg_cs_ctrl = 0x24,
+		.reg_capabilities = 0xfc,
+		.rx_threshold = 1,
+		.tx_threshold_lo = 16,
+		.tx_threshold_hi = 48,
+	},
 };
 
 static inline const struct lpss_config
@@ -130,6 +140,7 @@ static bool is_lpss_ssp(const struct driver_data *drv_data)
 	case LPSS_LPT_SSP:
 	case LPSS_BYT_SSP:
 	case LPSS_SPT_SSP:
+	case LPSS_BXT_SSP:
 		return true;
 	default:
 		return false;
@@ -1156,6 +1167,7 @@ static int setup(struct spi_device *spi)
 	case LPSS_LPT_SSP:
 	case LPSS_BYT_SSP:
 	case LPSS_SPT_SSP:
+	case LPSS_BXT_SSP:
 		config = lpss_get_config(drv_data);
 		tx_thres = config->tx_threshold_lo;
 		tx_hi_thres = config->tx_threshold_hi;
@@ -1317,6 +1329,14 @@ static const struct pci_device_id pxa2xx_spi_pci_compound_match[] = {
 	/* SPT-H */
 	{ PCI_VDEVICE(INTEL, 0xa129), LPSS_SPT_SSP },
 	{ PCI_VDEVICE(INTEL, 0xa12a), LPSS_SPT_SSP },
+	/* BXT */
+	{ PCI_VDEVICE(INTEL, 0x0ac2), LPSS_BXT_SSP },
+	{ PCI_VDEVICE(INTEL, 0x0ac4), LPSS_BXT_SSP },
+	{ PCI_VDEVICE(INTEL, 0x0ac6), LPSS_BXT_SSP },
+	/* APL */
+	{ PCI_VDEVICE(INTEL, 0x5ac2), LPSS_BXT_SSP },
+	{ PCI_VDEVICE(INTEL, 0x5ac4), LPSS_BXT_SSP },
+	{ PCI_VDEVICE(INTEL, 0x5ac6), LPSS_BXT_SSP },
 	{ },
 };
 
diff --git a/include/linux/pxa2xx_ssp.h b/include/linux/pxa2xx_ssp.h
index 92273776bce6..c2f2574ff61c 100644
--- a/include/linux/pxa2xx_ssp.h
+++ b/include/linux/pxa2xx_ssp.h
@@ -198,6 +198,7 @@ enum pxa_ssp_type {
 	LPSS_LPT_SSP, /* Keep LPSS types sorted with lpss_platforms[] */
 	LPSS_BYT_SSP,
 	LPSS_SPT_SSP,
+	LPSS_BXT_SSP,
 };
 
 struct ssp_device {
-- 
2.6.1

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2015-10-22 13:44 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-22 13:44 [PATCH 1/7] spi: pxa2xx: move debug messages to pump_transfer() Jarkko Nikula
     [not found] ` <1445521485-2029-1-git-send-email-jarkko.nikula-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2015-10-22 13:44   ` [PATCH 2/7] spi: pxa2xx: derive struct chip_data from struct drv_data Jarkko Nikula
     [not found]     ` <1445521485-2029-2-git-send-email-jarkko.nikula-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2015-10-22 23:57       ` Applied "spi: pxa2xx: derive struct chip_data from struct drv_data" to the spi tree Mark Brown
2015-10-25 11:42       ` [PATCH 2/7] spi: pxa2xx: derive struct chip_data from struct drv_data Robert Jarzmik
2015-10-22 13:44   ` [PATCH 3/7] spi: pxa2xx: Convert unique ID string of ACPI device as unsigned integer Jarkko Nikula
     [not found]     ` <1445521485-2029-3-git-send-email-jarkko.nikula-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2015-10-22 23:57       ` Applied "spi: pxa2xx: Convert unique ID string of ACPI device as unsigned integer" to the spi tree Mark Brown
2015-10-22 13:44   ` [PATCH 4/7] spi: pxa2xx: Save other reg_cs_ctrl bits when configuring chip select Jarkko Nikula
     [not found]     ` <1445521485-2029-4-git-send-email-jarkko.nikula-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2015-10-22 23:57       ` Applied "spi: pxa2xx: Save other reg_cs_ctrl bits when configuring chip select" to the spi tree Mark Brown
2015-10-25 11:49       ` [PATCH 4/7] spi: pxa2xx: Save other reg_cs_ctrl bits when configuring chip select Robert Jarzmik
2015-10-22 13:44   ` [PATCH 5/7] spi: pxa2xx: Align a few defines Jarkko Nikula
     [not found]     ` <1445521485-2029-5-git-send-email-jarkko.nikula-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2015-10-22 23:57       ` Applied "spi: pxa2xx: Align a few defines" to the spi tree Mark Brown
2015-10-25 11:50       ` [PATCH 5/7] spi: pxa2xx: Align a few defines Robert Jarzmik
2015-10-22 13:44   ` [PATCH 6/7] spi: pxa2xx: Add support for multiple LPSS chip select signals Jarkko Nikula
     [not found]     ` <1445521485-2029-6-git-send-email-jarkko.nikula-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2015-10-25 12:02       ` Robert Jarzmik
     [not found]         ` <87bnbnkvg9.fsf-4ty26DBLk+jEm7gnYqmdkQ@public.gmane.org>
2015-10-26  9:35           ` Jarkko Nikula
2015-10-22 13:44   ` Jarkko Nikula [this message]
     [not found]     ` <1445521485-2029-7-git-send-email-jarkko.nikula-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2015-10-30  2:20       ` [PATCH 7/7] spi: pxa2xx: Add support for Intel Broxton Mark Brown
2015-10-22 23:57   ` Applied "spi: pxa2xx: move debug messages to pump_transfer()" to the spi tree Mark Brown
2015-10-25 11:39   ` [PATCH 1/7] spi: pxa2xx: move debug messages to pump_transfer() Robert Jarzmik

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1445521485-2029-7-git-send-email-jarkko.nikula@linux.intel.com \
    --to=jarkko.nikula-vuqaysv1563yd54fqh9/ca@public.gmane.org \
    --cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=daniel-cYrQPVfZoowdnm+yROfE0A@public.gmane.org \
    --cc=haojian.zhuang-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=robert.jarzmik-GANU6spQydw@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).