From: Jarkko Nikula <jarkko.nikula-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
To: linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Daniel Mack <daniel-cYrQPVfZoowdnm+yROfE0A@public.gmane.org>,
Haojian Zhuang
<haojian.zhuang-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Robert Jarzmik <robert.jarzmik-GANU6spQydw@public.gmane.org>,
Jarkko Nikula
<jarkko.nikula-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
Subject: [PATCH] spi: pxa2xx: Remove CONFIG_SPI_PXA2XX_DMA
Date: Wed, 13 Jan 2016 16:20:07 +0200 [thread overview]
Message-ID: <1452694807-29304-1-git-send-email-jarkko.nikula@linux.intel.com> (raw)
After removal of legacy PXA DMA code by the commit 6356437e65c2
("spi: spi-pxa2xx: remove legacy PXA DMA bits") the
CONFIG_SPI_PXA2XX_DMA follows the CONFIG_SPI_PXA2XX and cannot be disabled
alone. Therefore remove this config symbol and dead definitions from the
spi-pxa2xx.h.
Signed-off-by: Jarkko Nikula <jarkko.nikula-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
---
drivers/spi/Kconfig | 4 ----
drivers/spi/Makefile | 3 +--
drivers/spi/spi-pxa2xx.h | 35 -----------------------------------
3 files changed, 1 insertion(+), 41 deletions(-)
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 77064160dd76..1b959eb7098b 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -415,10 +415,6 @@ config SPI_PPC4xx
help
This selects a driver for the PPC4xx SPI Controller.
-config SPI_PXA2XX_DMA
- def_bool y
- depends on SPI_PXA2XX
-
config SPI_PXA2XX
tristate "PXA2xx SSP SPI master"
depends on (ARCH_PXA || PCI || ACPI)
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 8991ffce6e12..7274c0c344f9 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -62,8 +62,7 @@ obj-$(CONFIG_SPI_TI_QSPI) += spi-ti-qspi.o
obj-$(CONFIG_SPI_ORION) += spi-orion.o
obj-$(CONFIG_SPI_PL022) += spi-pl022.o
obj-$(CONFIG_SPI_PPC4xx) += spi-ppc4xx.o
-spi-pxa2xx-platform-objs := spi-pxa2xx.o
-spi-pxa2xx-platform-$(CONFIG_SPI_PXA2XX_DMA) += spi-pxa2xx-dma.o
+spi-pxa2xx-platform-objs := spi-pxa2xx.o spi-pxa2xx-dma.o
obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx-platform.o
obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o
obj-$(CONFIG_SPI_QUP) += spi-qup.o
diff --git a/drivers/spi/spi-pxa2xx.h b/drivers/spi/spi-pxa2xx.h
index 58efa98313aa..8e781c8b4374 100644
--- a/drivers/spi/spi-pxa2xx.h
+++ b/drivers/spi/spi-pxa2xx.h
@@ -147,20 +147,9 @@ static inline void write_SSSR_CS(struct driver_data *drv_data, u32 val)
extern int pxa2xx_spi_flush(struct driver_data *drv_data);
extern void *pxa2xx_spi_next_transfer(struct driver_data *drv_data);
-/*
- * Select the right DMA implementation.
- */
-#if defined(CONFIG_SPI_PXA2XX_DMA)
-#define SPI_PXA2XX_USE_DMA 1
#define MAX_DMA_LEN SZ_64K
#define DEFAULT_DMA_CR1 (SSCR1_TSRE | SSCR1_RSRE | SSCR1_TRAIL)
-#else
-#undef SPI_PXA2XX_USE_DMA
-#define MAX_DMA_LEN 0
-#define DEFAULT_DMA_CR1 0
-#endif
-#ifdef SPI_PXA2XX_USE_DMA
extern bool pxa2xx_spi_dma_is_possible(size_t len);
extern int pxa2xx_spi_map_dma_buffers(struct driver_data *drv_data);
extern irqreturn_t pxa2xx_spi_dma_transfer(struct driver_data *drv_data);
@@ -173,29 +162,5 @@ extern int pxa2xx_spi_set_dma_burst_and_threshold(struct chip_data *chip,
u8 bits_per_word,
u32 *burst_code,
u32 *threshold);
-#else
-static inline bool pxa2xx_spi_dma_is_possible(size_t len) { return false; }
-static inline int pxa2xx_spi_map_dma_buffers(struct driver_data *drv_data)
-{
- return 0;
-}
-#define pxa2xx_spi_dma_transfer NULL
-static inline void pxa2xx_spi_dma_prepare(struct driver_data *drv_data,
- u32 dma_burst) {}
-static inline void pxa2xx_spi_dma_start(struct driver_data *drv_data) {}
-static inline int pxa2xx_spi_dma_setup(struct driver_data *drv_data)
-{
- return 0;
-}
-static inline void pxa2xx_spi_dma_release(struct driver_data *drv_data) {}
-static inline int pxa2xx_spi_set_dma_burst_and_threshold(struct chip_data *chip,
- struct spi_device *spi,
- u8 bits_per_word,
- u32 *burst_code,
- u32 *threshold)
-{
- return -ENODEV;
-}
-#endif
#endif /* SPI_PXA2XX_H */
--
2.6.4
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2016-01-13 14:20 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-13 14:20 Jarkko Nikula [this message]
[not found] ` <1452694807-29304-1-git-send-email-jarkko.nikula-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2016-01-15 18:19 ` Applied "spi: pxa2xx: Remove CONFIG_SPI_PXA2XX_DMA" to the spi tree Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1452694807-29304-1-git-send-email-jarkko.nikula@linux.intel.com \
--to=jarkko.nikula-vuqaysv1563yd54fqh9/ca@public.gmane.org \
--cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=daniel-cYrQPVfZoowdnm+yROfE0A@public.gmane.org \
--cc=haojian.zhuang-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=robert.jarzmik-GANU6spQydw@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).