From mboxrd@z Thu Jan 1 00:00:00 1970 From: Claudiu Beznea Subject: [PATCH 13/16] dt-bindings: atmel-usart: add microchip,-usart Date: Wed, 8 Jan 2020 14:55:20 +0200 Message-ID: <1578488123-26127-14-git-send-email-claudiu.beznea@microchip.com> References: <1578488123-26127-1-git-send-email-claudiu.beznea@microchip.com> Mime-Version: 1.0 Content-Type: text/plain Cc: , , , , , , , , , , , Claudiu Beznea To: , , , , , , , , , , , , , , , , , , , , , , Return-path: In-Reply-To: <1578488123-26127-1-git-send-email-claudiu.beznea@microchip.com> Sender: netdev-owner@vger.kernel.org List-Id: linux-spi.vger.kernel.org Add microchip,-usart to DT bindings documentation. This is for microchip,sam9x60-usart. Signed-off-by: Claudiu Beznea --- Documentation/devicetree/bindings/mfd/atmel-usart.txt | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/mfd/atmel-usart.txt b/Documentation/devicetree/bindings/mfd/atmel-usart.txt index 699fd3c9ace8..e5c7331abe09 100644 --- a/Documentation/devicetree/bindings/mfd/atmel-usart.txt +++ b/Documentation/devicetree/bindings/mfd/atmel-usart.txt @@ -1,10 +1,12 @@ * Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART) Required properties for USART: -- compatible: Should be "atmel,-usart" or "atmel,-dbgu" +- compatible: Should be "atmel,-usart", "microchip,-usart" or + "atmel,-dbgu". The compatible indicated will be the first SoC to support an additional mode or an USART new feature. - For the dbgu UART, use "atmel,-dbgu", "atmel,-usart" + For the dbgu UART, use "atmel,-dbgu", "atmel,-usart", + "microchip,-usart". - reg: Should contain registers location and length - interrupts: Should contain interrupt - clock-names: tuple listing input clock names. -- 2.7.4