From mboxrd@z Thu Jan 1 00:00:00 1970 From: Franklin S Cooper Jr Subject: [RFC] [PATCH v2 2/3] spi: omap2-mcspi: Add comments for RX only DMA buffer workaround Date: Mon, 27 Jun 2016 09:54:08 -0500 Message-ID: <1467039249-7816-3-git-send-email-fcooper@ti.com> References: <1467039249-7816-1-git-send-email-fcooper@ti.com> Cc: Franklin S Cooper Jr To: david.s.gordon-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org, axboe-b10kYP2dOMg@public.gmane.org, akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org, ming.l-Vzezgt5dB6uUEJcrhfAQsw@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, nsekhar-l0cyMroinI0@public.gmane.org, peter.ujfalusi-l0cyMroinI0@public.gmane.org Return-path: In-Reply-To: <1467039249-7816-1-git-send-email-fcooper-l0cyMroinI0@public.gmane.org> Sender: linux-spi-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-ID: OMAP35x and OMAP37x mentions in the McSPI End-of-Transfer Sequences section that if the McSPI is configured as a Master and only DMA RX is being performed then the DMA transfer size needs to be reduced by 1 or 2. This was originally implemented by: commit 57c5c28dbc83 ("spi: omap2_mcspi rxdma bugfix") This patch adds comments to clarify what is going on in the code since its not obvious what problem its addressing. Signed-off-by: Franklin S Cooper Jr --- drivers/spi/spi-omap2-mcspi.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c index 1d237e9..c47f958 100644 --- a/drivers/spi/spi-omap2-mcspi.c +++ b/drivers/spi/spi-omap2-mcspi.c @@ -459,6 +459,11 @@ omap2_mcspi_rx_dma(struct spi_device *spi, struct spi_transfer *xfer, count = xfer->len; dma_count = xfer->len; + /* + * In the "End-of-Transfer Procedure" section for DMA RX in OMAP35x TRM + * it mentions reducing DMA transfer length by one element in master + * normal mode. + */ if (mcspi->fifo_depth == 0) dma_count -= es; @@ -478,6 +483,10 @@ omap2_mcspi_rx_dma(struct spi_device *spi, struct spi_transfer *xfer, dmaengine_slave_config(mcspi_dma->dma_rx, &cfg); + /* + * Reduce DMA transfer length by one more if McSPI is + * configured in turbo mode. + */ if ((l & OMAP2_MCSPI_CHCONF_TURBO) && mcspi->fifo_depth == 0) dma_count -= es; @@ -507,6 +516,10 @@ omap2_mcspi_rx_dma(struct spi_device *spi, struct spi_transfer *xfer, if (mcspi->fifo_depth > 0) return count; + /* + * Due to the DMA transfer length reduction the missing bytes must + * be read manually to receive all of the expected data. + */ omap2_mcspi_set_enable(spi, 0); elements = element_count - 1; -- 2.7.0 -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html