From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
To: Geert Uytterhoeven <geert+renesas@glider.be>,
Magnus Damm <magnus.damm@gmail.com>,
Rob Herring <robh+dt@kernel.org>, Mark Brown <broonie@kernel.org>
Cc: linux-spi@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Prabhakar <prabhakar.csengg@gmail.com>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Subject: [PATCH 2/2] ARM: dts: r8a7742: Add MSIOF[0123] support
Date: Tue, 9 Jun 2020 21:54:14 +0100 [thread overview]
Message-ID: <1591736054-568-3-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com> (raw)
In-Reply-To: <1591736054-568-1-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com>
Add the DT nodes needed by MSIOF[0123] interfaces to the SoC dtsi.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
---
arch/arm/boot/dts/r8a7742.dtsi | 64 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 64 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7742.dtsi b/arch/arm/boot/dts/r8a7742.dtsi
index 08af9e2..08d89cf 100644
--- a/arch/arm/boot/dts/r8a7742.dtsi
+++ b/arch/arm/boot/dts/r8a7742.dtsi
@@ -853,6 +853,70 @@
status = "disabled";
};
+ msiof0: spi@e6e20000 {
+ compatible = "renesas,msiof-r8a7742",
+ "renesas,rcar-gen2-msiof";
+ reg = <0 0xe6e20000 0 0x0064>;
+ interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 0>;
+ dmas = <&dmac0 0x51>, <&dmac0 0x52>,
+ <&dmac1 0x51>, <&dmac1 0x52>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+ resets = <&cpg 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof1: spi@e6e10000 {
+ compatible = "renesas,msiof-r8a7742",
+ "renesas,rcar-gen2-msiof";
+ reg = <0 0xe6e10000 0 0x0064>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 208>;
+ dmas = <&dmac0 0x55>, <&dmac0 0x56>,
+ <&dmac1 0x55>, <&dmac1 0x56>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+ resets = <&cpg 208>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof2: spi@e6e00000 {
+ compatible = "renesas,msiof-r8a7742",
+ "renesas,rcar-gen2-msiof";
+ reg = <0 0xe6e00000 0 0x0064>;
+ interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 205>;
+ dmas = <&dmac0 0x41>, <&dmac0 0x42>,
+ <&dmac1 0x41>, <&dmac1 0x42>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+ resets = <&cpg 205>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof3: spi@e6c90000 {
+ compatible = "renesas,msiof-r8a7742",
+ "renesas,rcar-gen2-msiof";
+ reg = <0 0xe6c90000 0 0x0064>;
+ interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 215>;
+ dmas = <&dmac0 0x45>, <&dmac0 0x46>,
+ <&dmac1 0x45>, <&dmac1 0x46>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+ resets = <&cpg 215>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
rcar_sound: sound@ec500000 {
/*
* #sound-dai-cells is required
--
2.7.4
next prev parent reply other threads:[~2020-06-09 20:54 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-09 20:54 [PATCH 0/2] Add MSIOF support for R8A7742 SOC Lad Prabhakar
2020-06-09 20:54 ` [PATCH 1/2] dt-bindings: spi: renesas,sh-msiof: Add r8a7742 support Lad Prabhakar
2020-06-10 8:37 ` Geert Uytterhoeven
2020-06-10 11:08 ` Mark Brown
2020-06-10 11:59 ` Geert Uytterhoeven
2020-06-10 16:49 ` Mark Brown
2020-06-10 19:18 ` Geert Uytterhoeven
2020-06-11 8:50 ` Mark Brown
2020-06-11 12:09 ` Geert Uytterhoeven
2020-06-16 11:03 ` Mark Brown
2020-06-09 20:54 ` Lad Prabhakar [this message]
2020-06-26 8:53 ` [PATCH 2/2] ARM: dts: r8a7742: Add MSIOF[0123] support Geert Uytterhoeven
2020-06-15 23:41 ` [PATCH 0/2] Add MSIOF support for R8A7742 SOC Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1591736054-568-3-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com \
--to=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=prabhakar.csengg@gmail.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).