From: sunil.m-fINqtvHxh+hg9hUCZPvPmw@public.gmane.org
To: broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org
Cc: linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
karthik-fINqtvHxh+hg9hUCZPvPmw@public.gmane.org,
Suniel Mahesh <sunil.m-fINqtvHxh+hg9hUCZPvPmw@public.gmane.org>
Subject: [PATCH] drivers: spi: Allocate bus number from spi framework
Date: Fri, 18 Aug 2017 11:13:40 +0530 [thread overview]
Message-ID: <1503035020-4347-1-git-send-email-sunil.m@techveda.org> (raw)
From: Suniel Mahesh <sunil.m-fINqtvHxh+hg9hUCZPvPmw@public.gmane.org>
spi framework should allocate bus number dynamically either
via Linux IDR or spi alias for master drivers. This patch deletes
code pertaining to manual allocation of spi bus number in spi omap2
master driver.
Signed-off-by: Suniel Mahesh <sunil.m-fINqtvHxh+hg9hUCZPvPmw@public.gmane.org>
Signed-off-by: Karthik Tummala <karthik-fINqtvHxh+hg9hUCZPvPmw@public.gmane.org>
Tested-by: Karthik Tummala <karthik-fINqtvHxh+hg9hUCZPvPmw@public.gmane.org>
---
Note:
- Patch was compile tested and built(ARCH=arm) on next-20170817.
- Patch was hardware tested on AM335x (McSPI controller) with
spi flash chips.
- Added spi aliases in aliases node, device tree and tested.
- No build/run-time issues reported.
- The commit:
"spi: Pick spi bus number from Linux idr or spi alias"
(SHA1:9b61e302210eba55768962f2f11e96bb508c2408)
has introduced bus numbering which happens dynamically either
via Linux IDR or spi alias for master drivers.
---
drivers/spi/spi-omap2-mcspi.c | 4 ----
1 file changed, 4 deletions(-)
diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
index e048268..9bf64e6 100644
--- a/drivers/spi/spi-omap2-mcspi.c
+++ b/drivers/spi/spi-omap2-mcspi.c
@@ -1338,7 +1338,6 @@ static int omap2_mcspi_probe(struct platform_device *pdev)
struct resource *r;
int status = 0, i;
u32 regs_offset = 0;
- static int bus_num = 1;
struct device_node *node = pdev->dev.of_node;
const struct of_device_id *match;
@@ -1374,14 +1373,11 @@ static int omap2_mcspi_probe(struct platform_device *pdev)
of_property_read_u32(node, "ti,spi-num-cs", &num_cs);
master->num_chipselect = num_cs;
- master->bus_num = bus_num++;
if (of_get_property(node, "ti,pindir-d0-out-d1-in", NULL))
mcspi->pin_dir = MCSPI_PINDIR_D0_OUT_D1_IN;
} else {
pdata = dev_get_platdata(&pdev->dev);
master->num_chipselect = pdata->num_cs;
- if (pdev->id != -1)
- master->bus_num = pdev->id;
mcspi->pin_dir = pdata->pin_dir;
}
regs_offset = pdata->regs_offset;
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2017-08-18 5:43 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-18 5:43 sunil.m-fINqtvHxh+hg9hUCZPvPmw [this message]
2017-08-18 11:15 ` [PATCH] drivers: spi: Allocate bus number from spi framework Mark Brown
[not found] ` <1503035020-4347-1-git-send-email-sunil.m-fINqtvHxh+hg9hUCZPvPmw@public.gmane.org>
2017-08-18 11:49 ` Applied "spi: omap: Allocate bus number from spi framework" to the spi tree Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1503035020-4347-1-git-send-email-sunil.m@techveda.org \
--to=sunil.m-finqtvhxh+hg9huczpvpmw@public.gmane.org \
--cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=karthik-fINqtvHxh+hg9hUCZPvPmw@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).