From: Jayachandran C <jnair-M3mlKVOIwJVv6pq1l3V1OdBPR1lH4CV8@public.gmane.org>
To: linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-acpi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
"Rafael J. Wysocki" <rjw-LthD3rsA81gm4RdzfppkhA@public.gmane.org>,
Kamlakant.Patel-YGCgFSpz5w/QT0dZR+AlfA@public.gmane.org
Cc: Jayachandran C <jnair-M3mlKVOIwJVv6pq1l3V1OdBPR1lH4CV8@public.gmane.org>
Subject: [PATCH] spi: xlp: update for ARCH_VULCAN2
Date: Sun, 12 Mar 2017 11:11:43 +0000 [thread overview]
Message-ID: <1489317103-5329-1-git-send-email-jnair@caviumnetworks.com> (raw)
ARCH_VULCAN arm64 platform (for Broadcom Vulcan ARM64 processors) has
been discontinued. Cavium's ThunderX2 CN99XX (ARCH_THUNDER2) will be
the next revision of the platform.
Update compile dependencies and ACPI ID to reflect this change. There
is not need to retain ARCH_VULCAN since the Vulcan processor was never
in production and ARCH_VULCAN will be deleted soon.
Signed-off-by: Jayachandran C <jnair-M3mlKVOIwJVv6pq1l3V1OdBPR1lH4CV8@public.gmane.org>
---
[ I am keeping both changes in the same patch hoping it will go in thru
the SPI maintainer, but I can split this to 2 if needed]
drivers/acpi/acpi_apd.c | 1 +
drivers/spi/Kconfig | 2 +-
drivers/spi/spi-xlp.c | 1 +
3 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/acpi/acpi_apd.c b/drivers/acpi/acpi_apd.c
index 26696b6..17a1eb1 100644
--- a/drivers/acpi/acpi_apd.c
+++ b/drivers/acpi/acpi_apd.c
@@ -169,6 +169,7 @@ static const struct acpi_device_id acpi_apd_device_ids[] = {
#ifdef CONFIG_ARM64
{ "APMC0D0F", APD_ADDR(xgene_i2c_desc) },
{ "BRCM900D", APD_ADDR(vulcan_spi_desc) },
+ { "CAV900D", APD_ADDR(vulcan_spi_desc) },
#endif
{ }
};
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 25ae7f2e..1761c90 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -715,7 +715,7 @@ config SPI_XILINX
config SPI_XLP
tristate "Netlogic XLP SPI controller driver"
- depends on CPU_XLP || ARCH_VULCAN || COMPILE_TEST
+ depends on CPU_XLP || ARCH_THUNDER2 || COMPILE_TEST
help
Enable support for the SPI controller on the Netlogic XLP SoCs.
Currently supported XLP variants are XLP8XX, XLP3XX, XLP2XX, XLP9XX
diff --git a/drivers/spi/spi-xlp.c b/drivers/spi/spi-xlp.c
index bea7a93..80cb4d6 100644
--- a/drivers/spi/spi-xlp.c
+++ b/drivers/spi/spi-xlp.c
@@ -442,6 +442,7 @@ static int xlp_spi_probe(struct platform_device *pdev)
#ifdef CONFIG_ACPI
static const struct acpi_device_id xlp_spi_acpi_match[] = {
{ "BRCM900D", 0 },
+ { "CAV900D", 0 },
{ },
};
MODULE_DEVICE_TABLE(acpi, xlp_spi_acpi_match);
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2017-03-12 11:11 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-12 11:11 Jayachandran C [this message]
2017-03-13 16:57 ` Applied "spi: xlp: update for ARCH_VULCAN2" to the spi tree Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1489317103-5329-1-git-send-email-jnair@caviumnetworks.com \
--to=jnair-m3mlkvoiwjvv6pq1l3v1odbpr1lh4cv8@public.gmane.org \
--cc=Kamlakant.Patel-YGCgFSpz5w/QT0dZR+AlfA@public.gmane.org \
--cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=linux-acpi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=rjw-LthD3rsA81gm4RdzfppkhA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox