[PATCH 03/18] spi: qup: Add completion timeout for dma mode

[Varadarajan Narayanan <varada@codeaurora.org>]

Use different 'completion' structures to track the completion
of DMA Tx/Rx and PIO.

Signed-off-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
---
 drivers/spi/spi-qup.c | 41 ++++++++++++++++++++++++-----------------
 1 file changed, 24 insertions(+), 17 deletions(-)

diff --git a/drivers/spi/spi-qup.c b/drivers/spi/spi-qup.c
index abe799b..272e48e 100644
--- a/drivers/spi/spi-qup.c
+++ b/drivers/spi/spi-qup.c
@@ -142,6 +142,8 @@ struct spi_qup {
 
 	struct spi_transfer	*xfer;
 	struct completion	done;
+	struct completion	txc;
+	struct completion	rxc;
 	int			error;
 	int			w_size;	/* bytes per SPI word */
 	int			n_words;
@@ -283,16 +285,13 @@ static void spi_qup_fifo_write(struct spi_qup *controller,
 
 static void spi_qup_dma_done(void *data)
 {
-	struct spi_qup *qup = data;
-
-	complete(&qup->done);
+	complete(data);
 }
 
 static int spi_qup_prep_sg(struct spi_master *master, struct spi_transfer *xfer,
 			   enum dma_transfer_direction dir,
-			   dma_async_tx_callback callback)
+			   dma_async_tx_callback callback, void *data)
 {
-	struct spi_qup *qup = spi_master_get_devdata(master);
 	unsigned long flags = DMA_PREP_INTERRUPT | DMA_PREP_FENCE;
 	struct dma_async_tx_descriptor *desc;
 	struct scatterlist *sgl;
@@ -315,7 +314,7 @@ static int spi_qup_prep_sg(struct spi_master *master, struct spi_transfer *xfer,
 		return -EINVAL;
 
 	desc->callback = callback;
-	desc->callback_param = qup;
+	desc->callback_param = data;
 
 	cookie = dmaengine_submit(desc);
 
@@ -333,16 +332,12 @@ static void spi_qup_dma_terminate(struct spi_master *master,
 
 static int spi_qup_do_dma(struct spi_master *master, struct spi_transfer *xfer)
 {
-	dma_async_tx_callback rx_done = NULL, tx_done = NULL;
+	struct spi_qup *qup = spi_master_get_devdata(master);
 	int ret;
 
-	if (xfer->rx_buf)
-		rx_done = spi_qup_dma_done;
-	else if (xfer->tx_buf)
-		tx_done = spi_qup_dma_done;
-
 	if (xfer->rx_buf) {
-		ret = spi_qup_prep_sg(master, xfer, DMA_DEV_TO_MEM, rx_done);
+		ret = spi_qup_prep_sg(master, xfer, DMA_DEV_TO_MEM,
+					spi_qup_dma_done, &qup->rxc);
 		if (ret)
 			return ret;
 
@@ -350,13 +345,20 @@ static int spi_qup_do_dma(struct spi_master *master, struct spi_transfer *xfer)
 	}
 
 	if (xfer->tx_buf) {
-		ret = spi_qup_prep_sg(master, xfer, DMA_MEM_TO_DEV, tx_done);
+		ret = spi_qup_prep_sg(master, xfer, DMA_MEM_TO_DEV,
+					spi_qup_dma_done, &qup->txc);
 		if (ret)
 			return ret;
 
 		dma_async_issue_pending(master->dma_tx);
 	}
 
+	if (xfer->rx_buf && !wait_for_completion_timeout(&qup->rxc, timeout))
+		return -ETIMEDOUT;
+
+	if (xfer->tx_buf && !wait_for_completion_timeout(&qup->txc, timeout))
+		return -ETIMEDOUT;
+
 	return 0;
 }
 
@@ -622,7 +624,6 @@ static int spi_qup_transfer_one(struct spi_master *master,
 	timeout = DIV_ROUND_UP(xfer->len * 8, timeout);
 	timeout = 100 * msecs_to_jiffies(timeout);
 
-	reinit_completion(&controller->done);
 
 	spin_lock_irqsave(&controller->lock, flags);
 	controller->xfer     = xfer;
@@ -631,10 +632,14 @@ static int spi_qup_transfer_one(struct spi_master *master,
 	controller->tx_bytes = 0;
 	spin_unlock_irqrestore(&controller->lock, flags);
 
-	if (spi_qup_is_dma_xfer(controller->mode))
+	if (spi_qup_is_dma_xfer(controller->mode)) {
+		reinit_completion(&controller->rxc);
+		reinit_completion(&controller->txc);
 		ret = spi_qup_do_dma(master, xfer);
-	else
+	} else {
+		reinit_completion(&controller->done);
 		ret = spi_qup_do_pio(master, xfer);
+	}
 
 	if (ret)
 		goto exit;
@@ -860,6 +865,8 @@ static int spi_qup_probe(struct platform_device *pdev)
 		master->set_cs = spi_qup_set_cs;
 
 	spin_lock_init(&controller->lock);
+	init_completion(&controller->rxc);
+	init_completion(&controller->txc);
 	init_completion(&controller->done);
 
 	iomode = readl_relaxed(base + QUP_IO_M_MODES);
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation