Patchwork housekeeping for: spi-devel-general

patchwork-bot+linux-spi
2020-05-25T04:00:18Z

Latest series: [v5] Enable ili9341 and l3gd20 on stm32f429-disco (2020-05-25T03:45:42)
Superseding: [v4] Enable ili9341 and l3gd20 on stm32f429-disco (2020-05-18T11:09:17):
[v4,1/8] ARM: dts: stm32: Add dma config for spi5
[v4,2/8] ARM: dts: stm32: enable l3gd20 on stm32429-disco board
[v4,3/8] spi: stm32: Add 'SPI_SIMPLEX_RX', 'SPI_3WIRE_RX' support for stm32f4
[v4,4/8] ARM: dts: stm32: Add pin map for ltdc on stm32f429-disco board
[v4,5/8] dt-bindings: display: panel: Add ilitek ili9341 panel bindings
[v4,6/8] ARM: dts: stm32: enable ltdc binding with ili9341 on stm32429-disco board
[v4,7/8] clk: stm32: Fix stm32f429's ltdc driver hang in set clock rate.
[v4,8/8] drm/panel: Add ilitek ili9341 panel driver
Superseding: [v5] Enable ili9341 and l3gd20 on stm32f429-disco (2020-05-25T03:40:54):
[v5,1/8] ARM: dts: stm32: Add dma config for spi5
[v5,2/8] ARM: dts: stm32: Add pin map for ltdc & spi5 on stm32f429-disco board
[v5,3/8] ARM: dts: stm32: enable ltdc binding with ili9341, gyro l3gd20 on stm32429-disco board
[v5,4/8] dt-bindings: display: panel: Add ilitek ili9341 panel bindings
[v5,5/8] clk: stm32: Fix stm32f429's ltdc driver hang in set clock rate, fix duplicated ltdc clock register to 'clk_core' case ltdc's clock turn off by clk_disable_unused()
[v5,6/8] drm/panel: Add ilitek ili9341 panel driver
[v5,7/8] spi: stm32: Add 'SPI_SIMPLEX_RX', 'SPI_3WIRE_RX' support for stm32f4
[v5,8/8] spi: flags 'SPI_CONTROLLER_MUST_RX' and 'SPI_CONTROLLER_MUST_TX' can't be coexit with 'SPI_3WIRE' mode

--
Deet-doot-dot, I am a bot.