linux-spi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: kernel-TqfNSX0MhmxHKSADF0wUEw@public.gmane.org
To: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>,
	Lee Jones <lee-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Eric Anholt <eric-WhKQ6XTQaPysTnJN9+BGXg@public.gmane.org>,
	linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-rpi-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: Martin Sperl <kernel-TqfNSX0MhmxHKSADF0wUEw@public.gmane.org>
Subject: [PATCH v3 1/8] spi: core: added spi_resource management
Date: Mon, 14 Dec 2015 15:20:18 +0000	[thread overview]
Message-ID: <1450106426-2277-2-git-send-email-kernel@martin.sperl.org> (raw)
In-Reply-To: <1450106426-2277-1-git-send-email-kernel-TqfNSX0MhmxHKSADF0wUEw@public.gmane.org>

From: Martin Sperl <kernel-TqfNSX0MhmxHKSADF0wUEw@public.gmane.org>

SPI resource management framework used while processing a spi_message
via the spi-core.

The basic idea is taken from devres, but as the allocation may happen
fairly frequently, some provisioning (in the form of an unused spi_device
pointer argument to spi_res_alloc) has been made so that at a later stage
we may implement reuse objects allocated earlier avoiding the repeated
allocation by keeping a cache of objects that we can reuse.

This framework can get used for:
* rewriting spi_messages
  * to fullfill alignment requirements of the spi_master HW
  * to fullfill transfer length requirements
    (e.g: transfers need to be less than 64k)
  * consolidate spi_messages with multiple transfers into a single transfer
  when the total transfer length is below a threshold.
* reimplement spi_unmap_buf without explicitly needing to check if it has
  been mapped

Signed-off-by: Martin Sperl <kernel-TqfNSX0MhmxHKSADF0wUEw@public.gmane.org>
---
 drivers/spi/spi.c       |   91 +++++++++++++++++++++++++++++++++++++++++++++++
 include/linux/spi/spi.h |   36 +++++++++++++++++++
 2 files changed, 127 insertions(+)

Changelog:
  V2 -> V3: contains several fixes based on feedback by Andy Shevchenko

diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index d004a3c..8149602 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -1025,6 +1025,8 @@ out:
 	if (msg->status && master->handle_err)
 		master->handle_err(master, msg);

+	spi_res_release(master, msg);
+
 	spi_finalize_current_message(master);

 	return ret;
@@ -2011,6 +2013,95 @@ struct spi_master *spi_busnum_to_master(u16 bus_num)
 }
 EXPORT_SYMBOL_GPL(spi_busnum_to_master);

+/*-------------------------------------------------------------------------*/
+
+/* Core methods for SPI resource management */
+
+/**
+ * spi_res_alloc - allocate a spi resource that is life-cycle managed
+ *                 during the processing of a spi_message while using
+ *                 spi_transfer_one
+ * @spi:     the spi device for which we allocate memory
+ * @release: the release code to execute for this resource
+ * @size:    size to alloc and return
+ * @gfp:     GFP allocation flags
+ *
+ * Return: the pointer to the allocated data
+ *
+ * This may get enhanced in the future to allocate from a memory pool
+ * of the @spi_device or @spi_master to avoid repeated allocations.
+ */
+void *spi_res_alloc(struct spi_device *spi,
+		    spi_res_release_t release,
+		    size_t size, gfp_t gfp)
+{
+	struct spi_res *sres;
+
+	sres = kzalloc(sizeof(*sres) + size, gfp);
+	if (!sres)
+		return NULL;
+
+	INIT_LIST_HEAD(&sres->entry);
+	sres->release = release;
+
+	return sres->data;
+}
+EXPORT_SYMBOL_GPL(spi_res_alloc);
+
+/**
+ * spi_res_free - free an spi resource
+ * @res: pointer to the custom data of a resource
+ *
+ */
+void spi_res_free(void *res)
+{
+	struct spi_res *sres = container_of(res, struct spi_res, data);
+
+	if (!res)
+		return;
+
+	WARN_ON(!list_empty(&sres->entry));
+	kfree(sres);
+}
+EXPORT_SYMBOL_GPL(spi_res_free);
+
+/**
+ * spi_res_add - add a spi_res to the spi_message
+ * @message: the spi message
+ * @res:     the spi_resource
+ */
+void spi_res_add(struct spi_message *message, void *res)
+{
+	struct spi_res *sres = container_of(res, struct spi_res, data);
+
+	WARN_ON(!list_empty(&sres->entry));
+	list_add_tail(&sres->entry, &message->resources);
+}
+EXPORT_SYMBOL_GPL(spi_res_add);
+
+/**
+ * spi_res_release - release all spi resources for this message
+ * @master:  the @spi_master
+ * @message: the @spi_message
+ */
+void spi_res_release(struct spi_master *master,
+		     struct spi_message *message)
+{
+	struct spi_res *res;
+
+	while (!list_empty(&message->resources)) {
+		res = list_last_entry(&message->resources,
+				      struct spi_res, entry);
+
+		if (res->release)
+			res->release(master, message, res->data);
+
+		list_del(&res->entry);
+
+		kfree(res);
+	}
+}
+EXPORT_SYMBOL_GPL(spi_res_release);

 /*-------------------------------------------------------------------------*/

diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index 9ea73eb..739a476 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -576,6 +576,37 @@ extern void spi_unregister_master(struct spi_master *master);

 extern struct spi_master *spi_busnum_to_master(u16 busnum);

+/*
+ * SPI resource management while processing a SPI message
+ */
+
+/**
+ * struct spi_res - spi resource management structure
+ * @entry:   list entry
+ * @release: release code called prior to freeing this resource
+ * @data:    extra data allocated for the specific use-case
+ *
+ * this is based on ideas from devres, but focused on life-cycle
+ * management during spi_message processing
+ */
+typedef void (*spi_res_release_t)(struct spi_master *master,
+				  struct spi_message *msg,
+				  void *res);
+struct spi_res {
+	struct list_head        entry;
+	spi_res_release_t       release;
+	unsigned long long      data[]; /* guarantee ull alignment */
+};
+
+extern void *spi_res_alloc(struct spi_device *spi,
+			   spi_res_release_t release,
+			   size_t size, gfp_t gfp);
+extern void spi_res_add(struct spi_message *message, void *res);
+extern void spi_res_free(void *res);
+
+extern void spi_res_release(struct spi_master *master,
+			    struct spi_message *message);
+
 /*---------------------------------------------------------------------------*/

 /*
@@ -714,6 +745,7 @@ struct spi_transfer {
  * @status: zero for success, else negative errno
  * @queue: for use by whichever driver currently owns the message
  * @state: for use by whichever driver currently owns the message
+ * @resources: for resource management when the spi message is processed
  *
  * A @spi_message is used to execute an atomic sequence of data transfers,
  * each represented by a struct spi_transfer.  The sequence is "atomic"
@@ -760,11 +792,15 @@ struct spi_message {
 	 */
 	struct list_head	queue;
 	void			*state;
+
+	/* list of spi_res reources when the spi message is processed */
+	struct list_head        resources;
 };

 static inline void spi_message_init_no_memset(struct spi_message *m)
 {
 	INIT_LIST_HEAD(&m->transfers);
+	INIT_LIST_HEAD(&m->resources);
 }

 static inline void spi_message_init(struct spi_message *m)
--
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2015-12-14 15:20 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-14 15:20 [PATCH v3 0/8] spi: spi-message transformation framework kernel-TqfNSX0MhmxHKSADF0wUEw
     [not found] ` <1450106426-2277-1-git-send-email-kernel-TqfNSX0MhmxHKSADF0wUEw@public.gmane.org>
2015-12-14 15:20   ` kernel-TqfNSX0MhmxHKSADF0wUEw [this message]
2015-12-14 15:20   ` [PATCH v3 2/8] spi: core: add spi_replace_transfers method kernel-TqfNSX0MhmxHKSADF0wUEw
2015-12-14 15:20   ` [PATCH v3 3/8] spi: core: add spi_split_transfers_maxsize kernel-TqfNSX0MhmxHKSADF0wUEw
     [not found]     ` <1450106426-2277-4-git-send-email-kernel-TqfNSX0MhmxHKSADF0wUEw@public.gmane.org>
2016-02-16  8:52       ` Geert Uytterhoeven
2015-12-14 15:20   ` [PATCH v3 4/8] spi: core: added spi_split_transfers_unaligned kernel-TqfNSX0MhmxHKSADF0wUEw
     [not found]     ` <1450106426-2277-5-git-send-email-kernel-TqfNSX0MhmxHKSADF0wUEw@public.gmane.org>
2015-12-16 16:11       ` Martin Sperl
2015-12-14 15:20   ` [PATCH v3 5/8] spi: core: add spi_merge_transfers method kernel-TqfNSX0MhmxHKSADF0wUEw
2015-12-14 15:20   ` [PATCH v3 6/8] spi: core: add spi_master.translate_message kernel-TqfNSX0MhmxHKSADF0wUEw
2015-12-14 15:20   ` [PATCH v3 7/8] spi: core: add spi_master.min_dma_len and supporting methods kernel-TqfNSX0MhmxHKSADF0wUEw
2015-12-14 15:20   ` [PATCH v3 8/8] spi: bcm2835: move to spi-core methods translate_message and can_dma kernel-TqfNSX0MhmxHKSADF0wUEw

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1450106426-2277-2-git-send-email-kernel@martin.sperl.org \
    --to=kernel-tqfnsx0mhmxhksadf0wuew@public.gmane.org \
    --cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=eric-WhKQ6XTQaPysTnJN9+BGXg@public.gmane.org \
    --cc=lee-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=linux-rpi-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).