From: Varadarajan Narayanan <varada@codeaurora.org>
To: broonie@kernel.org, robh+dt@kernel.org, mark.rutland@arm.com,
andy.gross@linaro.org, david.brown@linaro.org,
linux-spi@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-soc@vger.kernel.org
Cc: Varadarajan Narayanan <varada@codeaurora.org>,
Matthew McClintock <mmcclint@codeaurora.org>
Subject: [PATCH 11/18] spi: qup: properly detect extra interrupts
Date: Wed, 14 Jun 2017 11:22:24 +0530 [thread overview]
Message-ID: <1497419551-21834-12-git-send-email-varada@codeaurora.org> (raw)
In-Reply-To: <1497419551-21834-1-git-send-email-varada@codeaurora.org>
It's possible for a SPI transaction to complete and get another
interrupt and have it processed on the same spi_transfer before the
transfer_one can set it to NULL.
This masks unexpected interrupts, so let's set the spi_transfer to
NULL in the interrupt once the transaction is done. So we can
properly detect these bad interrupts and print warning messages.
Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
---
drivers/spi/spi-qup.c | 20 +++++++++++---------
1 file changed, 11 insertions(+), 9 deletions(-)
diff --git a/drivers/spi/spi-qup.c b/drivers/spi/spi-qup.c
index bd53e82..1a2a9d9 100644
--- a/drivers/spi/spi-qup.c
+++ b/drivers/spi/spi-qup.c
@@ -496,13 +496,13 @@ static irqreturn_t spi_qup_qup_irq(int irq, void *dev_id)
struct spi_qup *controller = dev_id;
struct spi_transfer *xfer;
u32 opflags, qup_err, spi_err;
- unsigned long flags;
int error = 0;
+ bool done = 0;
- spin_lock_irqsave(&controller->lock, flags);
+ spin_lock(&controller->lock);
xfer = controller->xfer;
controller->xfer = NULL;
- spin_unlock_irqrestore(&controller->lock, flags);
+ spin_unlock(&controller->lock);
qup_err = readl_relaxed(controller->base + QUP_ERROR_FLAGS);
spi_err = readl_relaxed(controller->base + SPI_ERROR_FLAGS);
@@ -556,16 +556,19 @@ static irqreturn_t spi_qup_qup_irq(int irq, void *dev_id)
spi_qup_write(controller, xfer);
}
- spin_lock_irqsave(&controller->lock, flags);
- controller->error = error;
- controller->xfer = xfer;
- spin_unlock_irqrestore(&controller->lock, flags);
-
/* re-read opflags as flags may have changed due to actions above */
opflags = readl_relaxed(controller->base + QUP_OPERATIONAL);
if ((controller->rx_bytes == xfer->len &&
(opflags & QUP_OP_MAX_INPUT_DONE_FLAG)) || error)
+ done = true;
+
+ spin_lock(&controller->lock);
+ controller->error = error;
+ controller->xfer = done ? NULL : xfer;
+ spin_unlock(&controller->lock);
+
+ if (done)
complete(&controller->done);
return IRQ_HANDLED;
@@ -765,7 +768,6 @@ static int spi_qup_transfer_one(struct spi_master *master,
exit:
spi_qup_set_state(controller, QUP_STATE_RESET);
spin_lock_irqsave(&controller->lock, flags);
- controller->xfer = NULL;
if (!ret)
ret = controller->error;
spin_unlock_irqrestore(&controller->lock, flags);
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
next prev parent reply other threads:[~2017-06-14 5:52 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-14 5:52 [PATCH 00/18] spi: qup: Fixes and add support for >64k transfers Varadarajan Narayanan
2017-06-14 5:52 ` [PATCH 01/18] spi: qup: Enable chip select support Varadarajan Narayanan
2017-06-14 9:47 ` Stanimir Varbanov
2017-08-08 11:18 ` Applied "spi: qup: Enable chip select support" to the spi tree Mark Brown
2017-06-14 5:52 ` [PATCH 03/18] spi: qup: Add completion timeout for dma mode Varadarajan Narayanan
2017-06-14 5:52 ` [PATCH 04/18] spi: qup: Add completion timeout for fifo/block mode Varadarajan Narayanan
2017-06-14 5:52 ` [PATCH 05/18] spi: qup: Place the QUP in run mode before DMA transactions Varadarajan Narayanan
[not found] ` <1497419551-21834-1-git-send-email-varada-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2017-06-14 5:52 ` [PATCH 02/18] spi: qup: Setup DMA mode correctly Varadarajan Narayanan
2017-08-08 11:18 ` Applied "spi: qup: Setup DMA mode correctly" to the spi tree Mark Brown
2017-06-14 5:52 ` [PATCH 06/18] spi: qup: Fix error handling in spi_qup_prep_sg Varadarajan Narayanan
2017-06-14 5:52 ` [PATCH 07/18] spi: qup: Fix transaction done signaling Varadarajan Narayanan
2017-06-14 7:13 ` Sricharan R
[not found] ` <4b81a4c7-b85c-a35d-15fb-4aaaec3c7e8c-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2017-06-14 19:51 ` Andy Gross
[not found] ` <20170614195155.GB32733-5taXn+FmohyKb9UB7mSz9QC/G2K4zDHf@public.gmane.org>
2017-06-15 5:14 ` Sricharan R
2017-06-14 5:52 ` [PATCH 08/18] spi: qup: Handle v1 dma completion differently Varadarajan Narayanan
[not found] ` <1497419551-21834-9-git-send-email-varada-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2017-06-14 7:15 ` Sricharan R
[not found] ` <a0e499a7-8f89-96d6-9463-c2b3f774cd6d-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2017-06-14 19:53 ` Andy Gross
2017-06-14 5:52 ` [PATCH 09/18] spi: qup: Do block sized read/write in block mode Varadarajan Narayanan
2017-06-14 5:52 ` [PATCH 10/18] spi: qup: Fix DMA mode interrupt handling Varadarajan Narayanan
2017-06-14 7:21 ` Sricharan R
[not found] ` <66ba7dfb-6ff3-884e-6db0-8d5191f87c93-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2017-06-14 20:06 ` Andy Gross
2017-06-15 5:52 ` Sricharan R
2017-06-14 5:52 ` Varadarajan Narayanan [this message]
[not found] ` <1497419551-21834-12-git-send-email-varada-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2017-06-14 7:27 ` [PATCH 11/18] spi: qup: properly detect extra interrupts Sricharan R
2017-06-14 19:59 ` Andy Gross
[not found] ` <20170614195953.GD32733-5taXn+FmohyKb9UB7mSz9QC/G2K4zDHf@public.gmane.org>
2017-06-14 21:51 ` Matthew McClintock
2017-06-15 5:27 ` Sricharan R
2017-06-14 5:52 ` [PATCH 12/18] spi: qup: refactor spi_qup_io_config into two functions Varadarajan Narayanan
2017-06-14 5:52 ` [PATCH 13/18] spi: qup: call io_config in mode specific function Varadarajan Narayanan
2017-06-14 5:52 ` [PATCH 14/18] spi: qup: allow block mode to generate multiple transactions Varadarajan Narayanan
2017-06-14 5:52 ` [PATCH 15/18] spi: qup: refactor spi_qup_prep_sg Varadarajan Narayanan
2017-06-14 5:52 ` [PATCH 16/18] spi: qup: allow multiple DMA transactions per spi xfer Varadarajan Narayanan
2017-06-14 5:52 ` [PATCH 17/18] spi: qup: Ensure done detection Varadarajan Narayanan
2017-06-14 5:52 ` [PATCH 18/18] spi: qup: support for qup v1 dma Varadarajan Narayanan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1497419551-21834-12-git-send-email-varada@codeaurora.org \
--to=varada@codeaurora.org \
--cc=andy.gross@linaro.org \
--cc=broonie@kernel.org \
--cc=david.brown@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mmcclint@codeaurora.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).