[PATCH v2 0/5] mt8173 spi multiple devices support

[PATCH v2 0/5] mt8173 spi multiple devices support

[Leilk Liu]

This series are based on 4.3-rc1 and provide 5 patches to support
mt8173 spi multiple devices.

Change in v2:
1. add mt8173 board name on patch 5/5 subject.
2. fix this series merge conflict.

Change in v1:
1. update document to add cs-gpio;
2. remove mtk_spi_config function;
3. move controller_data to master->setup;
4. add mt8173 spi multiple devices support;
5. update dts to add cs-gpio and modify cs pin to gpio function.

Leilk Liu (5):
  dt-binding: spi: Mediatek: Update document devicetree bindings to
    support multiple devices
  spi: mediatek: remove mtk_spi_config
  spi: mediatek: handle controller_data in mtk_spi_setup
  spi: mediatek: mt8173 spi multiple devices support
  arm64: dts: mt8173: spi bus dts support multiple devices

 .../devicetree/bindings/spi/spi-mt65xx.txt         |   9 +-
 arch/arm64/boot/dts/mediatek/mt8173-evb.dts        |   3 +-
 drivers/spi/spi-mt65xx.c                           | 129 +++++++++++++--------
 3 files changed, 91 insertions(+), 50 deletions(-)

--
1.8.1.1.dirty

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 1/5] dt-binding: spi: Mediatek: Update document devicetree bindings to support multiple devices

[Leilk Liu]

This patch updates document devicetree bindings
to support multiple devices.

Signed-off-by: Leilk Liu <leilk.liu@mediatek.com>
---
 Documentation/devicetree/bindings/spi/spi-mt65xx.txt | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/spi/spi-mt65xx.txt b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt
index 6160ffb..ce363c923f 100644
--- a/Documentation/devicetree/bindings/spi/spi-mt65xx.txt
+++ b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt
@@ -29,8 +29,11 @@ Required properties:
   muxes clock, and "spi-clk" for the clock gate.
 
 Optional properties:
+-cs-gpios: see spi-bus.txt, only required for MT8173.
+
 - mediatek,pad-select: specify which pins group(ck/mi/mo/cs) spi
-  controller used, this value should be 0~3, only required for MT8173.
+  controller used. This is a array, the element value should be 0~3,
+  only required for MT8173.
     0: specify GPIO69,70,71,72 for spi pins.
     1: specify GPIO102,103,104,105 for spi pins.
     2: specify GPIO128,129,130,131 for spi pins.
@@ -49,7 +52,7 @@ spi: spi@1100a000 {
 		 <&topckgen CLK_TOP_SPI_SEL>,
 		 <&pericfg CLK_PERI_SPI0>;
 	clock-names = "parent-clk", "sel-clk", "spi-clk";
-
-	mediatek,pad-select = <0>;
+	cs-gpios = <&pio 105 GPIO_ACTIVE_LOW>, <&pio 72 GPIO_ACTIVE_LOW>;
+	mediatek,pad-select = <1>, <0>;
 	status = "disabled";
 };
-- 
1.8.1.1.dirty

[PATCH v2 2/5] spi: mediatek: remove mtk_spi_config

[Leilk Liu]

mtk_spi_config() and mtk_spi_prepare_message() both initialize
spi register, so remove mtk_spi_config() and init all register
in mtk_spi_prepare_message().

Signed-off-by: Leilk Liu <leilk.liu@mediatek.com>
---
 drivers/spi/spi-mt65xx.c | 59 +++++++++++++++++++++---------------------------
 1 file changed, 26 insertions(+), 33 deletions(-)

diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c
index ecb6c58..7bd84c8 100644
--- a/drivers/spi/spi-mt65xx.c
+++ b/drivers/spi/spi-mt65xx.c
@@ -131,10 +131,34 @@ static void mtk_spi_reset(struct mtk_spi *mdata)
 	writel(reg_val, mdata->base + SPI_CMD_REG);
 }
 
-static void mtk_spi_config(struct mtk_spi *mdata,
-			   struct mtk_chip_config *chip_config)
+static int mtk_spi_prepare_message(struct spi_master *master,
+				   struct spi_message *msg)
 {
+	u16 cpha, cpol;
 	u32 reg_val;
+	struct mtk_chip_config *chip_config;
+	struct spi_device *spi = msg->spi;
+	struct mtk_spi *mdata = spi_master_get_devdata(master);
+
+	cpha = spi->mode & SPI_CPHA ? 1 : 0;
+	cpol = spi->mode & SPI_CPOL ? 1 : 0;
+
+	chip_config = spi->controller_data;
+	if (!chip_config) {
+		chip_config = (void *)&mtk_default_chip_info;
+		spi->controller_data = chip_config;
+	}
+
+	reg_val = readl(mdata->base + SPI_CMD_REG);
+	if (cpha)
+		reg_val |= SPI_CMD_CPHA;
+	else
+		reg_val &= ~SPI_CMD_CPHA;
+	if (cpol)
+		reg_val |= SPI_CMD_CPOL;
+	else
+		reg_val &= ~SPI_CMD_CPOL;
+	writel(reg_val, mdata->base + SPI_CMD_REG);
 
 	reg_val = readl(mdata->base + SPI_CMD_REG);
 
@@ -171,37 +195,6 @@ static void mtk_spi_config(struct mtk_spi *mdata,
 	/* pad select */
 	if (mdata->dev_comp->need_pad_sel)
 		writel(mdata->pad_sel, mdata->base + SPI_PAD_SEL_REG);
-}
-
-static int mtk_spi_prepare_message(struct spi_master *master,
-				   struct spi_message *msg)
-{
-	u32 reg_val;
-	u8 cpha, cpol;
-	struct mtk_chip_config *chip_config;
-	struct spi_device *spi = msg->spi;
-	struct mtk_spi *mdata = spi_master_get_devdata(master);
-
-	cpha = spi->mode & SPI_CPHA ? 1 : 0;
-	cpol = spi->mode & SPI_CPOL ? 1 : 0;
-
-	reg_val = readl(mdata->base + SPI_CMD_REG);
-	if (cpha)
-		reg_val |= SPI_CMD_CPHA;
-	else
-		reg_val &= ~SPI_CMD_CPHA;
-	if (cpol)
-		reg_val |= SPI_CMD_CPOL;
-	else
-		reg_val &= ~SPI_CMD_CPOL;
-	writel(reg_val, mdata->base + SPI_CMD_REG);
-
-	chip_config = spi->controller_data;
-	if (!chip_config) {
-		chip_config = (void *)&mtk_default_chip_info;
-		spi->controller_data = chip_config;
-	}
-	mtk_spi_config(mdata, chip_config);
 
 	return 0;
 }
-- 
1.8.1.1.dirty

[PATCH v2 3/5] spi: mediatek: handle controller_data in mtk_spi_setup

[Leilk Liu]

controller_data is related with device, so move to master->setup
function.

Signed-off-by: Leilk Liu <leilk.liu@mediatek.com>
---
 drivers/spi/spi-mt65xx.c | 19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)

diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c
index 7bd84c8..406695a 100644
--- a/drivers/spi/spi-mt65xx.c
+++ b/drivers/spi/spi-mt65xx.c
@@ -136,19 +136,13 @@ static int mtk_spi_prepare_message(struct spi_master *master,
 {
 	u16 cpha, cpol;
 	u32 reg_val;
-	struct mtk_chip_config *chip_config;
 	struct spi_device *spi = msg->spi;
+	struct mtk_chip_config *chip_config = spi->controller_data;
 	struct mtk_spi *mdata = spi_master_get_devdata(master);
 
 	cpha = spi->mode & SPI_CPHA ? 1 : 0;
 	cpol = spi->mode & SPI_CPOL ? 1 : 0;
 
-	chip_config = spi->controller_data;
-	if (!chip_config) {
-		chip_config = (void *)&mtk_default_chip_info;
-		spi->controller_data = chip_config;
-	}
-
 	reg_val = readl(mdata->base + SPI_CMD_REG);
 	if (cpha)
 		reg_val |= SPI_CMD_CPHA;
@@ -406,6 +400,16 @@ static bool mtk_spi_can_dma(struct spi_master *master,
 	return xfer->len > MTK_SPI_MAX_FIFO_SIZE;
 }
 
+static int mtk_spi_setup(struct spi_device *spi)
+{
+	struct mtk_spi *mdata = spi_master_get_devdata(spi->master);
+
+	if (!spi->controller_data)
+		spi->controller_data = (void *)&mtk_default_chip_info;
+
+	return 0;
+}
+
 static irqreturn_t mtk_spi_interrupt(int irq, void *dev_id)
 {
 	u32 cmd, reg_val, cnt;
@@ -493,6 +497,7 @@ static int mtk_spi_probe(struct platform_device *pdev)
 	master->prepare_message = mtk_spi_prepare_message;
 	master->transfer_one = mtk_spi_transfer_one;
 	master->can_dma = mtk_spi_can_dma;
+	master->setup = mtk_spi_setup;
 
 	of_id = of_match_node(mtk_spi_of_match, pdev->dev.of_node);
 	if (!of_id) {
-- 
1.8.1.1.dirty

[PATCH v2 4/5] spi: mediatek: mt8173 spi multiple devices support

[Leilk Liu]

mt8173 IC spi HW has 4 gpio group, it's possible to support
max <= 4 slave devices, even mtk spi HW is not congruent to spi core.
1. When a device do a spi_message transfer, spi HW should know
   which pad-group this device is on, and then writes pad-select
   register.
2. Mtk pad-select register just selects which MISO pin HW will
   receive data. For example, pad-select=1(select spi1 pins), HW just
   receives data from spi1 MISO, but it still send waveform to all 4
   group cs/clk/mosi. If cs pin in other groups is still spi mode,
   after spi1 is selected(by active cs pin), devices on other group
   will also be selected.

Signed-off-by: Leilk Liu <leilk.liu@mediatek.com>
---
 drivers/spi/spi-mt65xx.c | 65 ++++++++++++++++++++++++++++++++++++++----------
 1 file changed, 52 insertions(+), 13 deletions(-)

diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c
index 406695a..563954a 100644
--- a/drivers/spi/spi-mt65xx.c
+++ b/drivers/spi/spi-mt65xx.c
@@ -20,6 +20,7 @@
 #include <linux/ioport.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/of_gpio.h>
 #include <linux/platform_device.h>
 #include <linux/platform_data/spi-mt65xx.h>
 #include <linux/pm_runtime.h>
@@ -84,7 +85,8 @@ struct mtk_spi_compatible {
 struct mtk_spi {
 	void __iomem *base;
 	u32 state;
-	u32 pad_sel;
+	int pad_num;
+	u32 *pad_sel;
 	struct clk *parent_clk, *sel_clk, *spi_clk;
 	struct spi_transfer *cur_transfer;
 	u32 xfer_len;
@@ -188,7 +190,8 @@ static int mtk_spi_prepare_message(struct spi_master *master,
 
 	/* pad select */
 	if (mdata->dev_comp->need_pad_sel)
-		writel(mdata->pad_sel, mdata->base + SPI_PAD_SEL_REG);
+		writel(mdata->pad_sel[spi->chip_select],
+		       mdata->base + SPI_PAD_SEL_REG);
 
 	return 0;
 }
@@ -407,6 +410,9 @@ static int mtk_spi_setup(struct spi_device *spi)
 	if (!spi->controller_data)
 		spi->controller_data = (void *)&mtk_default_chip_info;
 
+	if (mdata->dev_comp->need_pad_sel)
+		gpio_direction_output(spi->cs_gpio, !(spi->mode & SPI_CS_HIGH));
+
 	return 0;
 }
 
@@ -481,7 +487,7 @@ static int mtk_spi_probe(struct platform_device *pdev)
 	struct mtk_spi *mdata;
 	const struct of_device_id *of_id;
 	struct resource *res;
-	int irq, ret;
+	int i, irq, ret;
 
 	master = spi_alloc_master(&pdev->dev, sizeof(*mdata));
 	if (!master) {
@@ -512,21 +518,34 @@ static int mtk_spi_probe(struct platform_device *pdev)
 		master->flags = SPI_MASTER_MUST_TX;
 
 	if (mdata->dev_comp->need_pad_sel) {
-		ret = of_property_read_u32(pdev->dev.of_node,
-					   "mediatek,pad-select",
-					   &mdata->pad_sel);
-		if (ret) {
-			dev_err(&pdev->dev, "failed to read pad select: %d\n",
-				ret);
+		mdata->pad_num = of_property_count_u32_elems(
+			pdev->dev.of_node,
+			"mediatek,pad-select");
+		if (mdata->pad_num < 0) {
+			dev_err(&pdev->dev,
+				"No 'mediatek,pad-select' property\n");
+			ret = -EINVAL;
 			goto err_put_master;
 		}
 
-		if (mdata->pad_sel > MT8173_SPI_MAX_PAD_SEL) {
-			dev_err(&pdev->dev, "wrong pad-select: %u\n",
-				mdata->pad_sel);
-			ret = -EINVAL;
+		mdata->pad_sel = devm_kmalloc_array(&pdev->dev, mdata->pad_num,
+						    sizeof(u32), GFP_KERNEL);
+		if (!mdata->pad_sel) {
+			ret = -ENOMEM;
 			goto err_put_master;
 		}
+
+		for (i = 0; i < mdata->pad_num; i++) {
+			of_property_read_u32_index(pdev->dev.of_node,
+						   "mediatek,pad-select",
+						   i, &mdata->pad_sel[i]);
+			if (mdata->pad_sel[i] > MT8173_SPI_MAX_PAD_SEL) {
+				dev_err(&pdev->dev, "wrong pad-sel[%d]: %u\n",
+					i, mdata->pad_sel[i]);
+				ret = -EINVAL;
+				goto err_put_master;
+			}
+		}
 	}
 
 	platform_set_drvdata(pdev, master);
@@ -604,6 +623,26 @@ static int mtk_spi_probe(struct platform_device *pdev)
 		goto err_put_master;
 	}
 
+	if (mdata->dev_comp->need_pad_sel) {
+		if (mdata->pad_num != master->num_chipselect) {
+			dev_err(&pdev->dev,
+				"pad_num does not match num_chipselect(%d != %d)\n",
+				mdata->pad_num, master->num_chipselect);
+			ret = -EINVAL;
+			goto err_put_master;
+		}
+
+		for (i = 0; i < master->num_chipselect; i++) {
+			ret = devm_gpio_request(&pdev->dev, master->cs_gpios[i],
+						dev_name(&pdev->dev));
+			if (ret) {
+				dev_err(&pdev->dev,
+					"can't get CS GPIO %i\n", i);
+				goto err_put_master;
+			}
+		}
+	}
+
 	return 0;
 
 err_disable_clk:
-- 
1.8.1.1.dirty

[PATCH v2 5/5] arm64: dts: mt8173: spi bus dts support multiple devices

[Leilk Liu]

This patch support multiple devices for MT8173 board.

Signed-off-by: Leilk Liu <leilk.liu@mediatek.com>
---
 arch/arm64/boot/dts/mediatek/mt8173-evb.dts | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
index 811cb76..e7a4416 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
@@ -393,7 +393,7 @@
 			pinmux = <MT8173_PIN_69_SPI_CK__FUNC_SPI_CK_0_>,
 				<MT8173_PIN_70_SPI_MI__FUNC_SPI_MI_0_>,
 				<MT8173_PIN_71_SPI_MO__FUNC_SPI_MO_0_>,
-				<MT8173_PIN_72_SPI_CS__FUNC_SPI_CS_0_>;
+				<MT8173_PIN_72_SPI_CS__FUNC_GPIO72>;
 		};
 	};
 };
@@ -401,6 +401,7 @@
 &spi {
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi_pins_a>;
+	cs-gpios = <&pio 72 0>;
 	mediatek,pad-select = <0>;
 	status = "okay";
 };
-- 
1.8.1.1.dirty

Applied "spi: mediatek: Update document devicetree bindings to support multiple devices" to the spi tree

[Mark Brown]

The patch

   spi: mediatek: Update document devicetree bindings to support multiple devices

has been applied to the spi tree at

   git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From eca3a1ee8dd7ec5819bd77d598044eb6ecdf4495 Mon Sep 17 00:00:00 2001
From: Leilk Liu <leilk.liu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Date: Mon, 26 Oct 2015 16:09:41 +0800
Subject: [PATCH] spi: mediatek: Update document devicetree bindings to support
 multiple devices

This patch updates document devicetree bindings
to support multiple devices.

Signed-off-by: Leilk Liu <leilk.liu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Signed-off-by: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
 Documentation/devicetree/bindings/spi/spi-mt65xx.txt | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/spi/spi-mt65xx.txt b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt
index 6160ffb..ce363c923f 100644
--- a/Documentation/devicetree/bindings/spi/spi-mt65xx.txt
+++ b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt
@@ -29,8 +29,11 @@ Required properties:
   muxes clock, and "spi-clk" for the clock gate.
 
 Optional properties:
+-cs-gpios: see spi-bus.txt, only required for MT8173.
+
 - mediatek,pad-select: specify which pins group(ck/mi/mo/cs) spi
-  controller used, this value should be 0~3, only required for MT8173.
+  controller used. This is a array, the element value should be 0~3,
+  only required for MT8173.
     0: specify GPIO69,70,71,72 for spi pins.
     1: specify GPIO102,103,104,105 for spi pins.
     2: specify GPIO128,129,130,131 for spi pins.
@@ -49,7 +52,7 @@ spi: spi@1100a000 {
 		 <&topckgen CLK_TOP_SPI_SEL>,
 		 <&pericfg CLK_PERI_SPI0>;
 	clock-names = "parent-clk", "sel-clk", "spi-clk";
-
-	mediatek,pad-select = <0>;
+	cs-gpios = <&pio 105 GPIO_ACTIVE_LOW>, <&pio 72 GPIO_ACTIVE_LOW>;
+	mediatek,pad-select = <1>, <0>;
 	status = "disabled";
 };
-- 
2.6.1

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html