[PATCH v2] spi: sun4i: allow transfers to set transmission speed

[Marcus Weseloh <mweseloh42-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>]

Allow transfers to set the transmission speed rather than using the
device max_speed_hz value. The SPI core makes sure that the speed_hz
value is always set on the transfer.

Signed-off-by: Marcus Weseloh <mweseloh42-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
Changes from v1:
  * Remove fallback to spi->max_speed_hz and sanity checks (as requested
    by Mark Brown)
  * Also patch identical code in sun6i-spi.c
---
 drivers/spi/spi-sun4i.c | 8 ++++----
 drivers/spi/spi-sun6i.c | 8 ++++----
 2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/spi/spi-sun4i.c b/drivers/spi/spi-sun4i.c
index fbb0a4d..f60a6d6 100644
--- a/drivers/spi/spi-sun4i.c
+++ b/drivers/spi/spi-sun4i.c
@@ -229,8 +229,8 @@ static int sun4i_spi_transfer_one(struct spi_master *master,
 
 	/* Ensure that we have a parent clock fast enough */
 	mclk_rate = clk_get_rate(sspi->mclk);
-	if (mclk_rate < (2 * spi->max_speed_hz)) {
-		clk_set_rate(sspi->mclk, 2 * spi->max_speed_hz);
+	if (mclk_rate < (2 * tfr->speed_hz)) {
+		clk_set_rate(sspi->mclk, 2 * tfr->speed_hz);
 		mclk_rate = clk_get_rate(sspi->mclk);
 	}
 
@@ -248,14 +248,14 @@ static int sun4i_spi_transfer_one(struct spi_master *master,
 	 * First try CDR2, and if we can't reach the expected
 	 * frequency, fall back to CDR1.
 	 */
-	div = mclk_rate / (2 * spi->max_speed_hz);
+	div = mclk_rate / (2 * tfr->speed_hz);
 	if (div <= (SUN4I_CLK_CTL_CDR2_MASK + 1)) {
 		if (div > 0)
 			div--;
 
 		reg = SUN4I_CLK_CTL_CDR2(div) | SUN4I_CLK_CTL_DRS;
 	} else {
-		div = ilog2(mclk_rate) - ilog2(spi->max_speed_hz);
+		div = ilog2(mclk_rate) - ilog2(tfr->speed_hz);
 		reg = SUN4I_CLK_CTL_CDR1(div);
 	}
 
diff --git a/drivers/spi/spi-sun6i.c b/drivers/spi/spi-sun6i.c
index ac48f59..42e2c4b 100644
--- a/drivers/spi/spi-sun6i.c
+++ b/drivers/spi/spi-sun6i.c
@@ -217,8 +217,8 @@ static int sun6i_spi_transfer_one(struct spi_master *master,
 
 	/* Ensure that we have a parent clock fast enough */
 	mclk_rate = clk_get_rate(sspi->mclk);
-	if (mclk_rate < (2 * spi->max_speed_hz)) {
-		clk_set_rate(sspi->mclk, 2 * spi->max_speed_hz);
+	if (mclk_rate < (2 * tfr->speed_hz)) {
+		clk_set_rate(sspi->mclk, 2 * tfr->speed_hz);
 		mclk_rate = clk_get_rate(sspi->mclk);
 	}
 
@@ -236,14 +236,14 @@ static int sun6i_spi_transfer_one(struct spi_master *master,
 	 * First try CDR2, and if we can't reach the expected
 	 * frequency, fall back to CDR1.
 	 */
-	div = mclk_rate / (2 * spi->max_speed_hz);
+	div = mclk_rate / (2 * tfr->speed_hz);
 	if (div <= (SUN6I_CLK_CTL_CDR2_MASK + 1)) {
 		if (div > 0)
 			div--;
 
 		reg = SUN6I_CLK_CTL_CDR2(div) | SUN6I_CLK_CTL_DRS;
 	} else {
-		div = ilog2(mclk_rate) - ilog2(spi->max_speed_hz);
+		div = ilog2(mclk_rate) - ilog2(tfr->speed_hz);
 		reg = SUN6I_CLK_CTL_CDR1(div);
 	}
 
-- 
1.9.1