From: Tony Lindgren <tony@atomide.com>
To: Cory Maccarrone <darkstar6262@gmail.com>
Cc: spi-devel-general@lists.sourceforge.net, linux-omap@vger.kernel.org
Subject: Re: [PATCH v2 2/3] [OMAP] Add spi100k configuration to OMAP1
Date: Wed, 6 Jan 2010 11:19:47 -0800 [thread overview]
Message-ID: <20100106191946.GB11511@atomide.com> (raw)
In-Reply-To: <1260668088-27555-3-git-send-email-darkstar6262@gmail.com>
[-- Attachment #1: Type: text/plain, Size: 1651 bytes --]
Hi,
* Cory Maccarrone <darkstar6262@gmail.com> [091212 17:35]:
> This change implements the clocks, platform driver, and register
> information necessary to use the spi100k bus with OMAP 7xx systems.
>
> The clocks added are dummy clocks because, although we're pretty
> sure there are clocks used for SPI, all current booting methods result
> in proper operation without the enabling of any other clocks.
Looks like the driver is in mainline, so let's try to make it working..
> --- a/arch/arm/mach-omap1/devices.c
> +++ b/arch/arm/mach-omap1/devices.c
> @@ -196,6 +198,37 @@ void __init omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
>
> /*-------------------------------------------------------------------------*/
>
> +/* OMAP7xx SPI support */
> +#if defined(CONFIG_SPI_OMAP_100K) || defined(CONFIG_SPI_OMAP_100K_MODULE)
> +
> +struct platform_device omap_spi1 = {
> + .name = "omap1_spi100k",
> + .id = 1,
> +};
> +
> +struct platform_device omap_spi2 = {
> + .name = "omap1_spi100k",
> + .id = 2,
> +};
> +
> +static void omap_init_spi100k(void)
> +{
> + omap_spi1.dev.platform_data = ioremap(OMAP7XX_SPI1_BASE, 0x7ff);
> + BUG_ON(!omap_spi1.dev.platform_data);
> +
> + omap_spi2.dev.platform_data = ioremap(OMAP7XX_SPI2_BASE, 0x7ff);
> + BUG_ON(!omap_spi2.dev.platform_data);
> +
> + platform_device_register(&omap_spi1);
> + platform_device_register(&omap_spi2);
> +}
I've updated your patch to just check the return value of ioremap instead
of BUG_ON. I've also merged it with the mux patch, see below. Can you
please try it out and make sure everything is OK?
Regards,
Tony
[-- Attachment #2: 7xx-spi.patch --]
[-- Type: text/x-diff, Size: 4906 bytes --]
>From b6e8076018f8a492c225114d517b2d4a0408ea4c Mon Sep 17 00:00:00 2001
From: Cory Maccarrone <darkstar6262@gmail.com>
Date: Sun, 13 Dec 2009 01:34:48 +0000
Subject: [PATCH] omap1: Add 7xx clocks and pin muxes for SPI
Commit 35c9049b27040d09461bc90928ad770be7ddf661 added
drivers/spi/omap_spi_100k.c.
This patch add the related clocks and pin muxing
entries to make the driver work on omap7xx platforms.
Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index 31fba07..2ac5796 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -658,6 +658,10 @@ static struct omap_clk omap_clks[] = {
CLK("i2c_omap.1", "fck", &i2c_fck, CK_16XX | CK_1510 | CK_310 | CK_7XX),
CLK("i2c_omap.1", "ick", &i2c_ick, CK_16XX),
CLK("i2c_omap.1", "ick", &dummy_ck, CK_1510 | CK_310 | CK_7XX),
+ CLK("omap1_spi100k.1", "fck", &dummy_ck, CK_7XX),
+ CLK("omap1_spi100k.1", "ick", &dummy_ck, CK_7XX),
+ CLK("omap1_spi100k.2", "fck", &dummy_ck, CK_7XX),
+ CLK("omap1_spi100k.2", "ick", &dummy_ck, CK_7XX),
CLK("omap_uwire", "fck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310),
CLK("omap-mcbsp.1", "ick", &dspper_ck, CK_16XX),
CLK("omap-mcbsp.1", "ick", &dummy_ck, CK_1510 | CK_310),
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index 23ded2d..17ebb47 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -14,6 +14,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/spi/spi.h>
#include <mach/hardware.h>
#include <asm/mach/map.h>
@@ -23,6 +24,7 @@
#include <plat/mux.h>
#include <mach/gpio.h>
#include <plat/mmc.h>
+#include <plat/omap7xx.h>
/*-------------------------------------------------------------------------*/
@@ -196,6 +198,38 @@ void __init omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
/*-------------------------------------------------------------------------*/
+/* OMAP7xx SPI support */
+#if defined(CONFIG_SPI_OMAP_100K) || defined(CONFIG_SPI_OMAP_100K_MODULE)
+
+struct platform_device omap_spi1 = {
+ .name = "omap1_spi100k",
+ .id = 1,
+};
+
+struct platform_device omap_spi2 = {
+ .name = "omap1_spi100k",
+ .id = 2,
+};
+
+static void omap_init_spi100k(void)
+{
+ omap_spi1.dev.platform_data = ioremap(OMAP7XX_SPI1_BASE, 0x7ff);
+ if (omap_spi1.dev.platform_data)
+ platform_device_register(&omap_spi1);
+
+ omap_spi2.dev.platform_data = ioremap(OMAP7XX_SPI2_BASE, 0x7ff);
+ ifi (omap_spi2.dev.platform_data)
+ platform_device_register(&omap_spi2);
+}
+
+#else
+static inline void omap_init_spi100k(void)
+{
+}
+#endif
+
+/*-------------------------------------------------------------------------*/
+
#if defined(CONFIG_OMAP_STI)
#define OMAP1_STI_BASE 0xfffea000
@@ -263,6 +297,7 @@ static int __init omap1_init_devices(void)
omap_init_mbox();
omap_init_rtc();
+ omap_init_spi100k();
omap_init_sti();
return 0;
diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c
index 07212cc..8434137 100644
--- a/arch/arm/mach-omap1/mux.c
+++ b/arch/arm/mach-omap1/mux.c
@@ -62,6 +62,14 @@ MUX_CFG_7XX("MMC_7XX_DAT0", 2, 17, 0, 16, 1, 0)
/* I2C interface */
MUX_CFG_7XX("I2C_7XX_SCL", 5, 1, 0, 0, 1, 0)
MUX_CFG_7XX("I2C_7XX_SDA", 5, 5, 0, 0, 1, 0)
+
+/* SPI pins */
+MUX_CFG_7XX("SPI_7XX_1", 6, 5, 4, 4, 1, 0)
+MUX_CFG_7XX("SPI_7XX_2", 6, 9, 4, 8, 1, 0)
+MUX_CFG_7XX("SPI_7XX_3", 6, 13, 4, 12, 1, 0)
+MUX_CFG_7XX("SPI_7XX_4", 6, 17, 4, 16, 1, 0)
+MUX_CFG_7XX("SPI_7XX_5", 8, 25, 0, 24, 0, 0)
+MUX_CFG_7XX("SPI_7XX_6", 9, 5, 0, 4, 0, 0)
};
#define OMAP7XX_PINS_SZ ARRAY_SIZE(omap7xx_pins)
#else
diff --git a/arch/arm/plat-omap/include/plat/mux.h b/arch/arm/plat-omap/include/plat/mux.h
index 8f069cc..692c90e 100644
--- a/arch/arm/plat-omap/include/plat/mux.h
+++ b/arch/arm/plat-omap/include/plat/mux.h
@@ -183,6 +183,14 @@ enum omap7xx_index {
/* I2C */
I2C_7XX_SCL,
I2C_7XX_SDA,
+
+ /* SPI */
+ SPI_7XX_1,
+ SPI_7XX_2,
+ SPI_7XX_3,
+ SPI_7XX_4,
+ SPI_7XX_5,
+ SPI_7XX_6,
};
enum omap1xxx_index {
diff --git a/arch/arm/plat-omap/include/plat/omap7xx.h b/arch/arm/plat-omap/include/plat/omap7xx.h
index 53f5241..48e4757 100644
--- a/arch/arm/plat-omap/include/plat/omap7xx.h
+++ b/arch/arm/plat-omap/include/plat/omap7xx.h
@@ -46,6 +46,9 @@
#define OMAP7XX_DSPREG_SIZE SZ_128K
#define OMAP7XX_DSPREG_START 0xE1000000
+#define OMAP7XX_SPI1_BASE 0xfffc0800
+#define OMAP7XX_SPI2_BASE 0xfffc1000
+
/*
* ----------------------------------------------------------------------------
* OMAP7XX specific configuration registers
next prev parent reply other threads:[~2010-01-06 19:19 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-12-13 1:34 [PATCH v2 0/3] Add spi100k driver and arch support Cory Maccarrone
2009-12-13 1:34 ` [PATCH v3 1/3] [SPI] [OMAP] Add OMAP spi100k driver Cory Maccarrone
2009-12-13 1:34 ` [PATCH v2 2/3] [OMAP] Add spi100k configuration to OMAP1 Cory Maccarrone
2010-01-06 19:19 ` Tony Lindgren [this message]
2010-01-09 17:14 ` Cory Maccarrone
2009-12-13 1:34 ` [PATCH v2 3/3] [OMAP] Add OMAP 7xx pin muxes for SPI Cory Maccarrone
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100106191946.GB11511@atomide.com \
--to=tony@atomide.com \
--cc=darkstar6262@gmail.com \
--cc=linux-omap@vger.kernel.org \
--cc=spi-devel-general@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).